The sofa often becomes the centerpiece of a patio, living room or dining room. And it’s not at all necessary to shell out a tidy sum for this piece of furniture - it’s stylish and comfortable sofa You can do it yourself, even without any special skills. This review contains sofa ideas that will tell you how to turn things that sometimes seem like outright trash into a cozy sofa.

1. Spring bed

old metal bed can easily be turned into an original boho style sofa. All that is needed to realize this idea: new mattresses, upholstered with bright fabric and paint to update the details of the bed.

2. Baby cot

A crib that can no longer be used for its intended purpose can be turned into a small but cozy sofa. Just get rid of the front side, cover the mattress with bright fabric and add a few sofa cushions.

3. Bath

Old cast iron bathtubs can be used to create original sofas that are suitable for decorating your home and garden. Of course, such work is very labor-intensive; you will need tools and certain skills, but in the end you will receive a unique piece of furniture.

4. Pallets

A charming low sofa with two drawers at the bottom, to create which you will need three wooden pallets and soft furniture pads.

5. Wooden beam

A simple and at the same time elegant sofa, made of rough wooden blocks and laconic light pillows, made to order, will fit perfectly into the interior of a modern living room or into the landscape of a country house.

6. Furniture panels

A stylish and laconic sofa, which you can make yourself from furniture panels and large sofa cushions, will become a real highlight of the living room, regardless of its design style.

7. Boards

People who are no strangers to handicrafts can make a sofa from ordinary wooden planks and furniture pillows. This piece of furniture is perfect for arranging a summer patio or living room in a private home.

Video bonus:

8. Boat

Creative small sofa made from the bow of a dilapidated wooden boat, will become a spectacular interior detail and bring romantic sea notes to the room.

9. Pallets

A low corner sofa with shelves for books, which you can make yourself from wooden pallets and large furniture pillows, will fit perfectly into the interior of an apartment decorated in Scandinavian, rustic or loft style.

10. Plywood and wood

An original, comfortable and ergonomic chair with shelves for books around the perimeter, which can be made from plywood and wooden boards.

11. OSB boards

A simple sofa that you can make yourself from OSB boards and a thin mattress, will fit perfectly into the interior of the hallway.

12. Wooden boxes

Charming and very original armchairs, which can be made from wooden boards and soft furniture overlays, will become a creative detail in an introvert’s interior.

13. Cinder blocks

A bright, unusual sofa with space for shoes below, which is easy to make with your own hands. To do this, you will need cinder blocks, which should be stacked on top of each other to form a frame, a bright mattress upholstered in a pleasant fabric and several sofa cushions.

14. Suitcase

Video bonus:

17. Natural wood

Stunning sofa from natural wood with a backrest shelf that can serve as a workplace or dining table, will become a stylish and functional detail of a small living room.

Especially for those who are seriously concerned about their own balcony, we have collected.

Agree, each of you has at least once thought about how to make a folding one. After all, perhaps, there is not a single apartment or house in which there is no soft sofa. When you come home, especially after work, you really want to either sit or lie down on your cozy sofa. Only fashion changes every time, and with it furniture design. And you can create an original folding sofa with your own hands.

You can make a comfortable and original folding sofa with your own hands, given free time and the necessary materials.

Production and purchase of materials

This will take up your free time, but will also bring benefits. Firstly, you will save money on this sofa, since today the cost of store-bought copies is quite high. Secondly, you will select quality consumables and you will be confident in them. Thirdly, you can change at any time appearance sofa, changing the upholstery. Fourthly, you will save space in your apartment, since the product will be assembled during the day, and in the evening it can turn into sleeping place. And most importantly, you will feel proud of your work and show it off to your family and friends.

Before you start making a folding sofa with your own hands, you must decide on the size and type of product. There are three main types: book sofa, roll-out sofa, folding sofa. And also don’t forget to draw a drawing of it. You will need it not only during the work process, but also in order to correctly calculate the consumption of the necessary material. Having decided on all this, you can proceed to the next step.

To, namely, a folding sofa, you need to purchase the following materials:

• boards (5 cm thick and 15 cm high);
• corners;
• bars;
• springs;
• fabric for covering;
• thick foam;
• transparent varnish;
• hinges for doors;
• furniture panels;
• jigsaw

Having bought everything, you can start working on the sofa itself. The instructions will help you with this.

Return to contents

Making a folding sofa

The back of the sofa is made from furniture board.

Let's start working on the back of the sofa. It is made from furniture board. Mark the top curly line on it a little earlier. To do this, take a template. Next you must drill a diamond-shaped slot and the top line of the back according to the drawing. You will need a jigsaw for this. To get a diamond-shaped opening, you need to cut holes for the jigsaw in advance. Then drill slots near the obtuse corners of the diamond. Do not turn the jigsaw in sharp corners.

After completing this work, remove the sawdust from the edges. After cutting out the remaining parts of the furniture panel, all elements need to be sanded. Be sure to carefully reinforce them by pressing them against the board of the workbench. Using a profile router, you must round off the front parts of the sofa parts. If you wish, varnish the finished elements.

Then attach the main block of wood to the wall. You determine the size and height according to your preferences. The height you determine will be equal to the height of the side parts of the seats. Attach the beam in the middle horizontally, fix it at the edges with screws. Place a wooden strip on it, on top of which fasten the seats on hinges, thanks to which the sofa will fold out. Next, this rail should be attached at the bottom to the block with self-tapping screws. The holes for them are made initially.

The sofa unfolds and folds thanks to special hinges.

After this, you must mark the locations of the hinges for the side seats, they will fold inward. Holes for dowels are drilled according to the mark, and the hinges are fixed with screws. When the hinges are installed, the sides are attached to them. Now install the back of the sofa using double-sided self-adhesive tape. You can add foam rubber to the back in a case. It looks both beautiful and comfortable. The homemade sofa is ready. The only downside is that there is no additional linen drawer.

Return to contents

The principle of making a sofa book

There is another way. But first, get everything you need:

• boards;
• bars;
• slats;
• bolts;
• transformation mechanism;
• interlining;
• foam rubber, synthetic winterizer;
• sofa covers (you can sew them yourself);
• wooden fittings (for armrests);
• sandpaper.

Most folding sofas are equipped with a linen drawer.

Get started by assembling your laundry drawer. Make a box with dimensions of 190x80 cm. To make the structure stronger, attach two transverse slats in the middle. Make the bottom of the box from a sheet of fiberboard. The seat and back will consist of two identical boxes made of bars (40x60). Nail the slats on them so that they hold the mattress.

Make the armrests from chipboard (24 mm). They need to make frames. Drill holes at the bottom for the bolts. In the linen drawer you also make 2 holes on both sides. Attach the transformation mechanism on both sides so that there is a gap between the backrest and seat frames. free space 10 mm. Make sure that the seat does not extend beyond the armrests when the product is folded.

All roughness on the frames can be treated with sandpaper. Attach non-woven fabric and thick foam rubber to the slats. You don’t cover the transformation mechanism with it. You can cover the foam rubber on top with synthetic padding so that it does not wear out. Place sewn covers on the seat and backrest.

Glue foam rubber, twisted in the shape of a roller, onto the armrests, and you will need to attach more of it on top to thicken and soften the armrests. Cover the armrests with the same fabric from which you sewed the covers for the sofa itself. Attach the fittings to the front side. Don't forget to check whether the transformation mechanism works by unfolding and folding the sofa book. Well, the sofa with your own hands is ready. Here the operating principle of the sofa is simple and reliable. But there is also a minus: such a sofa cannot be placed close to the wall, since when unfolded it will constantly rub against the wall.

The home sofa plays an important role in the life of every man. There is no need to be ironic about this. Many creative plans and ways to implement them were conceived on this piece of home furnishings.

You can buy a good sofa in a store, today this is not a problem. But is it real? home handyman miss the chance to try your hand at making upholstered furniture?

Financial incentive is another powerful argument in favor of the “couch project”. If you calculate the cost of the materials needed for the work and compare it with the price tags furniture showrooms, then the savings will be very impressive.

In our article we will look at the implemented options for homemade sofas and give brief description their manufacture. In addition, the topic will be covered self-assembly corner sofa, from drawing to finishing cladding.

So many sofas, beautiful and different...

Having decided to make a sofa with your own hands, it will not be superfluous to take a closer look at ready-made examples of home “sofa” creativity.

Let us note the main features of this type of furniture so as not to confuse it with regular bed. The main distinguishing feature of the sofa is not the soft bed, but the backrest on which you can lean. The bed does not have this element. Side railings with armrests - another one classic element sofa design.

IN modern models Armrests are often abandoned, leaving only the backrest. In some designs, it can be swiveled and turned into a mattress.

Photo No. 2 Sofa with swivel back

This system is called the “Eurobook”. The principle of its operation, as can be seen in photo No. 2, is very simple: a block with a seat on wheels moves forward, and the backrest, with a slight movement of the hands, rotates on hinges and turns into an additional sleeping place. Anyone who decides to make a sofa at home can take note of this option.

It’s not for nothing that they attract the attention of home furniture makers. These are ready-made durable modules. Of these you can minimal costs money and time to build an original bed. A sofa made of pallets, made in a deliberately rough fashionable loft style, looks great with a dump truck wheel serving as a coffee table.

All you need to assemble such a structure is a screwdriver and a jigsaw. Having secured the base pallets with screws in pairs, the sidewalls are attached to them. They are made from the same pallets, cut at the level of the “bobs” - thick wooden inserts. This sofa has no back. It is replaced by two wide pillows leaning against the wall. Two thick foam mattresses give a pleasant “softness” to the entire structure.

When planning to make a simple sofa, try to enlist the help of your spouse. Her sewing machine will save you from the need to go to a workshop to sew covers. If your wife does not share your grandiose plans, then buy construction stapler. With its help, you can carefully and quickly complete the upholstery of the frame.

Some people like wood, while others cannot live without metal, making everything they need from it, including a sofa. If yours is old cast iron bath has not yet been scrapped, then use in an original way turning it into a comfortable bed. Better material You won't find anything better than enameled cast iron for a garden patio.

Such an outdoor sofa is not afraid of either snow or rain, regularly bringing its owner respect from guests and neighbors.

Model designers make not only models vintage ships, tanks and planes. Furniture items often fall into their sphere of attention (photo No. 6).

Why don't we make such a sofa, increasing its miniature layout to the right size? The idea of ​​this design is simple and rational: the base is made of profile pipe, to which thick plywood or OSB board is attached.

After practicing assembly techniques on a smaller copy, it will be easier for you to work with a full-size sofa.

If you don’t have an old tire on your household, it’s not easy to make an original round sofa. If rubber “shoes” of the tractor are available, you can cover them with fabric and attach them high back. A stand with legs and soft foam cushions will give the structure an ideal appearance.

How to make a corner sofa yourself?

You cannot begin this work without a detailed assembly diagram. A corner sofa consists of several parts, the manufacture and joining of which require precision. The best fastening material for a beginner is self-tapping screws. Tenon joints frame - the level of an experienced carpenter.

So, to assemble a corner sofa you will need following materials:

• wooden block (section 30x50 mm);
• board (25x80 mm);
• plywood or chipboard (thickness 12 mm);
• plywood (thickness 5 mm);
• foam rubber 10 cm thick;
• thin foam rubber or batting (for making a lining for the casing);
• PVA glue for attaching the soft lining;
• furniture upholstery fabric.

To work you will need the following set of tools:

• screwdriver;
• jigsaw and hacksaw with miter box;
• construction knife for cutting foam rubber;
• scissors for cutting furniture fabric;
• stapler;
• self-tapping screws;
• sewing machine.

Before making a corner sofa yourself, you need to clearly define its layout diagram and once again look at all the prepared drawings.

The base of each corner sofa block is a frame made of plywood or chipboard, mounted on a timber frame. If the thickness of the slab is large enough (from 16 mm), you can do without a block. In this case, screws are screwed directly into the ends of the plates, drilling guide holes in them small diameter to prevent the material from splitting.

For rational use internal space in blocks No. 1 and No. 2 you can make removable covers. To support them from the inside along the contour of the frame, you need to secure a block with a cross-section of 2x3 cm, lowering it below the upper cut of the slabs to the thickness of the lid (12 mm). In order for the lid to be easily lifted, two holes are drilled in it for the fingers.

In terms of design, blocks No. 1 and No. 2 are the same, but we will make block No. 3 with a drawer-seat that increases usable area sofa This is the simplest option that does not require the installation of transformation mechanisms (retractable or rotary). Their correct installation and adjustment for beginners is a complex process.

Our drawer will have a lid made of chipboard or thick plywood. Assembling it is not difficult, but making comfortable folding legs is a problem. They will interfere when sliding the drawer into the sofa body. Instead, we will increase the height of the drawer face plate. It will play the role of a support platform when unfolding the sofa.

For easy pull-out from the reverse side front panel The drawer can be secured with two wheels from office chairs. The wheel body will not rest against the bottom of the sofa if a small cutout is made in it in advance.

The lid on block No. 3 can be made removable to put bed linen there.

The dimensions of the seat cushion must be equal to the dimensions of the platform drawer. Having pulled out the drawer of our corner sofa, we remove the back cushion and place it in place of the mattress.

Next is our step by step instructions contains a description of the backrest assembly. For all corner sofa blocks, their design is the same: vertical posts connect three boards. The two lower ones serve to secure the backrest to the sofa, and the upper one provides rigidity and serves as the basis for attaching the upholstery.

Having assembled the back frame, the front and back need to be sheathed with plywood 5 mm thick. All sharp corners processed with sandpaper to avoid snags and unevenness during installation upholstery fabric. For all facial and side surfaces you need to glue batting or thin foam rubber to make the upholstery softer and more voluminous.

The last stage of production is covering the sofa with fabric. It can be purchased at specialty store, having made a preliminary calculation of the sheathing area and not forgetting about the 5-10% margin required for cutting and turning on the frame.

To do this, all the front parts of the body and back need to be measured and pieces of material cut out according to the resulting dimensions. They are attached using a stapler to the invisible ends of the panels. To prevent the fabric from wrinkling at the corners, make cuts in it and pull it tightly before shooting the staples.

Cushions for the back and seat of a corner sofa are best made from foam rubber with a thickness of at least 10 cm. Optimal design covers for them - a removable zipper with a lock. When dirty, the covers can be easily removed and washed. If you do not have experience in sewing, then draw a simple sketch of a pillow and order the sewing of covers in the studio.

The easiest way to make a sofa is the frame of which consists of several transverse and guide bars.

If you feel sorry for paying exorbitant amounts of money for a ready-made sofa in a store, then try making it yourself.

It is quite simple to make such a design; you only need a minimal set of tools and materials.

How to make a simple sofa with your own hands?

You will need to develop a drawing, make an accurate calculation of the quantity necessary materials, purchase tools and assemble the structure. You will need the following tools:

• square;
• electric drill;
• hammer;
• electric jigsaw;
• construction stapler.

Materials you will need to purchase:

• metal corners;
• beam;
• stain or colored glaze;
• foam;
• zippers and Velcro;
• durable cord.

For a city apartment, a sofa of this design will look rough, but it is ideal for country house or dachas. There are several reasons why you should make a sofa:

1. It will be possible to significantly reduce the cost of funds. Such a design will cost many times less than a product purchased at a furniture store. However, it should be remembered that savings should not come at the expense of quality.
2. Possibility of obtaining a high-quality design.
3. Possibility to choose the accessories you like.
4. You can get a design of the required dimensions.
5. In the future it is possible by reducing cash costs.

A similar design consists of a back, front panel, seats and armrests. The base will be attached to the finished frame.

Return to contents

Sequence of actions for making a sofa

First of all, you need to prepare bars of suitable sizes. It is not recommended to make a structure from pine, since such wood is not able to withstand deformation and must be additionally processed.

After this, you need to make accurate measurements. You need to mark the elements and make grooves, then drill holes for the stopper on the frame so that you can install mounting screws in the bottom horizontal rail frame, excluding cracking of the stopper.

In the process of preparing materials, you need to pay attention to the pattern of the tree. The connections must be made so that the growth rings are positioned with their convex sides facing each other.

After assembly, all elements must be thoroughly sanded. After this, the base is treated with colored glaze or stain.

It is worth noting that the dimensions finished design will be set by the parameters of the sofa base.

In order to make the support legs, you should use a beam of strong rock with a cross-section of 7x7 cm and a height of less than 10 cm. To ensure a reliable connection, you need to fasten the beam to metal corners.

The backrest can be made with a slope. The skeleton should consist of 2 horizontal and 4 vertical boards. The height of the backrest should be selected based on the user’s height and personal preferences. The plywood must be completely applied to the back of the skeleton. On the side on which the backrest rests, plywood should be applied exclusively to the open part. The lower part can be covered with a seat. Study the drawing of the backrest with all dimensions can be seen.

Return to contents

Manufacturing of soft seats

Seats can be made from foam rubber with a density of more than 35 kg/m³. It should be laid in several layers. The base is covered with a protective fabric, which will minimize friction between the decorative coating and the frame of the sofa. This way it will be possible to prevent the formation of folds.

The back cover is made of thinner foam rubber, so the load on the back is much less than the load on the base of the sofa. In order to sew decorative coating, a strong cord should be used. There should be zippers or Velcro along the back edges of the bottom of the structure. Upper part The seats are fixed with Velcro.

Return to contents

How to make a roll-out sofa with your own hands?

There are designs that can be used not only as a sofa, but also as a bed. Such designs include roll-out sofas.

One of the most common types of sofas is the roll-out design. IN in this case the berth extends from the bottom of the structure. To pull out such an element, you will need to pull a special handle or loop. Pillows are placed on the roll-out part of the sofa. When folded, such pillows can be used as a backrest. There is another type of roll-out design: the backrest in it consists not of several pillows, but of a single piece. soft base. When the sofa unfolds, the backrest and seats are installed on the retractable part.

To the benefits roll-out sofa The following properties can be attributed:

1. The retractable part of the structure is large, so it can accommodate even several people.
2. Small dimensions of the structure when folded.

The disadvantage is that in the unfolded position the structure takes up large number places. Therefore, it is not recommended to install it in small spaces.

Making a roll-out sofa with your own hands is not difficult if you have minimal skills. You will need the following items:

• a small number of boards 5 cm thick and 10 cm high or more;
• beam;
• backrests;
• seats;
• frame covering material;
• dense foam rubber;
• door hinges.

To construct the structure, pine panels will be used, which will need to be further processed. After everything is prepared necessary tools and materials, you can start working.

Return to contents

Procedure for making a roll-out sofa

In this case, a structure will be made with sleeping space dimensions of 1140x1980 mm. Consider the drawing of the sofa.

To manufacture the structure, you must perform the following steps:

1. The back will be made from a furniture panel, on which the upper edge is marked using a pattern.
2. According to the markings, a diamond-shaped gap and the upper edge of the back are cut out. This can be done by using a jigsaw. Before making a diamond-shaped opening, you need to drill holes in the shield for the tool saw. You also need to make 2 holes near the non-sharp corners of the figure. In sharp corners there is no need to turn the saw of the tool. After cutting from the edges is completed, traces of cuts must be removed.
3. After all other elements from the shield have been cut, they must be sanded well. In the process of performing this operation, it is necessary to securely record each element that needs processing. To do this, the untreated surface must be fixed to a bench board.
4. Using a router, you will need to process the edges of all workpieces, for which you should use the appropriate profile cutter. If desired, the finished components can be additionally tinted. The color of the impregnation is selected based on the design of the room in which the structure is installed. At the end, the elements will need to be coated with wear-resistant colorless varnish.
5. After this, the support rail should be secured to the wall. The dimensions of the roll-out sofa and the mounting height should be determined based on the ease of use of the structure. After determining the overall height, you need to select the height of the side supports of the folding seats. First of all, the rail is fixed in the middle so that in the future you can set it horizontally.
6. The rail is mounted according to the level. This element must be slowly rotated around the mounting screw. After this, the rail is fixed at the edges.
7. Another beam should be placed on the support rail; the folding seats are attached to the hinges. After this, the beam is fixed with self-tapping screws to the bottom of the structure. All holes for self-tapping screws must first be made in the rail.

The sofa is the heart of the home. It serves as an element of interior decor and helps to relax after a hard day at work. A sofa is not just a piece of furniture. He will certainly become business card home and the center of attention for your guests.

In this article you will learn how to make a sofa with your own hands that is no worse, and perhaps better, than those sold in furniture stores. You will see what elements the sofa consists of and what materials are most often used in the process of its manufacture.

Don't forget that homemade furniture saves the lion's share family budget. If you decide, for example, to make a sofa yourself, its cost will be two or even five times lower than the market price!

However, this depends on the materials chosen and the specific design taken. Sofa bed will cost more, but if this is your first product, opt for the project described in this article - it’s great suitable for those who set out to learn how to make upholstered furniture.

Make a sofa with your own hands, and you will see from your own example that there is nothing complicated about it!

So let's get started.

To work you will need the following materials and tools:

1. Tools:
- jigsaw. If you don’t have a jigsaw, it doesn’t matter: use a hacksaw, especially since it will also be useful to you in the process of sawing bars;
- pneumatic furniture stapler. If you intend to make only one product, use mechanical stapler– it will cost less;
- screwdriver;
- a grinder or plane for grinding down sharp corners of the frame;
- staple remover or sharp screwdriver;
- sharp knife for cutting foam rubber;
- scissors;
- a sewing machine for sewing together sofa upholstery elements;
- roulette.

2. Materials:
- bars with a cross section of 40-50 mm;
- plywood or any other affordable, durable and, if possible, lightweight sheet material;
- furniture foam rubber, 50 mm thick. You can purchase foam rubber, like many other materials, in a specialized online store “everything for furniture”;
- padding polyester or batting for additional softness of the frame and the product as a whole;
- furniture fabric;
- wood glue;
- strong thread for sewing upholstery parts;
- screws or furniture screws(if using the latter, you will need an electric drill);
- marker or pencil.

Let's get to work.

1. Frame
The basis of our sofa is the frame. It can be of any shape and size, but this article describes the simplest project, which can be made by a person inexperienced in the production of upholstered furniture.

The basis of the frame is wooden blocks and slats with a cross section of 40-50 mm or any other size that ensures the strength of the finished product.

Additional rigidity is given to the frame by the sheet materials with which it is sheathed - plywood, OSB, chipboard, fiberboard, etc. The inside of the frame is hollow, which makes it relatively light.

At home, the sofa frame is assembled using a screwdriver and self-tapping screws. The holes for the screws can be pre-drilled with a drill, and the screws themselves can be lubricated with wood glue when drilling.

Glue is also often used at the joint wooden parts, before they are connected using self-tapping screws. In this case, they are pressed against each other with clamps for a while.

In addition, when assembling the frame, it is convenient to use all kinds of angular and curved metal fasteners.

The length of our sofa will be 3 meters. It is quite roomy and consists of two equal parts - 1.5 m each. In the photo below you see one of them - left side sofa

2. Frame and mattress
The frame of the future mattress - the base of our sofa - is made of boards. For greater comfort, there is a binding made of furniture straps.

It is not difficult to do: first, the belts are fixed horizontally with a stapler, then the binding should be done and the belts are fixed perpendicularly - vertically.

The photo shows what we should get in the end. These are the two components of the mattress.

3. Back
The photo below shows the frame of the back of our sofa, covered with plywood. Please note that the frame itself is made of wooden blocks, and metal connectors are used to fasten the parts.

The back is hollow and light, making it easy to work with. The shape in this case is as simple as possible - rectangular in profile. Without much effort, you can make it sloping by increasing the width at the base and decreasing the width of the frame at the top.

4. Side parts
By analogy with the back, we also make the side parts of the frame. It should be noted that the protruding bars that are visible in the photo will serve as a base for foam rubber in the future. But more on that later.

5. Pasting with foam mats
After assembling the frame, we proceed to installing the foam rubber.

We paste over the top and front part of the backrest with pieces of foam rubber of the required size and shape, as well as internal surfaces side elements. We lay the foam rubber on the mattress on top of the binding.

The glue can be applied with a wide brush or used in aerosol form. Immediately after applying the layer of glue, press the foam rubber to the surface and leave for some time (usually no more than half an hour) until it sets.

6. Sintepon (batting)
In order to hide unevenness, smooth out sharp transitions and add volume, the back, sides and, if desired, the mattress are wrapped with padding polyester or batting.

Before proceeding to this stage, it is necessary to sand all the sharp corners of the frame so that the upholstery does not wear out and lasts as long as possible. This operation is carried out using a grinder, plane or simply coarse sandpaper.

7. Fabric upholstery.
Covers are usually sewn using ready-made patterns and templates. If there are none, you can make them yourself by applying and trying on the fabric to each of the elements of the sofa, be it the back or the pillow. Some of them can have zippers sewn into them for easy cleaning and washing.

The covers can be cut strictly according to the shape or gathered together and secured with a stapler in those places where the design allows.

As a last resort, sewing covers can be entrusted to specialists from the studio. Their design is very simple and inexpensive.