A bath screen is a stylish and effective solution. Making a screen for the bathroom with your own hands Making a protective screen for the bathroom

A bath screen is a structure made from various materials and is used to hide communications. From a design point of view, there are several options for such protective panels, which allows you to choose the most suitable product for a specific interior. Screens allow you not only to protect pipes from moisture, but also to decorate a room, making it more functional and original.

Today, bath screens are classified into two main groups:

Solid;

sliding

Solid models are the most common and are characterized by simplicity. However, the simplicity of the design does not affect its effectiveness. The cladding of such a product, as a rule, is made with the same materials as the rest of the room (for example, tiles). Thanks to this, the panel fits organically into the interior of the bathroom.

Sliding models, in turn, are more functional. The design of such screens allows you to organize shelves under the bathroom for storing household chemicals and other household items. You can buy a screen for a sliding bathtub in any construction hypermarket or specialized store. It is also easy to choose and order the product you like via the Internet.

Advantages and disadvantages of solid models

Arranging a solid screen in the bathroom allows you to achieve harmony in the interior of the room. The cladding for such a screen can be very different, but most often they use decorative tiles or mosaic. Products lined with mosaics look the most aesthetically pleasing. Let's look at the advantages of solid models in more detail:

this design has a long service life;
Solid tile bath screens are easy to clean. To clean the dirt, just use a damp cloth or sponge.

However, such panels also have some disadvantages that are worth paying attention to:

in some cases, the small dimensions of the viewing window are not enough to carry out repair work under the bath;
inability to store household chemicals under the bathroom;
If such a panel is available, replacing the bowl is accompanied by some difficulties, since the structure will have to be dismantled.

Pay attention! To access the communications located under the bathtub bowl, it is necessary to install an inspection hatch of sufficient size. If there is such a hatch, there are no problems with repairing pipes, since dismantling the shielding is eliminated.

Thus, a continuous screen is great solution for the interior of the bathroom, but its use is associated with some inconveniences.

Bath screen sizes

Protective panels differ not only in their design, but also in size. There are both standard and non-standard screen models. Today, the minimum length of these products is 105 cm, and the maximum can reach 190 cm.

Let's look at the dimensions of the most common screens:

length – 150, 170 cm;
width – from 50 to 56 cm;
thickness – 3 mm.

Less common model sizes are 160, 180 and 190 cm. Shielding custom bathtubs It is much more difficult to complete, since it is not always possible to find a suitable product on sale. Bath screens 150 cm are the most common and are easy to install.

Solid panels are equipped with legs, which are necessary for adjusting or adjusting the product. Bath screens 170 cm are also standard and are used much more often than models whose length is 180 or 190 cm.

Screen design differences

The construction market offers many varieties of such panels to suit every taste. They differ in design and functionality. Many companies are engaged in the production of custom bath screens, which allows us to say with confidence that there is a large selection of these products.

Let's consider the types of such protective panels, depending on the design features:

standard;
multifunctional;
end

Standard models are the most common and consist of a plastic panel for which a frame of appropriate dimensions is selected. The multifunctional version differs from the standard one in that it has the ability to adjust the size of the screen under the bath (due to the legs). End panels are used to hide only a certain part of the bathroom.

Useful advice! Today you can find products equipped with various auxiliary elements that are necessary for convenience. Such products include panels with shelves, handles for people with limited mobility, as well as screens that include a hole for the legs.

Photos of screens for bathtubs can be easily found on the Internet, which greatly simplifies their selection.

Related article:

Types, advantages and disadvantages of sliding screens. Selection rules. Do-it-yourself assembly and installation of a sliding screen.

Features of plastic models

Plastic shielding options are the most popular today. They are distinguished by their attractive cost, as well as ease of installation and operation. The service life of such panels can reach 10 years (provided they are properly cared for). Plastic screens are resistant to moisture and do not rot over time.

The main advantage of panels made of this material is variety color solutions. This is due to the ease of production of products from polymers. The functionality of such screens may also differ. In specialized stores you can buy plastic screens for bathtubs with shelves, sliding, solid, removable, folding, etc.

If desired, you can perform shielding yourself. To do this, you will need inexpensive polymer lining. Such a panel does not require additional facing work, which has a positive effect on financial costs. To fix the plastic lining, it is necessary to mount a profile made of wood or metal.

The main disadvantage of plastic screens of any type is their poor resistance to mechanical stress (shocks). At self-installation plastic solid screen, you need to take care of organizing the door under the bathtub for quick access to hidden communications. You can make a special door yourself or purchase it in a store.

Acrylic bath screens

A popular type of protective panels, which is often sold complete with the acrylic bathtubs themselves. Such products are made from plastic material, which is subsequently treated with an acrylic layer. All of them are individually designed. Therefore, experts do not recommend buying acrylic models separately from bathtubs, since finding a suitable option is almost impossible.

Acrylic panels are only suitable for installation under bathtubs made of the same material. In most cases, such panels are solid, however, other varieties can be found on sale. If it is not possible to purchase a suitable screen for a specific bathtub purchased previously, it is recommended to buy a custom-made screen for the bathtub.

Pay attention! Acrylic models have the same colors as the bathtub, which allows general design look organic.

One of the advantages can also be noted that such panels fit tightly to the sides of the bowl. The frame and fixing elements for fastening the panel are supplied to customers complete with the screen itself.

Screens made of MDF sheets and mirrors

MDF bath screen is most often used in classic design rooms, as they have a wood pattern. A wide range of colors and textures allows you to choose a product that will suit any interior. MDF shielding looks stylish and expensive, which often attracts buyers. However, when purchasing such a screen, you need to pay attention to two important points:

products made from this material are only suitable for standard, rectangular bathtubs;
MDF screens are produced by pressing sawdust, therefore they are not resistant to moisture. In order to solve this problem, it is necessary to choose a moisture-resistant material that is equipped with a protective film.

The demand for mirrored models is quite simple to explain. Most modern bathrooms are small in size, and a mirror surface can visually increase the space of a room. Such panels also add play of light. They can be mounted at different angles, and also equipped with special lighting (for example, neon).

In any case, the mirror screen looks very impressive. However, such panels are not without their drawbacks, including fragility and difficult maintenance. Drops of water and stains on a mirror surface are much more noticeable than on any other surface, so you will have to wipe them quite often.

You can make a screen from MDF with your own hands, which will be exactly the same as

Drywall bath screen

Panels that are made from plasterboard material are accessible and inexpensive price. Organizing plasterboard shielding is quite simple with your own hands. In most cases, after installing a plasterboard screen, it is covered with ceramic tiles.

Important! To screen the space under the bathtub, it is necessary to use a moisture-resistant type of plasterboard sheet.

Let's look at the process of installing screens for plasterboard bathtubs:

First of all, you need to assemble the frame. The material for assembling the frame is timber with dimensions of 40x40 mm. At this stage, fixing elements and metal corners are installed.
Next, markings are applied to the walls and floor, which are needed for orientation during the installation process.
After applying the markings, the slats are installed along them. The slats are installed in both vertical and horizontal planes.
Next, the front panel is cut out of the plasterboard sheet, onto which hinged hinges or latches are installed.
The product is installed and an inspection hole is made in it.

Ceramic screens for bathrooms

Ceramic shielding allows you to organically decorate your plumbing unit. The main advantage of organizing a ceramic protective panel is that it looks as presentable as possible. Ceramic tiles are the main finishing material when organizing plasterboard screens, as well as tongue-and-groove slabs. Ceramic tiles are resistant to moisture, easy to clean, and also resistant to mechanical stress.

Installing a screen under a tile bathtub is quite simple. To carry out installation, you do not need to have special construction knowledge and skills.

first you need to take measurements (width and height of the opening under the bathroom);
Ceramic tiles are laid from the upper left corner. Very important point is that installation must be done strictly horizontally;
each individual tile element must be lubricated with tile adhesive;
The alignment of a ceramic screen consisting of tiles is carried out using special crosses. Such crosses are inserted into the gaps between the tiles and form the same distance for all structural elements;
Not only solid screens can be covered with tiles.

Bath curtain made of curtain fabric

People who have a hard bath panel installed constantly touch it with their feet. Bathtubs with such panels are inconvenient to clean. Using a curtain solves this problem.

Pay attention! This non-standard solution Suitable only for rooms with good ventilation, since the curtain is not able to protect the pipes from moist air.

Before purchasing a bathtub protection panel, you need to pay attention to the following points:

Before purchasing a panel, it is recommended to take measurements of the bathroom and bowl;
the choice of product design depends on two factors: the financial capabilities of the buyer and the dimensions of the bathroom. For example, it is not recommended to purchase folding screen models for bathrooms, the dimensions of which are standard. For small spaces, solid models are best;
a model with doors allows you not only to protect communications, but also to organize a small storage area under the bathroom for household chemicals and other items;

It is recommended to pay attention to the material from which the panel fittings are made. It is very important that the material has good resistance to corrosion;
the panel must be freely adjustable, so you need to check the legs before purchasing the product;
Aluminum is considered the optimal material for the panel frame;
MDF bathroom screens are suitable for rooms equipped with good ventilation system. Otherwise, due to stagnation of moisture, this material can quickly become unusable.

The design of the panel is selected depending on the individual preferences of the apartment owners. Assembling a bath screen with your own hands will save you a lot of money.

Riho baths

How to make a bathtub screen with your own hands from plasterboard and tiles

Before you start self-assembly For a solid panel, you need to prepare the following tools and materials:

drywall;
building level;
facing tiles;
grout for facing tile joints;
grinder, drill, screwdriver;
special sealing compound.

Assembling a plasterboard panel is a common activity. This is due to the availability of the material, financial benefits and ease of execution of the shield. The moisture-resistant plasterboard used for these purposes has good flexibility, which makes it possible to create a panel of non-standard shape.

How to make screens under the bathroom with your own hands? Let's consider the sequence of actions:

First the marking is done. Markings must be applied to the walls and floor, which will eliminate installation errors in the future.

At the second stage, it is necessary to form a frame structure for the panel. The frame can be made from wooden slats or metal profiles. To assemble the frame, you need a drill and a screwdriver.
After the frame is ready, it is necessary to sheathe it plasterboard sheets. For this, special self-tapping screws for drywall are used.
Next, you need to fill all the seams and joints in the resulting structure with a hermetic compound.
At this stage, the façade part of the plasterboard panel is treated with a primer.
At the end, the plasterboard panel is faced with ceramic tiles.

Useful advice! Experts recommend processing frame elements protective compounds. This is necessary to improve the moisture-resistant qualities of the structure.

Thus, assembling a panel for a plasterboard bathtub with your own hands is not difficult. And the finished screen will significantly improve the appearance of the bathroom. If necessary, you can buy bath screens in a specialized store or on the Internet.

Installation of a plastic or acrylic screen on a bathtub

As a rule, the panel comes with instructions, which must be studied before installing the screen under the bathtub. For designs that differ only in size, the assembly process will not be much different. The main differences in this case boil down to the fact that the legs for panels for a high bathtub have an additional headroom (about 5 cm).

Let's take a step-by-step look at how to install a screen under a bathtub:

Before installing this structure, it is recommended to fill the bath with water.
On external panel screen, it is necessary to install special handles, which are mounted for ease of use of the structure.
The legs of the product come separately. They must be inserted into the holes located on the bottom side of the screen.
Next, you need to place the panel under the side of the bathtub.
After this, the structure must be fixed using auxiliary components.

In some cases, the bathroom is distinguished by the fact that it has protruding communications or baseboards, the presence of which prevents the shield from completely covering the free space under the bathroom. How to install a screen under the bathtub in such a situation? It is best to measure the parameters of the protruding elements and make a corresponding hole in the screen. Then the screen will not bump into a protruding element of the plumbing unit. Of course, you can remodel a bathroom, but this more labor-intensive and expensive undertaking is not suitable for everyone.

How to install a screen on an acrylic bathtub?

To install the screen on an acrylic bathtub, you must adhere to the following work algorithm:

First of all, you need to make markings on the side and screen. The markings must correspond to the fixation points.
At the next stage, you need to place the shield against the bathtub at a certain angle of 30–40° and place its top between the side and the mount.
Next, the previously marked places on the side and the shield are drilled for screws.
At the end, the holes that must match are fixed with self-tapping screws.

Screens for acrylic bathtubs have good resistance to moisture and also have a long shelf life. Experts recommend that you carefully study the instructions before installing such a protective panel. The instructions describe all the necessary installation details.

Video of installing a screen on an acrylic bathtub

If you installed a bathtub, then you've probably already thought about how to hide all the communications underneath it. One of possible options- put up a screen. As a rule, this design is intended only to improve the aesthetics of the bathroom. Modern models Bathtubs are often supplied with screens. But, if you purchased a bathtub without such equipment, do not despair. You can always make the screen yourself.

Not everyone likes to cover the bathtub with various trims. A simple way to solve the problem is to purchase a bathtub with beautiful legs and treated, presentable sides. But it also happens that it is not possible to hide sewer and water supply structures.

Acrylic bathtubs usually come with ready-made screens that cover the space underneath to a minimum. Design features Such bathtubs differ from their cast iron/steel counterparts in that they do not form large voids underneath.

The space under the bathtub can be used more rationally by building a screen with shelves or sliding doors underneath it. So, you can store detergents under the bathroom, for example.

Among other things, such coverings help improve sanitary conditions in the bathroom. Thanks to them, moisture does not accumulate on the floor areas under the bathroom, which provokes the growth of bacteria and fungi.

Modern design developments provide the opportunity to decorate the bathtub in an original and beautiful way. With their help, you can create imitations of, for example, the underwater world or an aquarium.

In humid bathroom environments, it is important to use moisture-resistant materials. There are plenty of them on the market today. Among this many we can highlight:

brick;
MDF/OSB;
plastic;
installation of a ready-made kit consisting of a frame and sliding doors.

All materials, except plastic and the finished screen kit, must be finished after installation, for example, with plaster, tiles, wallpaper, etc.

Basic requirements for the material:

There must be an inspection opening to the main sewer and water supply units, closed with a door/plug.
The floor under the bathtub should be hermetically sealed from the rest of the bathroom. This is the only way to avoid the formation of dampness, and as a result, fungi and mold under the bathtub.
The bathtub should not rest on the screen because it is a non-load-bearing structure.
To prevent the screen from interfering with your feet, you need to arrange a recess in it, made at an angle.

If you have enough free space under the bathroom, make a screen with a drawer or small cabinet in which you can store detergents and household chemicals.

Screens are:

deaf;
with a niche for feet;
with sliding doors;
with an inspection door for troubleshooting plumbing problems.

When choosing a screen, the design features of the room, the personal preferences of the owner of the house/apartment, and financial capabilities are taken into account.

Drywall does not load the floor, unlike heavy brickwork. It is easy to process. A plasterboard structure can last from 20 to 25 years. If necessary, a plasterboard screen can be repaired by repairing the damage with putty or by replacing an entire fragment.

For these purposes, you need to use moisture-resistant drywall. Due to moderate vapor permeability, a plasterboard screen maintains an optimal level of humidity.

Working with gypsum board does not require any special equipment. Everything you need is usually included home kit tools.

In the process of design calculations, the availability of access to plumbing units should be taken into account. The inspection opening can be closed plastic sash. To make using the bathtub more comfortable, the lower part of the screen needs to be moved under the bathtub by 10–12 cm. The screen is not a supporting structure, as mentioned above, so it should not support the weight of the bathtub. The only thing is that if the design includes shelves or cabinets, then the frame must support their weight along with the filling.

First you need to install the supporting frame. The most affordable option is a system assembled from mounting timber, pre-treated with a preservative. Installation metal profile will cost you more, however, given its high operational properties the costs justify the investment.

No matter how you decide to install the gypsum screen, dowel fasteners will be used as fastening. The gypsum board is fixed with metal screws.

On the wall adjacent to the side of the bathtub, apply markings along which the side profile will be installed. If you use tiles as cladding, then make an additional indentation for this. It should be equal to the total thickness of the tile and panel. Mark the length of the bottom of the screen on the floor. To ensure accurate markings, use a plumb line or a building level.

Recesses for the feet are usually formed in the center of the bath at the bottom of the screen. The middle of the floor profile needs to be made into a U-shaped configuration. To do this, you need to install vertical posts with an appropriate slope.

Before installing drywall, install the profile in accordance with the markings. First of all, secure the UD profile. At the same time, place its lower part on a moisture-resistant sealant. Attach the vertical CD profile to the supporting profile at equal intervals of 60 cm. Where the inspection door will be installed, install additional racks.

To cut moisture resistant plasterboard use hand saw with fine teeth. This way, you will get a clean cut. When making a screen, it is important to ensure a distance from the side of the bath equal to 10 mm in depth. This will prevent the screen from coming into contact with water.

If the thickness of the frame walls is 0.55 mm, then to secure the drywall you need to use standard metal screws. If the thickness of the profile walls is 0.8 mm, then it is better to use fasteners with a drill tip.

Drywall can be finished with tiles, decorative plaster, film decor or moisture-resistant wallpaper.

Before making the frame, the profile needs to be given a semicircular shape. To do this, you need to make cuts on the metal profile and bend it. Make two such arcs. Secure them with self-tapping screws. Then install vertical slats, which will give the frame rigidity.

The frame should be installed at a certain recess from the side of the bathtub: the thickness of the gypsum board + the thickness of the tiles + the thickness of the glue.

In order for the drywall to acquire the desired shape, for example, to become arched, it must be slightly moistened and gradually bent. The tiles must be laid with elastic adhesive, and the distance between the slabs must be leveled with crosses during the laying process.

The principle of manufacturing the frame is indistinguishable from its counterpart, intended for installing gypsum board. The only difference is the need to install additional ventilation slots located on the opposite side of the inspection door. This should be a small slot covered with a plastic grill. Another option is to make neat round holes arranged in random order.

The space under the bathtub can be closed brick wall, tiled. Every person who knows how to handle household tools can cope with masonry. Laying should be done in ¼ or ½ bricks per cement-sand mortar in a ratio of 1:3.

Before laying, you need to mark the position of the screen taking into account the tiling. Ultimately, the edge of the bathtub should be flush with the screen. Lower the plumb line along the edge of the bathtub, and then mark a line from which the thickness of the tiles and masonry mortar will be laid down inside the bathtub. In accordance with this guideline, you need to do brickwork. In addition, the vertical lines of the screen structure should be marked on opposite walls of the bathroom.

If the bricks will not fit entirely at the top of the screen, they will need to be adjusted in height and thickness.

If you want to make a structure with a niche for feet in the masonry of the bottom row (or several rows), then you will have to leave an opening in the masonry, covered with steel strips up to 6 mm thick. This will ensure the retention of the bricks of the top row.

The niche can be made with an inclined wall. However, it is technically more difficult to carry out such masonry. To do this, mark the bottom contour of the niche on the floor. Mark the height and depth of the niche on paper. By connecting the dots you will have a pattern. It will be necessary to cut off the brick for the side walls. You can cut the brick with a grinder or a diamond wheel. The laying of an inclined wall is carried out by tying the bricks to the side walls and to each other.

The top row of sloping wall bricks must be brought to the level of the horizontal row, and then cut off with a grinder. You should end up with a horizontal line. The further masonry process is similar to the previous method.

After completing the masonry, an inspection door should be installed. To simplify the task, you can purchase one made of plastic from hardware store. Another option is to make it yourself from a galvanized/aluminum profile, which can then be covered with plastic panels or other finishing materials.

To make the frame, you will need to install a beam or metal profile, and then install the starting profile, onto which the plastic lining will be attached.

To make the structure more rigid, you need to install profiles in the middle of the screen. This should be taken into account, because the lining can deform and lose its shape from the slightest mechanical loads.

The lower profile must be screwed to the floor and treated with sealant. Plastic lining need to be cut into strips equal to the height of the screen. They need to be brought with their edges into the starting profile. So, gradually the entire screen will be filled with clapboard. You need to cut a rectangle at the location where the inspection door is installed. Then you can install the door, which can be purchased at the same store as the lining.

If you need additional shelves, you can install them under the bathtub. If you want to close them from prying eyes, install a sliding screen. It can be made so that the shelves open vertically.

Vertical structures are fixed to gas lifts or other fasteners used in furniture production.

If you have to choose one of the models of standard sliding screens and install it under the bathtub, then we suggest that you familiarize yourself with some of the features of the products of this plan. The standard length of screens is 1.5 and 1.7 m. Universal designs can be reduced in length. They come in heights of 50.6 cm, 55 and 56 cm. The structures are equipped with adjustable legs.

A simple version of a sliding screen is finished design, which consists of an aluminum/plastic frame with two panels. More complex models are additionally equipped with drawers with shelves for storing detergents and household chemicals. The panels are made of glass or plexiglass.

If you need to install a screen under the bath in a small room, then to visualize the increase in space, you can install a mirror structure.

Video

Photo

Each shower has its own individual qualities, special appearance, and convenience. To create interior design rooms need to take into account various practical requirements. First of all, this is due to the unsightly outlines of water pipes and other communications. with your own hands will help you get rid of this problem forever.

This barrier allows you to hide the unsightly appearance of the basement space. In addition, the sliding screen is a real element of the overall design of the shower room, so its decorative functions are highly valued. Today there are quite a lot of variations of products that are created from a variety of materials. Taking into account the varied design options, the room can be transformed beyond recognition.

What are screens for?

Sliding models allow you to make the most of usable area in the shower room. Regular panels or doors are not very convenient to use, as they take up quite a lot of space. In order to make a bathtub screen with your own hands, you need to purchase a regular bathtub with attractive supports. The sides of the product must be finished with a special material, which allows the bathhouse to have a presentable appearance.

Based on the location of communications in the shower room, it is necessary to select one or another screen model, product profile, as well as the size of the panels. Otherwise, there is a possibility that the selected frame will not fit. Water pipes They are always unpleasantly conspicuous, so the structure should be assembled only after careful measurements. Otherwise, it is possible to spoil the overall design of the bathroom, because ugly protrusions do not look very aesthetically pleasing.

However, there is another way out - buy a standard fence and do the covering of the panels yourself. Usually, when purchasing acrylic products, the installation of plumbing fixtures is carried out with ready-made doors. They allow you to close the basement while saving space, i.e. rational use, which eliminates the appearance of large voids, unlike cast iron or steel products.

In addition, there is another good reason - the possibility of using this space for domestic needs. Often household items, cleaning products or tools are stored in these niches. Here you can make wooden or plastic shelves for convenience.

Separately, it is worth noting that basement doors help get rid of the accumulation of dirt and dust in hard-to-reach places where microorganisms or insects usually develop.

Thus, the panels help get rid of various negative consequences caused by unsanitary conditions. TO undeniable advantages These products can be attributed to their attractive appearance, carefully crafted by designers. Modern technologies make it possible not only to deliver sliding doors under the bathroom, but also to decorate them in a stylish, colorful and unique way. This gives the shower its own personality, which distinguishes it from other rooms in the apartment.

What will you need?

How to make a screen for a bathtub, or rather, from what materials? To manufacture sliding panels, you will need a supporting structure in the form of a profile, as well as the main raw materials from which the composition will be created. In order to decide on the choice of material, you need to proceed from the operating conditions of the bathroom, as well as personal preferences. You can carefully think through the image, starting from the tools available.

MDF panels;
drywall;
plastic;
ceramics;
acrylic.

Separately, it is worth noting that sometimes it is allowed wooden elements, but they must be moisture resistant, for example, beech or bog oak. In addition, you should decide on the type of valves, i.e. the design itself. Screens come with sliding elements, with only one door, tightly closed, and also with a special niche for feet. All these parameters are very individual and suitable for different shower rooms and directly depend on the taste of the owner or his financial capabilities.

DIY installation. Plastic

In order to create a full-fledged screen, you need to purchase some tools. Usually they come with the necessary equipment and related materials. This will allow you to do all the work not only quickly, but also efficiently during self-installation. Devices should be selected based on the material itself, for example, for wood, you will need a saw or jigsaw, and for ceramic tiles, a glass cutter.

For plastic panels you need:

Wooden blocks to create a structure or supports.
Liquid nails for fastening various materials.
Lightweight UD profiles with their own fastenings.
Directly plastic blanks.

It is worth discussing some points separately, since often the bathrooms in most apartments have a combined appearance. This means that there is a need to take into account the sewerage design, i.e. toilet. The placed toilet represents an obstacle that must be carefully avoided when installing the screen and its subsequent use. The standard set of installation tools includes:

construction stapler;
perforator;
specialized knife for drywall;
screwdriver;
square

In order to install a screen that will follow all the contours of the bath, you need to measure a line or put markings that follow all the curves of the bath. Then, using screws, the profile made of metal or wooden blocks is attached to floor covering. Fastening is done from the inner edge, i.e. place where they will be installed plastic panels.Using liquid nails, the bathroom itself and the surrounding surface are not damaged. Wood blocks secured with self-tapping screws will be an ideal option for cladding with the chosen material.

Plastic strips are attached to the blocks, again using liquid nails. From below, a piece of plastic is attached to the top of the profile, since enough space should be left for plastic skirting board. Self-tapping screws designed for metal products are best suited for this. IN in this case It is necessary to pay attention to the final stage.

This is due to the fact that attaching the last strip is very difficult, since you need to have a certain skill. You should try to align the first and final parts, and then put them on the side panel. At the same time, the resulting structure must have sufficient tightness between the parts. This is checked by checking the shrinkage of the grooves.

Tile

A DIY bath screen can be assembled from various materials. One of these is tiles, which are used to decorate sliding panels. It has visual appeal and high performance qualities. In addition, tiles are very common, and in stores they have a wide range, so there should not be any problems with choosing colors or textures.

To install it you will need:

special metal corners;
door hinges;
moisture-resistant drywall;
various fastening parts;
tile;
wood bars or metal profiles.

Decoration with ceramic products takes place using proven technology. To begin with, he's going to durable frame as the basis for the entire future design. For this, wood or metal is usually used; the latter option is, of course, better. After which the resulting blank is sheathed with plasterboard panels. Apply to this base tiles, which will be the front side of the screen.

Drywall

To install a plasterboard structure, you will need identical materials and equipment as for tiles. This is explained by the similarity of the process, since they are almost identical and are an integral part of each other. The surface of the shower screen itself can be covered with vinyl wallpaper, applied decorative plaster or lay it out with tiles. In any case, the resulting fence will have an attractive appearance.

Textile

One of the most exclusive and rare options is a fabric partition. It's great for non-standard way isolate the basement, however, the practicality of the screen is somewhat lost. This is due, first of all, to increased care for the coating, since the fabric requires a little more attention than other materials. You can cover the panels yourself using improvised means.

For this option, the following types of matter are used:

For a fabric screen, it is best to prepare a metal frame or wood profiles. On the one hand, these decisions look quite strange, however, they have a practical justification. In addition, the fabric can be combined with various finishing materials or used as curtains. In the form of panels, fabric raw materials are rarely used and are used more as an addition.

Acrylic

Bathroom screens made of acrylic are panels of various shapes, types and color shades. They usually come with acrylic products, they just need to be installed correctly and they will last for more than one year. Installation of the frame does not create any difficulties and can be done with your own hands.

MDF

Decorative MDF panels look good as a sliding screen in the shower room. Their installation is carried out by analogy with drywall, however, they differ in that it is necessary to add anti-funge compounds and prime the surface more thoroughly. It is also worth noting that the material must be moisture resistant.

Video instructions

In family life. This is not just a room where hygiene procedures are carried out. For many people, it is a place of rest, relaxation and simply a secluded place where you can be alone. It is unlikely that you will be able to relax in a room where rags for various purposes hang on pipes, and packs of detergents and bottles of household chemicals are placed in the corners.

Therefore, most people strive to make their bathroom as comfortable, beautiful, and clean as possible. Some people are happy with simple painted walls and ceilings, others want to decorate everything with tiles and plastic, while others can afford even natural materials like marble and onyx.

But at the same time, everyone certainly wants to cover the space under the bathtub with some kind of screen (unless, of course, the bathtub itself is an exclusive product decorating the bathroom), since contemplating valves and plumbing siphons is an unattractive activity.

Why do you need a screen under the bathtub?

The screen covering the sides of the bathtub performs several functions:

aesthetic, making the space more beautiful;
functional – allows you to use the bathroom space more efficiently if all items are placed behind the screen household products and tools like a plunger, brushes for cleaning the bathtub and even rags for cleaning the apartment;
sanitary – does not allow water to flow under the bathtub and prevents dust from accumulating under it, which makes cleaning the room easier and makes it more hygienic.

In addition, self-construction of the screen allows you to decorate the bathroom not in a standard way “like everyone else’s”, but individually. For many craftsmen, this serves as a way of self-expression.

According to the installation method, bath screens are divided into:

solid;
swing;

Each type has its own advantages and disadvantages, which are best known in advance.

Solid screen many will find it the most attractive, as it allows the bath to best fit into the interior of the room. It is the fixed screen that allows you to line the bathtub in full accordance with, which gives it a uniform appearance.

The advantages of this method include the following:

a successful solution for the bathroom interior;
ease of care for such a screen - flat surface can be easily cleaned up with a damp cloth or sponge;
The service life of such a screen is practically unlimited.

But there are also some disadvantages:

difficult access to communications located under the bathroom (usually only a small window is left in the screen), which in case of breakdown can lead to the need complete disassembly screen;
there is no way to wash the bathroom floor or check the space for mold;
there is no place to store household chemicals, since it is impossible to get anything due to the static design;
installing a screen is quite a labor-intensive task, especially if you have to cover not only one (long) side of the bathtub, but also the end ones;
must be left under the bathtub small niche for feet, otherwise washing the bathtub will become quite inconvenient.

Hinged screen– used mainly where there is a lot of space to open the doors, as well as in those bathrooms where bathroom furniture sets are used rooms.

In this case, hinged doors make the screen part of this set, allowing you to decorate the room in a single key. But for this, most likely, you will have to make the screen to order, otherwise it will be difficult to achieve complete resemblance to the furniture.

Most often, such screens are made of MDF, similar in color to the shade of the furniture.

The advantages of such structures include:

highly decorative;
possibility to place with inside The doors have quite large shelves for various accessories and household chemicals (and fully opening the doors makes their use as convenient as possible).

can only be used in large bathrooms or with a small amount of equipment;
the need to order a screen greatly increases its cost.

Sliding screens- the most popular. When making it yourself, this type is most often used.

Such a screen consists of two horizontal guides along which two doors move.

A ready-made screen of this type can be bought in a store or ordered if the dimensions of your bathtub are non-standard. Typically, the length of the screen varies from 150 to 180 cm. Its height also changes with the help of sliding legs, which allow you to adjust it to a bathroom of any height.

The frames and doors of such screens (both factory-made and home-made) can be made of various materials. For frames most often used:

– cheap, quite durable, not afraid of moisture and easy to care for material of various colors and textures (the only drawback is that it can burst with a strong impact);
aluminum is stronger than plastic, moisture resistant, can be painted in any color (but the paint can wear off over time from the surface of the profile;
option with a roller mechanism, which allows you to make the frame invisible and facilitates the sliding of the doors (but their price is much higher and it is almost always necessary to order the mechanism individually).

The following materials are used to make doors:

plastic – lightweight material, varied in appearance, is not afraid of moisture, but with an accidental strong impact it can collapse;
MDF - very similar in appearance, there is a wide selection of textures and colors, but moisture resistance is not too high;
Chipboard is inexpensive, can be covered with film, but has low water resistance (the material is quite heavy and is more suitable for swing doors);
plexiglass - a wide variety of textures, moisture resistant and durable, smoothes much better than plastic, but is also fragile under mechanical stress.

Making your own screen

Most often, for self-production, the option with a fixed screen with a technological hole is chosen.

Such a screen can be made in several ways:

lay out of brick;
make a wooden or steel frame and cover it with plasterboard or other board material.

Brick screen – a durable stationary structure that can only be removed by completely disassembling it. Therefore, before installing it, you need to make sure that all pipes, their connections, siphons and valves are in excellent condition and do not require repair for many years.

To build the screen wall, you can use well-fired brick (it does not absorb moisture well) or a partition block:

First, you need to mark a masonry line on the floor in accordance with the size of the brick. More often the wall is made half a brick thick; it can also be placed on an edge, but such a wall will be unstable.
The laying is carried out in the usual manner - with bandaging of the seams. To make the masonry more stable, it is connected to the walls of the bathroom, attaching wires to them at the level of each row.
When laying out the wall, leave a hole in it of the required size for the communications under the bathroom.
Since the bathtub expands upward, bricks can be laid on edge in the upper rows.
After the masonry has dried, it is tiled or tiled.

Never use masonry as a support for the edge of the bathtub. To prevent this from happening, a gap of about 1 cm high is left between the top row of bricks and the bathtub, which is then foamed.

This is the simplest and cheapest type of screen to make yourself.

To make it, you need to build a frame, which is then sheathed with sheets of plasterboard. The frame can be made of either wood or metal profiles. When using wooden frame, it must be painted or treated with special products to reduce the likelihood of rotting and mold.

For a wooden frame you will need:

bars measuring 40*40 mm;
screws;
metal corners.

The operating procedure is as follows:

Measurements are taken at the location of the screen and marking of the places where the bars are attached. It should be taken into account that the screen frame should be slightly recessed under the bathtub, taking into account the thickness of the finishing layer (). If you plan to finish the gypsum board with tiles, then you need to add an additional thickness of the tiles and the adhesive layer.
The frame bars are prepared according to the measurements: 2 horizontal and vertical bars in the required quantity. If the bathtub is short, then 2 vertical bars along the edges of the frame will be enough. If the bathtub is long, then it is better to add a couple more vertical bars at a distance of 50 - 60 cm from each other for structural rigidity.
You need to drill holes in the outer side bars to attach the screen to the walls.
Then the frame is connected with screws and corners.
The frame is attached to the walls.
If necessary, the lower beam of the frame can be secured to the floor.

To make the screen you will need:

moisture-resistant plasterboard;
hinged hinges for hanging the inspection hatch door;
metal latch.

Operating procedure:

A sheet of drywall is marked so that it covers the entire frame.
The intended panel is cut out using a construction knife.
A hatch hole is cut out in the panel and the door is hung and secured with a latch.
The screen panel is attached to the frame using screws.
Check the stability of the screen and, if necessary, make additional fastenings.

The last stage is finishing the screen surface with the selected finishing material: film, tiles, mosaic.

When using a metal profile as a frame, the procedure is the same, only the drywall is fastened not with screws, but with self-tapping screws.

To make your own screens, you can use not only the materials listed above, but also many others:

Wood - you just need to choose wood that is not afraid of dampness. Such a screen can be made in the form wooden blinds- that is, with gaps that will facilitate ventilation of the wood and the space under the bathroom.
Plastic lining - mounted vertically on the frame so that water does not linger in the seams. You can also make a screen with narrow apertures.
Fabric – for such screens, quick-drying fabrics that are easy to care for are selected: polyester, nylon, membrane “breathable” fabrics. Such screens are obtained by upholstering or covering the frame with the selected material.
A ready-made inspection hatch of a suitable color can be used as an inspection door.

Sometimes screens are made whose walls are tilted outward using special fittings. On the inner surface of such screens there are narrow but long baskets for storing cleaning products, sponges and other accessories needed in the bathroom.

Often they come with a ready-made screen made of the same material. All components are supplied together with screen shields.

It is more difficult to make a screen for a corner or curved bathtub. Here would be better suited bent metal profile covered with plastic.

If you don’t want to equip your bathroom with a boring purchased screen, then you can always make an inexpensive and beautiful homemade one. True, you will have to spend time and make efforts, but the product will be unique, and your bathroom will be exclusive.

Which will perform several functions at once. The easiest way is to buy a ready-made screen. However, if you strive for individuality, then it is worth considering options on how to make a screen under the bath with your own hands. In this case, you will be able to design the bathtub based on your needs, and not templates.

The screen under the bathtub is a special safety fence, behind which you can hide detergents and other important supplies. Behind it you can successfully disguise communications such as sewerage, water supply and heating pipes. That is, such a structure carries an aesthetic load.

Let's look at its positive aspects:

Functionality. You can hide equipment, cosmetics, household chemicals and more from prying eyes.
Practicality. Although plumbing and sewer pipes hidden, easy access to them, as there are inspection windows.
Aesthetics. When decorating the interior of a bathroom, the screen under the bathtub will hide everything that spoils the appearance.
Easy to install. If you buy a ready-made screen, it is very easy to assemble. It is also quite possible to make a screen yourself.
Economical. Often, you can make a screen for a bathtub from leftover building materials. In this case, you won’t need to buy anything at all, except perhaps individual elements.
Safety. If you have small children, it is important that household chemicals are hidden.

So, we can distinguish 3 main functions that the bathroom screen performs:

Protective.
Decorative.
Utilitarian.

Fortunately, today you can use a variety of building materials to make bath screens. For example it could be:

plastic;
drywall;
brick;
ceramic tiles and more.

In addition, screens may have different types, namely solid, with one door or with a special niche for feet and a sliding screen. Thanks to this choice, you can really make the lining of the bathtub beautiful and unusual.

Now let's look at a few original ideas How to make your own screen for a bathtub.

Due to the presence of a special coating, MDF panels are excellent material for finishing work in the bathroom. They have a fairly high resistance to moisture. The structure of the panels is dense, and the boards themselves are impregnated with high quality special composition which prevents the formation of mold and mildew. It is also worth noting that there is a wide variety of textures and colors of coatings.

As for making a screen for a bathtub, the assembly principle is based on kitchen furniture. So, the manufacturing process is as follows:

It is necessary to mount a frame from wooden blocks. To do this, secure the timber to the wall and floor using dowels.
The bars are connected to each other by corners.
Be sure to take into account the availability of access to plumbing units for their maintenance. Perhaps some part of the frame will be accessible for opening. To do this, you can install guides along which the doors will open.
The finished frame is covered with MDF boards. They must first be cut to size.

Design the frame itself so that when installing the MDF panels, they do not protrude beyond the bathtub. Otherwise, the finish will look ugly. Plus, splashes of water hitting the end of the panel will gradually destroy it. In this case, even no impregnation will help.

If you are a supporter of a permanent structure, then the bath screen can be made of brick. However, in this case further cladding will be required. First, install the bathtub in its “rightful” place. Then, under the bathtub along the perimeter, mark the location of the first row. In most cases, half-brick masonry is sufficient. Before starting masonry, you should immediately decide what material will cover the surface of the laid wall. If it is tile, then the laying should not be done flush with the edge of the bathtub, but should be slightly deeper - exactly the thickness of the tile and glue.

In the place where the siphon will be installed, it is necessary to build a small window. Later it can be covered with doors. You can buy them ready-made or make them yourself by attaching them to awnings. When laying bricks, you should not lay the bathtub at the very top. You should leave a gap of up to 2 cm between the last row of bricks and the bathtub itself. Then this seam is filled with polyurethane foam.

When the wall masonry is ready and the mortar has dried, you can begin finishing works. Alternatively, you can tile it with ceramic tiles. After laying it, the seams are rubbed with grout. The result is a durable and beautiful bath screen.

In terms of screen formation, drywall is the most suitable material. You can make a structure of any shape from it. Screen production begins with installation metal frame. Although you can use a wooden block for the frame, given the high humidity of this room, it is better to use a metal profile.

When installing the frame, keep in mind that a layer of plasterboard will be fixed on top, as well as facing material, this could be tiles. Therefore, when installing the profile, be sure to take this thickness into account. Accordingly, the profile should be fixed with a slight recess from the edge of the bathtub.

This is quite easy to do. Mark a line from the edge of the bathtub rim on the floor. You can measure it with a level or plumb line. You can also mark this line along the wall to which the bath screen will adjoin. Having drawn a line along the entire bathtub, step back from it by the thickness of the drywall, glue and tiles. On average, this distance can be equal to 23.5 mm.

Afterwards the UD profile is fixed along the marked line. The profile is first coated with sealant. This will completely prevent moisture from penetrating under the bath. Now it's time to install the CD profile in increments of up to 600 mm. Where it is planned to manufacture a window, additional profiles are installed to secure the door. When the frame is completely ready, it should be covered with moisture-resistant plasterboard.

When choosing screws, be sure to consider their length. If they are too long, there is a risk that the screw will screw into the acrylic bathtub.

Once all the drywall is screwed in, it should be covered. The ideal option for this is ceramic tiles.

Schemes

In these diagrams you can see the sequence of making a screen for a plasterboard bathtub:

If your bathtub has a non-standard rectangular shape, then the screen can be made into a corner. You can also use drywall for this. The frame is made of metal profile. Cuts are made on it, and then it is given any shape. In this case, you should make 2 similar profiles. To strengthen the frame, vertical profiles must be installed. The frame is also installed with a small recess from the edge of the bathtub side. This will allow you to install the facing material (tiles) on the same level as the bathtub.

As for the drywall itself, when screwing it in, it is important to carefully give it a curved shape. There are two options on how to do this. The first is to make cuts at equal intervals on the drywall and carefully bend it. Also top layer cardboard can be wetted and placed at a slight angle to the wall. Gradually, under its mass, it will acquire the desired shape.

The first option is more practical if the bending angle is too large.

This type of screen also has its own distinctive features. For example, ready-made sliding products are available for sale today. However, not in all cases they fit the size of the one already purchased and installed bath. Moreover, acrylic bathtubs often come complete with acrylic screens that are suitable exclusively for specific model baths. But in this case the screen turns out dull. Such products are not made as sliding ones. Therefore, we invite you to consider the option of manufacturing a sliding screen based on a ready-made design.

To do this, you need to have a guide along which the door will move. You will also need to cut the panel into two parts. One of them can be stationary, and the second movable. However, both parts can be movable. In this case, the guide must have two lines for moving the doors. In this way, a frame is made on which the guide should be secured under the side of the bathtub and on the floor. A guide is attached to it and the doors are installed. Handles must be attached to the door so that the door can be moved. In this case, you can make a sliding plastic screen.

To give the bath an original look, you can build a mirror screen. Its making is similar to the manufacturing process plastic screen. To move the sash, plastic or metal guides are used. They have small rollers, thanks to which the mirror screen will move smoothly.

The material is attached using special clamps for glass. Pay attention to the quality of fastening. It must be reliable. Additionally, the mirror can be glued to liquid nails. In this case, it will not disappear.

It is not recommended to use double-sided tape. The bathroom has high humidity and often high temperature. This can have a negative impact on the tape, which will simply stop performing its main functions and the mirror will fall off.

This type of screen has its significant disadvantages. For example, there will always be droplets of water on the surface of the mirror, which form stains after drying. Therefore, after each bath, the mirror screen must be wiped.

Fabric materials can be used as a screen, for example, it can be artificial leather, waterproof nylon material, fabric with a membrane structure, polyester material, etc.

How to secure such a screen? It's quite simple. Using special glue, glue one side of the Velcro to the inside of the bathtub rim. If necessary, the edges of the curtain (screen) and the bottom must be hemmed using a sewing machine. The other side of the Velcro is sewn to the top edge of the curtain. The curtain is then attached to the tub with Velcro. This is a cheap option for a bathtub screen, which is very important if you are on a limited budget.

If you don’t want to make a screen yourself, but decide to buy one, then pay attention to some nuances of the right choice:

If the bathroom is spacious, then almost any screen can be suitable.
Provided that the bath room is small, for example, as in Khrushchev, the choice is limited. In this case, a sliding door or a removable and monolithic one would be better suited. As for the monolithic one, it is ideal for a narrow bathtub.
Sliding screen models are much more convenient when they are immediately equipped with shelves. In this case, it is possible to hide all the necessary bath accessories, household chemicals, etc.
If you have acrylic bathtub, then in most cases the screens are included. If not, then immediately pick it up in the store so that it is completely suitable.
Pay attention to the quality of the handles. They must be made of a material that does not rust.
If the selected screen has legs in its design, then they must be adjustable. Otherwise, it will be difficult to adjust it to the individual characteristics of the bathtub, especially when the floor is not completely level.
It is best when the fittings are made of metal. Plastic ones can break quickly.

So, from this article we learned how to make a screen for a bathtub with your own efforts. We saw different options for arranging this important element. If you bought a ready-made screen, then we also looked at how to install it correctly. In addition to this article, you will be able to watch videos that clearly demonstrate some of the technologies. If you have your own experience or know of other possible arrangements for the space under the bathroom, then write about your experience and ideas at the end of this article.