Old boards in the interior are not only a tribute to modern fashion, but a great opportunity to make your home unique, with a unique character and distinct individuality.

Cracks, knots, passages eaten away by insects, peeling paint, worn texture, traces of salt or grapes, warehouse stamps - all this has its past. What were these boards before: someone's or the wall of a barn; on board a fishing boat or used for transporting goods across the ocean; Or maybe they were used to make a stage on which a famous rock band performed half a century ago?

Agree, it is pleasant and fascinating, sitting in your room, to reflect on the history of a time-worn tree, which in modern times continues to give home comfort and shapes the character of the entire home. And there’s no need to even talk about the possibility of realizing the most daring design ideas.

Old boards will come in handy in the most different interiors: sophisticated, romantic, daring and many others, where individuality and non-standard design solutions are valued.

Trend or tradition?

Using old boards for... restaurants or showrooms are considered by many to be a tribute to modern fashion, another trend that couldn’t come at a better time at a time when everything exclusive, unusual, and non-standard is valued. But this opinion is only partly true.

Each person at all times tried to make his home individual, not like everyone else, experimented with styles, furnishings and decor. And of course, from time immemorial, people have used wood to decorate their houses, which added warmth, coziness, and created an atmosphere of comfort and harmony with the outside world. The new houses smelled of wood and fresh resin, but they lacked a lived-in atmosphere, family traditions and touching memories.

Only over the years did the boards absorb the spirit of the family, the change of generations, smells, memorable cracks and marks appeared on them, layers of paint changed, forming the so-called patina of time.

New generations, returning to the house of their ancestors, recalled their childhood with nostalgia, looked at photographs of grandparents, young parents, immersed in an atmosphere of domestic serenity, accompanied by the slight creaking of old floorboards. And it became so sad when old house was being demolished, the fence on which things were dried was dismantled, and the boards were burned in, not a trace remained of the barn, and the leaky boat was used for firewood.

In a rapidly changing world, there was no place for old things, and the glossy shine of plastic, the cold shimmer of metal and glass, the severity of concrete and granite, replaced natural wood from the interiors of progressive citizens, deprived many of the chance to express individuality. History faded into history, and was replaced by luxurious but empty glamor and practical but detached glamor.

But everything is cyclical, so residents of megacities soon began to miss what the post-industrial era could not offer: home warmth, traditions, harmony. By the end of the 20th century, everything natural began to return to fashion; eco-style and vintage, and acquired its own army of followers. The new interiors acquired what they had previously lost: soul, the application of the ideas of harmonious coexistence of man and nature, history and character.

Modern owners of new apartments and newly built houses make a lot of efforts to give their home a character with history, to create a kind of family nest. Old boards in the interior cope with this task perfectly, playing a completely different role in their renewed life than in the past.

New life for old boards

Oh, how attractive, charming and romantic old boards look in the interior, the photos are simply amazing, forcing more and more people to join the circle of fans of this design. Dried by the sun and wind, absorbed by sea salt, cracked by frost or heat, eaten away by bark beetles - these boards have lost their original appearance, but over the years they have only become nobler, more expressive, and “wiser.” Now they are carefully stored in warehouses, trying not to damage them, awaiting new owners who will value and love them even more than in their previous life.

Advice ! That, Whatearlierthrown awayorburned, TodayappreciatedVeryhigh: barnorfencesboards , freight, , partsfurniture, boats, carts - Fortotalthere will beyoursplace.

In a modern interior, old boards have many uses:

• Decorating walls or highlighting only one part to create an emphasis on a functional or decorative area. Such a solution can replace the use of traditional materials (wallpaper, paint, plaster) or can be successfully combined with them if you choose the right texture and shade.

• Laying a floor or highlighting a part of it, for example.

• Use as furniture elements, window sills, doors, bar counters, partitions. The boards can be used as a whole or by cutting parts out of them, with careful adjustment to each other and subsequent decoration.
• Creation of accessories - shelves, decorative panels, or photographs, etc.

Advice ! Originallookelementsinterior, Forcreationwhichwere usedoldboardsdifferentshadesAndsizes.

Creating a harmonious interior

You want to touch old boards, feel their rough texture, the warmth of the wood, and feel the course of history. That is why interiors decorated with such material attract on a subconscious level, and not just with their aesthetic appearance, because people are always drawn to nature and their roots. And in the accelerated rhythm of modern megacities, when you come home, you really want to plunge into a completely different world, far from the industrial cycle with its abundance of cold glass and metal, soulless gray concrete.

Where can I get old boards?

Almost any boards, which are often stored in many people’s dachas, left over from a dismantled barn, etc., will be suitable as raw materials. If suitable materials are difficult to find, then you can buy old boards for the interior in specialized stores.

Of course, their cost is high, since most of the products are unique, come from Europe and the USA, and are decades old. But such boards have that very desired imprint of time: original preserved fittings (locks, signs), old customs stamps, etc. In addition, each item has already passed the preparation stage and has become absolutely safe for the consumer.

Advice ! Can find boards, whose age totals to 2-4 centuries. Similar products offer some suppliers from Northern America And Germany.

You can always search suitable material on online platforms, auctions, where there is always interesting options from those who want to get rid of old or unnecessary things. In this case, there is a greater chance of purchasing the product at a relatively low price.

Another option is to use not old boards when decorating the interior, but their imitation in the form of wallpaper, tiles, etc. Modern manufacturers They offer products that are so realistic that you can only tell by touch that they are “fake.”

Artificial aging

If you have suitable planks lying around at your dacha, but their shade is not suitable for implementing the intended design, then you can always paint them in required colors. It could be pastel, faded or bright shades, one or several at once different boards- it all depends on the chosen style. But the most important thing is that the paint must preserve the texture of the material, so it is better to use compositions on water based, tinting them to your taste.

Advice ! Color board Can solid layer or leaving careless strokes, through which appears original color wood.

Many manufacturers of wooden finishing materials even offer to purchase artificially aged boards, which are practically no different from the original ones, while fully complying with safety requirements and standards. Such boards can be used to decorate walls and floors without thinking that they do not have sufficient strength.

Of course, visually an interior with such a design will look very impressive, but it will remain quite formulaic, so it’s worth filling it at least partially with really old wooden elements.

You can artificially age boards yourself by using suitable compounds and studying one of the many master classes.

Is it worth it or not to create an interior using old boards? Of course, yes, especially since modern fashion practically does not limit the use of such material in the most different styles. Worn, faded, and insect-eaten boards create an atmosphere of unique comfort, fill the room with warmth, “play” with the inhabitants of the house and stimulate the imagination.

There is an opinion that the ever-expanding range of finishing materials should gradually displace and eliminate outdated options, but in reality this is not what happens. Traditional solutions are modified under the influence of modern requirements and appear before customers in a completely different light. The most significant example is wood. Well, it would seem that the material is familiar, but over time it not only did not lose, but also strengthened its position.

Today, interior decoration using wood is considered extremely stylish option design, since wood is not only an aesthetic, but also an environmentally friendly material. Some people mistakenly believe that the only affordable option– wall decoration with clapboard. Actually exists large number alternative paths, which will be discussed below.

Today, the construction market offers a large number of different types of boards: facade, deck, . The last option is the most popular. The demand is due to several reasons.

Material advantages

1. It is quite simple to manufacture, since a variety of different types of wood are used for production: from ash, maple, beech, larch to sweet cherry, cherry and pear.
2. A wide range of shades allows you to choose the right option for each interior. You can purchase wood in a light shade, or you can find material in a deep dark color.
3. Each of the mentioned types of wood belongs to high-quality species and has excellent performance characteristics.
4. Parquet boards as a finishing material for walls look good in the interior.
5. The affordability of parquet boards allows you to decorate a large room without significant financial costs.
6. Additionally, you can “decorate” wood using special stains and wax impregnations. They will not only extend the service life of the material, but also change the appearance for the better.

Prices for different types of parquet boards

Parquet board

Proper covering of the surface with solid wood boards allows you to get a spectacular interior that will be the envy of all your friends. The use of special impregnations based on wax and oils gives the boards a velvet-like appearance. In addition, these products allow you to create a film on the surface of the boards that repels water, which prevents the development of fungus and mold.

Some apartment owners strive to make their homes original and even extravagant in some ways. So if you are tired of boring solutions, then pay attention to the block house, that is, a board whose cross-section imitates the rounded log known to everyone from village landscapes. Using this material you can achieve a real “rural” interior in your home.

To make the design look even more impressive, it is recommended to resort to a method such as artificial “aging” of the wood. For this, the method most often used is “brushing”, that is, processing the material with a wire brush. During the processing of wood, fibers are removed from it, which creates an interesting relief. After this, the material is painted and, without allowing the paint to dry, it is removed.

Tools:

• a simple pencil;
• ruler;
• silicone;
• screwdriver;
• screws;
• glue;
• block for tamping laminate;
• jigsaw;
• hammer;
• moldings;
• thresholds.

Laminate with glue

This method seems to be the simplest and does not require additional skills. To make your task easier, it is recommended to assemble the shields from purchased panels in advance. You should thickly coat the “sides” of the panels with glue and glue the elements together so that you get full-fledged shields. These are the ones we have to fix on the surface of the wall. It is important that it is prepared in advance. It will not be superfluous to carry out markings.

The only thing to remember for a successful result: work should start from the lower left corner. In this case, it is recommended to remove the platbands, which are then installed in the old place.

Laminate on sheathing

Stage 1. We take the necessary measurements, calculate the amount of laminate, as well as the number of moldings and other parts that will be needed for fastening.

Stage 2. Using a ruler and pencil, apply markings to the surface of the wall.

Stage 3. Remove platbands from doors and windows.

Stage 4. We install the sheathing, that is, the frame. This is done quite simply - take wooden blocks and are attached perpendicular to the floor, but parallel to each other at a distance of 40 cm.

Stage 5. We begin to install the material, as already indicated above, from the lower corner of the left side of the room.

Stage 6. Cut the wood in the corners using a hacksaw or electric jigsaw
Stage 7. Arrange the planks in a checkerboard pattern.

Stage 8. Treat the joints with silicone.

Stage 9. Latch the locks.

The technology of laying it on the wall is really very simple and will not cause any difficulties.

Prices for different types of laminate

Wood wallpaper is an alternative to real wood finishes. Used as a basis paper base, and a special wood veneer is applied to it. The material is sold in rolls.

The cost depends on many factors, but the main criterion is the price of raw materials.

The process of applying wooden wallpaper to the wall surface is not much different from the technology of applying conventional wallpaper. The only difference is the result, as we end up with a wall that looks like it was made of wood.

One of the most unusual and popular interior design options today is saw-cut finishing. A transverse section of a trunk of small thickness is used as the main decorative element. This method finishing is so popular that by now manufacturers have already begun to produce wallpaper and tiles that imitate such a pattern. Decorating the log walls in a room is very simple.

First of all, you need to decide how much area you want to occupy with cross sections. Experts do not recommend overdoing it, since an unusual type of decoration on a large scale can only spoil the interior. The best option– one wall, preferably the one located at the head of the bed.

It is necessary to paint it in a calm color, and then apply logs using special high-quality glue. They can be attached close to each other or you can come up with an interesting fragmentary pattern. It all depends on the imagination of the performer.

The most popular type of wall surface finishing using panels is considered to be a herringbone pattern. To implement this, you will need tools such as a protractor, a hacksaw, adhesive tape (double-sided), casing and a pencil.

The finishing process consists of several key stages:

• calculation;
• marking;
• cutting planks;
• fastening.

Let's look at each of them in more detail.

Step 1. Draw up a diagram of what it should look like on a piece of paper. finished wall. It is very important to pay attention to the accuracy of measurements. This is an extremely important stage, so you should not approach it carelessly.

Step 2. Draw clearly in the middle of the wall using a simple pencil straight vertical line. It will serve as a boundary for correct installation panels.

Step 3. Prepare the panels. This means we take them and cut them at a 90 degree angle so that one edge is slanted. One half of the boards should be cut from the right corner, the other from the left.

Step 4. Take double-sided adhesive tape and attach it to the panels. It is important that each strip has three longitudinal strips of tape.

Step 5. First of all, we attach the middle elements. For this you will need an assistant. We apply the planks at oblique angles, focusing on the drawn line. It is important to ensure that there are no gaps between them.

Step 6. Fix the panels on the wall. To do this, remove the protective film from the elements and press the planks tightly to the surface.

Step 7

This option is most often used for bedrooms, but you can try it in the kitchen as an experiment. Don't be afraid to trust your taste and realize your fantasies. In addition, wood is a material that makes it easy to realize creative ideas.

Prices for popular finishing wall panels

Wall panels

Video - DIY tree on the wall

Video - Wall decoration with wood: a variety of options

Modern interiors amaze with their diversity and unusualness. Every day designers come up with new and new “tricks” and subtleties. One of them is decorating the room with old boards. This technique makes the interior more comfortable, mysterious, and unique. The cracks, chips, and traces of nails on them amaze the imagination and stimulate one to solve the riddle: who and where did this person serve before? building material, how old is he. Old boards in the interior will ideally complement such styles as country, shabby chic, loft.

Currently, it is fashionable to introduce wood into the interior of a room. It fits well when decorating houses, apartments, offices of reputable companies, and restaurants. Old boards are valued among experienced designers, with their help you can create several interior options, especially since in the 21st century everything antique, rare, and exclusive is valued.

Every owner wants his home to be different from others, looking for his own style and interesting decor options. Moreover, finishing houses with wood began many centuries ago. With his help, the atmosphere was cozy and warm.

A new wooden house always had a delightful aroma of fresh wood and resin. But it became truly lived-in and family-friendly after a few years, when the room acquired its own special smell, the wood was painted several times, and had chips and cracks. Returning to such a house, the individual was always immersed in pleasant memories filled with the smell of pies, warmth and comfort. Even the creaking of the floorboards is pleasant to the ear.

Option for using old boards in the interior

Room design with old boards

It is always sad to demolish the houses of grandparents, since modern plastic, glass, metal, concrete can never replace wood. Modern glamor is undoubtedly beautiful and luxurious, but emotionally empty. Therefore, at the end of the 20th century, eco-style and vintage became popular.

Due to the presence of this material in modern interior The “soul”, the harmonious existence of man and nature, began to appear.

Most people, having built their house from scratch, try to make it a family nest, where everything is individual and unique.

Beautiful design with old boards

Modern room interior with old boards

Looking at a wall made from old boards, questions involuntarily arise about their past life, where the cracks appeared on them. Maybe they were dried out by the sun or cracked by sea water, or maybe. They were simply attacked by a common bark beetle. There are no answers to all these questions, all that remains is to fantasize. New owners always try to treat them more carefully than in their previous life.

Option for using old boards in the interior

Room design with old boards

Old boards in the interior of the apartment

Application options

Old boards are very relevant for creating interiors for modern designers. Application options are numerous:

• Decorating an entire wall.
• Decorating part of the wall as bright accent or functional area.

Both of the above options combine 2 functions: they are a finishing element and fully replace finishing materials such as wallpaper, plaster, paint. But for everything to work out organically, you need to very carefully select a combination of tones and shades.

Beautiful design with old boards

Modern room interior with old boards

• Full or partial flooring.
• Podium selection.
• Furniture elements made from old boards: door, bar counter, partition.
• Furniture accessories: shelf, table, stool, panel, photo frame.

Interior items made from boards look beautiful and unusual different shades, sizes.

Option for using old boards in the interior

Room design with old boards

Old boards in the interior of the apartment

Although old wood is very valuable, not every tree is valuable. It is not enough to tear down a long-built fence in a country house and sell the material as unique.

1. Old boards in the interior are good, but in reasonable quantities. Finishes or objects should not attract unnecessary attention. The tree should not be conspicuous, it is necessary to create a certain style, organically fitting into it. When developing you need special attention pay attention to the thickness, size, shade, possible pattern of the working material.
2. Experienced designers do not recommend decorating the entire perimeter of the room with wood. It is better to choose 1-2 large elements, then complement the finished interior with accessories. This could be the frame of a massive mirror, a wardrobe, a table, or a headboard. If you overdo it, then when examining the room you will get the impression of a cluttered corner.
3. To prevent the design from becoming too gloomy, during the renovation process you can use good textiles and some modern finishing materials.
4. A brick wall will look great against the background of antique surfaces.

Beautiful design with old boards

Modern room interior with old boards

Each room has its own board

Living room	This is exactly the room where a whole wall made of old boards would fit perfectly. Its discreet beauty, scuffs and cracks will be an excellent addition to modern furniture and accessories. You can also make the floor out of wood and decorate it with a Persian rug. Every living room should have large mirror. It is ideally complemented by a massive frame made of aged material.
	When decorating a bedroom, everything is much simpler. You can make the headboard “old” sleeping place, dressing table, place several on the walls or ceiling decorative beams. If you don’t skimp on lighting fixtures, buy good ones ceiling lights, their light will highlight all the scuffs and cracks.
	Traditionally, cabinet fronts, chairs, and stools are made from aged specimens.
	A place where a board in the interior will only inspire, put the owner in a working mood, and in the evening relax, immerse in an atmosphere of reflection.

Option for using old boards in the interior

Room design with old boards

Old boards in the interior of the apartment

How to get special finishing material

It can be found almost everywhere. You can get it from most individuals at their dacha or country house. If suitable options no, you can buy it in specialized construction stores. All old boards come from Europe, so you need to be prepared for the price to be quite high. There are also advantages to the purchase: 100% quality guarantee, the material has passed all stages of preparation, and is absolutely safe. You can also age the surface yourself, but this requires special tools and working material.

Beautiful design with old boards

Modern room interior with old boards

Old boards in the interior are becoming more popular every day because of their versatility. They fit organically into any style, emphasizing it favorably. Additionally, its advantages include environmental friendliness and a unique feeling of relaxation and tranquility.

Video: Panels from old boards

50 photos of ideas for using old boards in the interior:

Designers are increasingly using not ordinary wooden boards, but technologically advanced, beautiful and incredibly diverse ones - parquet. Let's talk about the features of parquet on the wall in the interior.

Features of wall decoration with parquet

Parquet features

Let's start with the basics. Parquet board is a three-layer plank 1 to 2 m long, 180-200 mm wide, 14-22 mm thick. Its top layer is made of valuable rocks, and the next two are made of cheaper ones. coniferous species. During production, the surface of the planks is coated with protective layer. This may be, which increase the wear resistance of the material and facilitate maintenance. Parquet boards have a locking connection system. When assembling, the tenon of one board is inserted into the groove of another and snapped into place.

Wooden boards are hygroscopic. At high air humidity they tend to increase geometric dimensions, which will cause warping of the planks. At low humidity, due to drying of the wood, the dimensions will decrease and a gap may appear between the wall and the parquet. Due to the multi-layer construction of parquet boards, these phenomena are not as noticeable as with solid wood products.

Optimal conditions for this material: room temperature - 18-22 ° C; relative humidity- 40-60%. These conditions are maintained with the help of humidifiers in winter during heating season, and air conditioners with a humidity reduction function - in summer.

Why use parquet on the wall

Wall decoration with parquet is popular because easy installation and natural patterns. Traditional wood species for our latitude are used as the top decorative layer: oak, ash, birch, walnut, and exotic ones from different regions of the world: sapele, zebrawood, tigerwood, merbau. Due to the small thickness (0.6-6 mm), the cost remains affordable, unlike solid wood coating.

The coating becomes even more interesting due to the processing methods: staining, tinting, thermal treatment, brushing and creating micro-chamfers on two or four sides. These small cuts along the perimeter of the plank give a feeling of volume and at the same time hide the influence of seasonal humidity fluctuations.

Decorative techniques

Long and narrow elements are laid horizontally, vertically or diagonally; you can finish the entire wall or individual fragments. If you want to get decor without end joints, look for large size boards with a length of 2,200 mm or more. When laying diagonally, to reduce the amount of waste, short length strips are preferable. However, regardless of the laying scheme, when ordering material, it is necessary to add 5% to the actual cladding area for possible trimming.

Which wood to choose for walls

On the wall boards don't need the same reliable protection from abrasion, like on the floor. Therefore, products with top layer from any type of wood, including medium and low hardness: cherry, pear, alder, birch, which are not very practical on floors. Compositions for treating the surface of wood (varnish, oil, oil-wax) are also considered from a design point of view. In some interiors, for example, in the kitchen, it is preferable to boards with a spectacular and bright glossy varnish, and in the bedroom or living room - with colorless oil, which creates the impression of natural untreated wood.

Manufacturers floor coverings Special series of boards and decorative panels for walls and ceilings, including those with complex surface relief or 3D effect, began to be produced from wood. In combination with others wooden elements interior (floors, stairs) the harmony of material, shape and color is most fully manifested.

How to install parquet on a wall

To lay parquet on a wall, you need to order it when all the wet processes (laying out the screed, plastering and puttying of walls and ceilings) have been completed, the leveling layers have dried, and heating and ventilation system well established. Laying of the coating begins only when the moisture content in the base drops to 2–3% (more accurate data is indicated by the manufacturer in the instructions for concrete material). Otherwise, the slats will absorb evaporating moisture, increase in size, bend, and in the worst case, the slats of the top layer may peel off.

Remember that the same rules apply here as when installing parquet boards on the floor. Before starting work, sealed packages with material are kept in room conditions at least 48 hours for acclimatization. Don't rush, especially if the boards were brought in from the cold. warm home. Condensation immediately forms on them. The wood absorbs it, and if you start laying it right away, then after some time gaps will appear between the planks. Small (1 cm) deformation gaps must be left at the joints with the floor and ceiling.

The installation method also plays a role, for example, herringbone parquet creates the most uniform load on the wall.

Installation of ceiling-wall panels on plasterboard sheathing

To make the wall look more harmonious, it is advisable to open several packages, lay out the elements on the floor, selecting them by color and texture. After all, wood is a natural material, and it is impossible to find planks with the same pattern and color. Install parquet boards on any flat base: plastered, plasterboard. The main thing is to choose the appropriate fixing method and adhere to the process technology, carefully study how to fasten the boards. You can trust this to any craftsman who is familiar with laying parquet boards on the floor.

Installation of ceiling and wall panels vertically

First of all, you need to create an installation diagram. This will be followed by preparing the base (floor and walls), installing beacons (initial rows that will set the direction), laying parquet planks, sanding and varnishing.

Alternatives to parquet

Laminate

Parquet on the wall in the interior can replace laminate from the “French herringbone” series; it must be laid with an expansion joint of at least 10 mm wide along the installation perimeter, around risers, along thresholds and under doors.

Porcelain tiles

Ceramic tiles in a chevron design can be installed with barely visible seams. Before installing them in residential premises, you will need to install an electric heated floor.

Wood with optical fibers

Pay attention to the panels made of laminated solid wood with the addition of optical fibers. They are placed between layers of wood in a strict geometric order. The optical fiber transmits the luminous flux, and the tree acquires the ability to conduct light.

The panels can be used for doors, furniture and play a role decorative finishing walls and ceilings. Especially if you replace it with a glowing raster image. Since the panels are 99% wood, working with them (processing, sawing, applying varnish, wax, stain, etc.) is no different from working with ordinary wood.

Wood wallpaper

In order not to lose centimeters usable area, look for wallpaper that imitates wood coverings. Wall decoration with this finishing material will take incomparably less time and effort, and the visual effect will be the same. Wallpaper decors are very interesting from the point of view of beauty and color possibilities. These are not only classic natural beige-brown shades, but also an original reproduction of aged and painted wood. The most realistic picture of wood trim will be created by photo wallpaper. They can be made according to individual order and exactly match the size of the wall.

15190 0 0

Finishing board like original decoration your home

In the history of our country, finishing boards for walls, both external and internal, have been used for a very long time. IN this review we will talk about what kind of decorative boards for wall decoration there are, and in what design areas it is in demand today.

Wooden board for finishing - what is it like?

A true motto modern world can be called a slogan - “Let’s go back to the wild, but at the same time let’s not forget to take with us all the benefits and conveniences of civilization”. And although in its pure form this task is practically impossible, in design, wall decoration with boards has become one of the symbols of naturalness in the interior. Of course, there are both pros and cons here.

Advantages and disadvantages of wood finishing

• Naturally, the first thing that advertising trumpets and absolutely all designers talk about is the environmental friendliness and naturalness of wood. Shining polished furniture and facing slabs made from wood is certainly good. But you must admit, the finishing is not edged board in appearance it is much closer to wild nature;
• Wood, of course, is not stone or concrete, but still such cladding is quite durable. Plus, the board is elastic, and where the stone breaks or the plaster cracks, nothing will happen to the board;

• A house decorated with wood is not only beautiful and prestigious, but also warm. This cladding itself has a fairly low level of thermal conductivity;
• Facade boards for exterior decoration of a house, being a porous and elastic material, have always been considered an excellent sound insulator;
• Wood finishes come in a fairly wide range of colors. Now you can choose your own type of wood to suit any design; even the notorious one does not shy away from board inclusions. And thanks to modern impregnations and stains, the facade and interior cladding can be decorated to your liking;

• A beautiful, natural look and the pangs of creativity at the birth of a new design are certainly interesting things. But there's another one important point, any home craftsman can install such cladding with his own hands.

You can take my word for it, the instructions for installing the board on the wall can be mastered within half an hour. There are 3 types of board fastening: end-to-end, overlapping and using the tongue-and-groove system. And all these types are extremely easy to learn.

Like any finishing material, wooden boards are not without their drawbacks. Although here a lot depends on how you look at these shortcomings:

• Many critics point to the high cost of such finishing. Of course, if you decorate a house or cottage from the inside, for example, with oak parquet boards, then the price will be exorbitant;

By own experience I can say that finishing a bathhouse with unedged boards made from species such as pine and linden is quite affordable for the average person, even taking into account the cost of protective impregnations.

• Wood burns well and there is no escape from this. Nowadays, many fire retardants (fire-retardant impregnations) are produced, but, firstly, they are chemicals, and secondly, fire retardants only reduce the flammability of the material;
• And one more negative point, in which I fully support the critics, is the need for periodic prevention. Especially when we're talking about about finishing with unedged boards on the outside and cladding wet rooms with wood. IN in this case protective coating on wood will need to be renewed every few years.

Let's understand the terminology

It is commonly called a board wooden products, in which the width of the strip is 2 or more times greater than its thickness. If the plank does not meet this requirement, then it is already a block or beam (a block has a cross-sectional side size of up to 100 mm, and a beam has 100 or more millimeters).

• Edged board is the most common building material. In this case, the product is processed on all four sides. Moreover, the processing must be carried out using a technical method, cutting, planing or grinding;

• The unedged board is technically processed only on two wide sides. Simply put, a “wild” log is taken and dissolved on a sawmill in one plane. As a result, the edges of such planks remain untreated, often even with bark;

• The so-called wane or slab are cuts of a log along the edges. In fact, in such planks there is only one flat plane; they are not processed on the reverse side. Such wood has always been considered waste from wood processing; it could only be used in inconspicuous places, for example, for arranging a roofing pie;

Modern designers have found another use for this material and create original panels from slab.

• There are also such specific terms as frontal, terrace and shipboard. But they no longer come from the type of processing, but rather from the purpose:

1. Thus, the place for the frontal board has always been considered the transition zone from the walls of the house to the roof; in some cases, this was the name of the material used for manufacturing carved frames and pediments;

1. A ship's board is a fairly thick, well-planed plank, originally intended for finishing the outer sides and decks of ships. Luxurious view, beautiful texture And highest quality surface treatments have made this expensive material one of the most popular not only in construction, but also in design;

1. A terrace board is, in principle, the same as a ship board; as you can understand from the name, it was intended for paving floors on open terraces. Although the wood used here is not so expensive. Therefore, finish the balcony terrace board or clad the façade with it will be cheaper than with a ship's one.

Types of finishing boards

Now let's move on to the most popular types of material. And if we take it in percentage terms, then, of course, lining can be considered the queen here. These strips got their name back at the beginning of the 20th century, when they were used to line the inside of railway cars.

A distinctive feature of this popular material is the tongue-and-groove connection. In the vast majority of cases, such cladding is mounted on a frame made of wooden blocks.

There are many types of lining, although imitation and block house are deservedly considered the most common. Everything is clear with the imitation of timber, but under the outlandish name of block house there are planks that copy the appearance of a rounded log.

Now many are trying to distinguish the block house into a separate niche. I was specifically interested in this issue and I can assure you that a block house is one of the types of lining.

The planks may have different sizes and intended for outdoor or interior decoration, but all attempts to highlight the block house in independent species finishing is just a marketing ploy.

Exactly the same as “eurolining”. It differs from the usual one only in strictly fixed sizes. And also the mandatory presence of compensation cuts on the back side.

Modern parquet board also joined according to the tongue-and-groove principle, but here you get a perfectly even and durable coating. Previously, this material was made from solid, well-dried and impregnated protective compounds array.

Nowadays, parquet boards are often glued together from several planks. And some careless manufacturers even make it from thick plywood.

The so-called planken or planking board is exclusively a decorative and finishing material. If you understand the history of origin, then planken can be safely called the grandfather of modern lining.

The fact is that initially the cars were lined with even boards and only a little later, a tongue-and-groove connection appeared on these boards. But the planks, out of habit, continued to be called clapboard.

The term planking board was again coined by good marketers. After all, it was necessary to somehow call smooth planed boards without tenons and grooves, but with a chamfer on the front side.

Interior wall finishing with planking boards can be done either end-to-end or overlapping. But on the facade, most often the plank is mounted only with an overlap. Moreover, the slats are packed horizontally so that rain can easily flow down them. This is a kind of wooden tile.

The chamfer on the front side of the planking board can be either rounded or have straight corners. But remember, if you decide to mount planks end-to-end somewhere, you should leave a gap of a couple of millimeters between the planks (the thickness of a match). It is necessary to compensate for the expansion of wood during fluctuations in temperature and humidity.

Types of wood from which finishing boards are made

It is no secret that in addition to beauty, natural wood also has a beneficial effect on human health. Personally, I have never heard of anyone being allergic to a particular type of wood. In the table below I have outlined the main characteristics of the most popular breeds on the domestic market.

Characteristics and average cost of finishing wood
Wood species	General characteristics	Average price
Hardwood
Linden	It has a light color and a smooth, uniform texture. It practically does not heat up, so it is often used as a budget option for finishing a steam room in a bathhouse.	From 700 RUR/m²
Alder	Alder is valued as an antiseptic. Its aroma can kill pathogens in the room and prevent the appearance of mold and mildew.	From 900 RUR/m²
Oak	It belongs to the elite breeds and has unique strength. The color range of different types of oak can range from light with a golden tint to dark with burgundy splashes.	From 3000 rub/m²
Ash	Clean and light wood with original texture. In terms of strength, ash is not far from oak, so it is quite difficult to process.	From 1500 rub/m²
Aspen	Aspen has an original color and texture. It, like linden, is often used for cladding steam rooms. It is also valued for the fact that it practically does not rot, which means it does not require aggressive impregnations for protection.	From 1200 RUR/m²
Coniferous wood
Larch	Larch has a number of advantages. Its beautiful color and texture cannot be confused with anything else, it is not subject to rotting, has high strength and at the same time has good elasticity. This is the same ship plank that I spoke about above.	From 750 RUR/m²
Cedar	This pearl of Siberia is valued almost as much as larch. Although it is inferior to larch in strength and resistance to aggressive environments.	From 550 RUR/m²
Pine and spruce	In terms of finishing, pine and spruce are almost equivalent. Their undeniable advantages easy processing, affordable cost and beauty are considered.	From 350 RUR/m²

Subtleties of wooden wall design

If we talk about design as such, then you will agree that lining is in no way suitable for the role of original finishing. This material has a strong association with balconies, garages and bathhouses.

I mean something exclusive, something that others don’t have and preferably for reasonable price. And here it’s better for us to work with edged boards, unedged boards and slabs. As a last resort, you can use old boards and parquet boards.

But you need to be very careful with old boards, otherwise instead of originality you can end up with clutter.

Where is the best place to put emphasis?

Decorating the walls with boards will only look good if it is done in doses. In other words, you shouldn’t sew up the whole house with the same material, as you definitely won’t achieve exclusivity.

A wooden panel should catch your eye immediately upon entering, which means it needs to be connected with other interior details. There are 4 suitable places for interior wood decoration in the house:

1. In the bedroom, natural wall decoration would be appropriate at the head of a wide bed. This can be only a fragment covering the head of the bed and side tables or the entire wall;

1. The wooden background will contrast perfectly with the wide plasma TV. This way you can organically combine the naturalness of wild nature with the technocratic benefits of civilization;

1. Your favorite sofa, in front of which you watch TV with the whole family in the living room, will also harmonize perfectly with natural wood. Especially if this sofa is covered with genuine leather. But keep in mind, here you need to choose one thing. Either decorate the wall behind the TV or behind the sofa, otherwise the zest will be lost;

1. In the kitchen, even if it has a substantial size, there are also only 2 walls on which wood trim will look good. This work area, that is kitchen apron and everything around him. AND dining table, only if this table is adjacent to the wall.

Although that's all classic options. No one is stopping you from creating. For example, in my house, a corner in which there is an aquarium and a cage with birds is covered with an unedged board. Add some live indoor vines and you get a corner of wild nature in your own home.

Styles with which wood harmonizes

In general, in design it is believed that wood can fit into absolutely any style. Even high-tech with its black and white paints, strict forms and shine of nickel-plated parts, is quite loyal to natural wood. True, it is better to use glossy and laminated surfaces; an unedged board will be alien here.

Eco-trends, in addition to the already traditional trend in the spirit of “back to roots,” include Asian, in particular japanese style. Although rough shapes are not welcome in Asia, all details must be carefully processed.

The so-called country direction includes a lot of different branches. This is American, English, scandinavian styles, rustic and, in essence, all ethnic trends. This is where you can arbitrarily arrange a board with rough processing.

Worth it separately French Provence and the Mediterranean. They welcome the design of whitened planed boards. In addition, glossy inclusions would be appropriate in an Italian theme, but without fanaticism.

If you want to decorate your interior in a retro style, you don’t have to cover everything with aged or old boards. Brushed wood with a highlighted texture and light cracks certainly won’t hurt, but I repeat once again, don’t get carried away.

• The board can be attached to the lathing or glued to the wall. There are plenty of adhesives now, but Liquid Nails are usually used. If you decide to glue the material, the wall will have to be perfectly leveled;

• Nowadays you won’t surprise anyone with single-color cladding, even from elite wood species. Don't be afraid to experiment with different colors, or better yet with different breeds wood, this will give your wall additional volume;
• The layout of vertical, horizontal and diagonal laying of planks looks great. Even a classic parquet herringbone can be inserted in fragments;

• Golden oak can be diluted with pink Karelian birch boards or rich burgundy splashes of cherry;
• My advice to you is to use synthetic varnishes and paints as little as possible for interior decoration, or better yet, give them up altogether. The wood will look good and will not lose color for a long time if it is coated with linseed oil once a year. To preserve the aroma of, for example, natural pine needles for a long time, you need to infuse this pine needle linseed oil within 2 weeks;

• To ensure that your design masterpiece does not fall out of the overall ensemble, it is advisable that the leading color of the wall be repeated in some other interior details;
• If the wall is plain with polished or laminated coating, you can revive it with the help of accessories, decorative shelves with figurines, light bulbs, pictures, etc.;
• Decorating the walls with boards in a nursery is a separate issue. Firstly, I do not recommend that you put the planks on glue, no matter how high-quality it is, your child can pick out these planks. Secondly, something durable and smooth, for example, a parquet board, would be appropriate for a child’s room. It is better not to use an unedged board or slab here; the child may get hurt or get a splinter.

Conclusion