Do you want something new and fresh in your kitchen interior, but don’t want to undertake a major renovation? Great option– decorate the old kitchen so that the room sparkles with new colors. From this article you will learn how to transform your interior beyond recognition with little material and labor costs. You will only need a little imagination and available materials. Let's go!

IDEA #1

An option from the “cheap and cheerful” category is to use self-adhesive film. This one is relatively inexpensive material after some simple manipulations it will change the furniture beyond recognition. Available in stores large selection such films: they come in one color or with bright unusual prints; they can imitate any material: marble, tile, wood, etc. Do you see how wide a choice you have? In addition to its decorative properties, high-quality film is valued for another thing: it is moisture resistant, not afraid of the effects of temperature and mechanical damage. Thanks to this, it can be glued not only to the facade of the kitchen, but also to the countertop.

Update old kitchen this way it won't take much time. List necessary tools not that big, not to say tiny. To create beauty you will need the material itself, scissors and a ruler. By the way, some companies apply a grid on the paper on the back of the film, so you can cut perfectly evenly. If you don’t need global changes and you just want to refresh the look of the room, then you can purchase vinyl stickers. They can be glued to any flat surface: kitchen facade, refrigerator, table, apron. Manufacturers offer various topics stickers: these could be delicate flowers, and funny images of animals.

IDEA #2

The most obvious DIY option for remodeling an old kitchen is to paint it. A new color can give furniture new life. Rest assured, your guests will think you've purchased a new set! An option for the brave is to combine several colors, then the changes will be dramatic.

IDEA #3

How to restore an old kitchen using other materials, ceramic tiles for example? It's a stereotype that it can only be on the wall. This material will look great on the kitchen façade! The tiles can be the same as on the apron - if you don’t know where to put the leftovers after repairs. Then the motives for different surfaces will overlap, and the kitchen will become very harmonious. Otherwise, you can play on contrasts and decorate the doors contrary to general style rooms.

How to pull off this trick? It's simple: remove the doors from their hinges, clean their surface, and paint if necessary. The tiles are attached to the facade using special glue. If the pattern does not seem self-sufficient to you, then you can frame the tiles in a frame made of decorative molding.

IDEA #4

If the methods described above do not suit you, you will still have to damage the integrity of the furniture. We propose to turn an old kitchen into a new one using new doors. Of all the proposals, this option is the most expensive, however, the result will be more noticeable. In any case, it will cost much less than buying a new headset. If your kitchen model is quite popular, then finding its front will not be difficult. If such furniture has gone out of fashion or was not very common at all, then you will have to look for or order doors. Fortunately, there are quite a lot of companies that offer similar services.

You can vary the cost of restoring an old kitchen. Cheap options: doors made of pine, plastic, chipboard. You will have to spend more money on MDF or solid wood. The installation of new doors can be done by specialists from the same company where you ordered them. However, anyone who is familiar with the word “repair” can handle this simple task. Modern furniture is usually assembled quickly and without any extra effort.

And a few more tricks on how to remodel an old kitchen.

Trick #1

Tip for the lazy: you don't have to remodel an old kitchen to make it look new. You can simply take your eyes off old furniture bright accessories. Colored curtains, clocks, dishes - and all eyes are focused on them. However, keep in mind that if the condition of the furniture really requires repair, then such a trick will not always be successful. Another nuance: kitchen cabinets must be neutral color, otherwise the placement of accents will only make the interior too colorful.

Trick #2

Open shelves will lighten the kitchen interior. They also provide more design opportunities, because in this case the tone will be set by the contents of the shelves. Beautiful dishes, original jars for storing cereals - and now the boring kitchen has turned into an island of brightness. To change the interior, just change a few items. Thanks to this, the room will not have time to bore you.

Trick #3

Buy black or brown paint and paint over one cabinet or part of a door. And now there was a place in the room for notes. Here you can mark a list of products you should buy or favorite recipes. The surface is also suitable for leaving a message to your family. By the way, you can buy special vinyl stickers on which you can write with chalk. Then you won't have to bother with paint.

Trick #4

Who would have thought that simple handles could change the interior so much? It would seem like this small detail! But their replacement will be noticeable. By the way, long tubular handles are very fashionable now. Even soviet furniture they will turn into a modern set.

Trick #5

If you want to follow this when remodeling your kitchen rustic style, then you can replace the cabinet doors with curtains. This will make the interior more airy. In addition, this will make it easier to get to the dishes.

Trick #6

Moldings are decorative volumetric elements that can turn an ordinary cabinet into an exquisite piece of furniture. It is attached with special glue.

When you can't afford a new kitchen set, you don't have to sit and sigh, looking at the peeling countertops or worn-out chair backs. With a little effort, restoring kitchen furniture with your own hands will breathe new life into it.

Restoration of kitchen furniture

Of course, replacing functional furniture elements (tabletops, etc.) can only be done by a professional. But easier types of restoration work are available to any home craftsman. These include:

• replacement and restoration of fittings;
• attaching self-adhesive film;
• coloring;
• varnishing;
• fabric trim;
• seat reupholstery;
• gluing tiles.

Accessories

First of all, replacing the following elements is necessary to restore the functionality of the furniture, but at the same time a minimal update of its appearance is ensured:

• loops;
• guides;
• pens.

Replacing and relocating door hinges

A common problem is that the hinges are still in working order, but the places where they connect to the elements are loose or pieces have even been torn out. In this case, relocation of the door hinges is required.

Stages of work:

• dismantling old hinges;
• marking holes for new hinges;
• drilling holes;
• installation .

Now the doors of the wall cabinets hang straight and shine with new hinges. But what to do with the holes for the old hinges? They must be carefully sealed with acrylic-based putty.

On the construction market you can find a whole range of such putties, designed specifically for masking irregularities and depressions in wooden surfaces. Since these compounds shrink, they need to be applied in 3-4 layers and then level the surface of the putty with sandpaper. Final stage masking old recesses under hinges - applying varnish or paint (the choice depends on the color of the furniture). About design ideas for the kitchen can be read in.

An equally common type of breakdown of kitchen fittings is the failure of guides in drawers. If the original assembly had roller guides, it is better to replace them with ball ones. The replacement technology is simple: the fasteners are unscrewed, the old guides are removed and new ones are installed.

Replacing handles can already add new notes to the appearance of the kitchen facade. But they will look aesthetically pleasing only if the entire set of handles is replaced, so it is important to choose the same ones for all cabinets and drawers.

When choosing handles, be creative and choose a design that is different from the previous one. At the same time, it is worth remembering the compatibility of materials: for example, plastic ones will look inappropriate on a fiberboard facade, and metal ones will look banal. Handles made of combined materials, for example, metal with wood or glass inserts, look impressive. You can read about art-style kitchens in this article.

Facades

The following types of restoration of kitchen facades without the use of paints and varnishes are available at home:

• gluing vinyl film;
• pasting with fabric or oilcloth (decoupage);
• molding.

Pasting with vinyl film

This type of furniture redesign is drastic (you can completely change the color and pattern), but it doesn’t break the bank.

The range of self-adhesive films is huge, there is plenty to choose from.

When purchasing self-adhesive, first of all, pay attention to the quality of the print - the pattern should be even, without color variations along the entire length of the material.

Self-adhesive film can be smooth or textured, imitating various materials: surface of marble, wood, fabric, etc. The average service life of such film is 3-4 years. The convenience of self-adhesive film as a material for redesign is that a damaged or torn section is easy to replace.

An interesting solution is restoration kitchen facade film in two color variations: top part in light colors, the bottom one in dark colors, or vice versa.

Working mechanism:

1. Measurements of the height and width of cabinets and drawers. For ease of measurements, there is a grid with a 1X1 cm square on the back side of the vinyl film. All necessary parameters must be marked only on the back side! In places where the film is folded, an allowance of 20 mm is left.
2. Open the films. The vinyl film is cut with sharp construction scissors, with an indentation of 2-3 mm from the contour line.
3. Preparation of façade parts to be pasted. The handles are unscrewed, the surface of the panels is cleaned, degreased and left to dry completely.
4. The film is glued from top to bottom, the reverse paper layer is removed gradually. It is important to ensure that there are no air bubbles between the film and the surface of the furniture: they are very difficult to remove once the part is already glued.
5. Smoothing the surface of the film with a rubber roller.
6. Screwing the fittings into place.

Watch the video instructions, where you will see all the nuances of the work clearly.

It is difficult to carefully stick the film while hanging, so it is better to unscrew the façade elements and place them on the floor for measurements and pasting. It will take longer, but the work will be done more thoroughly.

Decoupage

The decoration of furniture facades with thick fabric is a distinctive element of the fashionable Provence style. imitate provencal design You can use an equally fashionable method of decoration – decoupage.

The choice of decoupage material depends entirely on your personal preferences. Decoupage elements in ethno-style – “Petrikovskaya painting” or “Gzhel” ornaments – look original and appropriate in kitchen decor in light colors.

Decoupage stages:

• Surface cleaning. In order for the fabric to lie flat on the surface of the facade, without wrinkles and creases, it is necessary to get rid of pores or microcracks, if any, using the same wood putty. After the putty has dried, the entire surface on which the fabric will be glued must be treated with fine-grained sandpaper.
• Gluing the fabric to the prepared surface. For this regular will do PVA glue.
• Coating the decoupage surface with acrylic varnish. Varnishing is carried out in 3-4 layers, the next layer is applied only after the previous one has dried. It is most convenient to use a brush with a long but narrow brush.

The fabric can be used to cover not only wooden, but also plastic or glass kitchen surfaces. There is no need to clean them, just thoroughly degrease the area where the fabric will be glued.

The material for decoupage can be not only fabric, but also ordinary fabric with a pattern you like.

Another interesting option restoration of kitchen furniture with fabric - decor hanging cabinets fabric from the inside. It will give new life even to ancient cabinets that are missing doors. The fabric is stretched over the corners of the cabinet and fixed with nails and screws. Dishes and kitchen utensils look much more interesting against a background of stretched plain or patterned fabric than against a bare board.

Decoration with molding (pasting)

Molding is another type affordable decor kitchen unit panels. It consists of overhead elements made of wood or plastic, which are attached to the facade with wood glue. Classic molding comes in the form of wooden strips, which are cut to the desired length and with which you can form decorative elements to your liking. But you can also buy decorative molding imitating molded or carved elements. We can say with confidence that if you have such a set, how to choose wallpaper for classic cuisine can be read in.

The combination of molding with other types of restoration, for example, repainting, can completely update the appearance of the kitchen unit.

Treatment of furniture with paints and varnishes

Restoration of kitchen furniture using paints and varnishes involves the following types of work:

• coloring
• varnishing;
• stain treatment.

Painting it in a contrasting color to the previous one will radically update the appearance of the entire kitchen space. The most suitable coloring agent is auto enamel, which is resistant to aggressive environments ( high temperatures, increased acidity, etc.)

Coloring

1. Dismantling the facade. At this stage, the elements of the set to be painted are removed, all handles are unscrewed and the glass is removed. Areas that are not planned to be painted must be sealed with mounting tape (you can also use it to cover glass if you cannot remove them). If the surface of the facade is covered with MDF film, it must be completely removed. A hair dryer is used for this purpose.
2. Sanding the surface with sandpaper. It is convenient to use a construction float.
3. Coating the surface to be painted with wood primer. The composition is applied in two layers.
4. Direct coloring. Here you can apply different instrument: brush, roller, spray gun. It all depends on the skills of the master. If your hand is not full enough in the finishing area, it is easier to use a roller.

If the usual coloring does not impress you, try adding some zest to it with the help of glitz. It is a translucent paint with a thick texture. Glizal is applied to the prepared (cleaned and primed) surface in a thick layer. Next, patterns are formed on the still wet paint using a sponge dipped in water. An unfortunate line or curl can always be removed by running a roller across the work surface. You can find out about ceramic tiles for backsplashes.

Expert advice on working with paints and step by step instructions how to transform wooden instructions:

Varnishing and staining

Return presentation kitchen units from natural wood opening it with varnish will help. By choosing a clear varnish, you will update the natural color of the wood, and if you use a varnish with pigment, you can change its shade. You can read about built-in kitchen appliances.

It is better to open façade elements with varnish in non-residential premises– undried coating is very toxic.

Stages of work:

1. Preparation of varnished surfaces. Just as with painting, the fittings are removed from the facade elements, the glass inserts are sealed with tape;
2. Removing the old varnish layer. To do this, use fine-grained sandpaper. The surface of the wood is sanded to complete removal remnants of the old coating. The wood-chemical dust generated during the process can be easily removed with a vacuum cleaner. After removing dust, the surface is thoroughly wiped with a damp flannel or sponge and dried thoroughly.
3. Applying primer. We make sure that the primer composition is evenly distributed over the surface to be treated. Let the primer dry completely.
4. Varnishing in several layers using a brush. To maximize the natural beauty of wood, everyone top layer make it thinner than the bottom one.

Mahogany furniture can be updated by covering the facade elements with three to four layers of stain. This will give it a solid retro look. The stain is applied in the same way as varnish, on a previously cleaned and sanded surface.

How to update kitchen furniture

Restoration of the facade of the kitchen unit is only part of the work to revive it beautiful view. But it’s quite possible to restore other elements of the set with your own hands: the tabletop.

Do-it-yourself chair repairs

Types of work that can be done at home include:

• renewal of varnish;
• seat reupholstery.

How to apply paint coating, described above - the mechanism for varnishing chair parts is no different from working with facade elements. Let's look at how to replace seat upholstery:

• The seat is dismantled, the old fabric and upholstery are removed. Try not to damage wooden base- it will still serve.
• A pattern for the future seat is made from thick cardboard. Place the plywood base on the cardboard and trace it with a pencil, allowing for 3 cm allowances.
• Using a template, cut out a blank for a new seat from foam rubber or batting. Next, using the same pattern, we cut out the fabric base of the new seat. On each side you need to leave at least 12 cm for hem. If the fabric is not plain, it is important to monitor the location of the pattern or ornament on it. The image must be located strictly in the center of the fabric base.
• Glue the foam blank to the plywood base using regular superglue.
• The fabric is attached using a staple gun or a construction gun. First on flat surface The fabric blank is spread face down, then plywood is applied to it, the side to which the foam rubber was attached should be at the bottom. Stretch the fabric around the entire perimeter or circumference of the chair and secure with staples. Try not to have large folds between the staples.

If old upholstery the chair is not leaky and still retains its density, you can stretch the fabric directly over it. You can restore a worn one in the same way.

Kitchen countertop

The countertop is one of the most vulnerable places in a kitchen set, because it is located in the work area. That is why or other materials are lost presentable appearance before other pieces of furniture. There are several ways to simple and not particularly expensive tabletop restoration:

• coloring;
• opening with varnish;
• decoupage;
• finishing with ceramic tiles.

The first three methods have already been described above. Finishing with tiles involves gluing the tile to the surface (it is better if it matches the finish in color and texture kitchen apron) using tile adhesive. The final stage of installation is grouting the joints. You can read about wall decoration in the kitchen by clicking here.

Tile adhesive dries very quickly, so do not spread it over the entire surface of the countertop at once. Apply glue to new area after placing the tile on top of the previous one. You can choose original skirting boards for the tabletop

Kitchen table

The table top, just like the kitchen worktop of the work area, loses its presentable appearance before the other elements of the set. Various restoration methods are suitable for updating it, the schemes of which were described above:

• for tables made of natural wood – painting and varnishing;
• for fiberboard tables - painting, varnishing, vinyl wrapping, decoupage, tile gluing.

And finally, one more master class on how to restore kitchen furniture:

A comprehensive restoration of a kitchen set, from replacing (changing) fittings to reupholstering chair seats, will cost several times less than purchasing a new set. If you do, the design will be completely unique.

When the time comes to do the next renovation, it may turn out that the former beloved and comfortable headset does not suit the style, color or has long gone out of fashion. What to do if its body is still strong, but you can’t find anything suitable in stores and furniture stores? There is a way out. You can always update your kitchen furniture with your own hands, creating the set that you like.

In order to understand what can be replaced by spending a minimum amount, let’s consider what elements the kitchen furniture consists of.

• Frame. This is a frame made of chipboard or MDF. In some cases, a frame made of timber is used, onto which filling parts are sewn.
• Facades. Front parts of drawers, doors, blind panels covering the voids between the wall and furniture.
• Boxes. They have a variety of shapes and sizes. Depending on the guides, they move out completely or by 70-80%.
• Shelves. They can be open or closed behind the front doors.
• Pull-out mechanisms for hard-to-reach places. This various designs, allowing you to easily organize access to the most inconvenient places, expanding the storage volume of things.
• Tabletop.

So what can you do?

Frame

Restoring or replacing a body is not an easy task and is quite expensive. At the same time, with skillful hands, there are no unsolvable problems.

In the case where the body is assembled exclusively from sheet material, restoration may be required from time to time to replace elements damaged by steam, moisture or mechanical stress. To do this, just cut it out of a sheet MDF new part and attach it in place. If necessary, a self-adhesive film with a suitable pattern can disguise new element, giving it the necessary texture.

For a built-in set with a frame made of timber, replacement or restoration of the sheathing may sometimes be required. With a radical remodel, you can add or subtract cargo, drawers, and shelves.

To ensure that the housewife always has full control over the stored items, it is advisable to provide the ability to change the height of the shelves. To do this, holes are drilled in the side walls at a certain interval. Provide the opportunity to add an additional shelf if necessary.

Facades

When replacing or restoring facades, designers have complete freedom of action.

• Replacing old facades with new ones. Justified when the old parts have really served their purpose, or there is no desire to waste time on restoration or alteration. As a rule, furniture showrooms offer facades standard sizes, suitable for factory headsets. Unified parts are interchangeable.

• Painting. Used for expensive furniture, when purchasing a new facade is more expensive than a trip to a paint shop. The advantage of this method is that you can invite an artist who can turn a boring set into a work of art. If you have a large-format photo printing service in your city, feel free to choose the image you like. At the same time, remember that the presence of perspective can visually push apart walls and blur the boundaries between reality and illusion.

• Pasting with film. Carefully done work will refresh the appearance of your headset and extend its service life for several more years.

Drawers and shelves

The convenience of kitchen furniture is how comfortable it is to store items in it, take them out and put them back, and maintain order in the kitchen. Telescopic guides for pull-out shelves is a revolution in kitchen ergonomics. Because now you have no “gray areas” where it is difficult to reach, where forgotten items have been stored for years.

Install heavy-duty slides that can fully extend shelves and drawers, so you'll always have full control of all your supplies and kitchen utensils.

The space between shelves and drawers is often used irrationally. In this case, it is worth adding an internal drawer/shelf without adding a new front. Beneath the standard appearance of the headset there can be a modern, highly functional storage system.

Tabletop

Combine the mosaic of cabinets into one whole using single table top. In this case, when removing or adding lower cabinets, the headsets will maintain unity. In what cases is this true? For example, when installing built-in equipment. For washing machine You can free up space by removing a cabinet that fits the width. A work surface it won't hurt at all.

Pull-out elements for hard-to-reach places

Tall cabinets, pencil cases and corner elements headsets are usually quite difficult to keep in order. Special devices allow you to organize storage so that order in the kitchen is easy to restore and maintain.

Don't rush to spend money on a new headset. Take a closer look, it may be enough to change the handles on the facades, replace the guides on the drawers and add functionality to the corner elements.

And finally, an interesting video:

May 23, 2016 Werri

If the kitchen set has lost its original appearance, there is no need to change it. There are many ways to update it and secrets that will help not only refresh the furniture, but also literally give it a second life.

How to choose an update method?

Before you begin any active actions, you need to choose suitable way updates. Please keep the following important points in mind:

• Condition of the furniture. Examine the item carefully. If it looks more or less decent, then radical measures will not be required. Enough with the minor changes. If there is significant damage, then cosmetic repairs there won't be enough.
• Your wishes and preferences. For example, if you just want to freshen up and decorate an old set a little, then this will probably be easy. If you plan to change the furniture beyond recognition, you will have to work a little.
• What resources do you have at your disposal? If the budget is limited, then you will have to take this into account when choosing the materials used. If you are willing to spend money, you can afford something original and expensive.

Let's start updating

So, how can you update your kitchen set yourself? There are several ways, and each of them is worth dwelling on in more detail.

Façade renovation

There are several ways to update the facades of an old set:

• The simplest, most effective and affordable way updating old furniture means using self-adhesive film. To make the item more attractive, take the film itself, scissors, a ruler, alcohol, and a rubber roller or plastic spatula. First prepare the surface. If necessary, treat it with sandpaper, then degrease with alcohol. Next, take measurements and transfer them to film. Now cut out the parts and gradually glue them to the facades. Be careful and attentive to get a perfect surface. As you stick, remove air bubbles from under the film with a plastic spatula or rubber roller.
• Painting. Furniture made from any materials can be painted. Looking to freshen up and brighten up your kitchen? Then choose a rich shade. Want something unusual? Mix several tones or combine them. You can also create creative images; you don’t need to know how to draw.
• Varnishing. A wooden piece of furniture can be varnished to give it an attractive and well-groomed appearance. If the surface is painted, you must first remove the old coating. Next, level the facades using fine-grained sandpaper. Next, coat the piece of furniture with a special primer that will prepare and strengthen the wood. Now you can proceed to applying varnish.
• Planks and moldings. Such details will make the set more stylish, especially if you choose a bright and contrasting color. You can glue moldings using super-resistant furniture glue or universal glue. As for the mounting location, you can place convex parts along the edge or in the center of the facade in the form of some kind of geometric figure.
• Rattan will look especially harmonious on wooden furniture. And working with it at home is quite easy, because it is attached using a stapler (the staples are covered with frames, for example, the same moldings).

Replacement of facades

Replacing facades is an extreme measure, but in fact the process is not as complicated as it might seem at first glance, especially if the set is not very old and is also modular.

Facades can be made of different materials, but the most practical and affordable is MDF. Modern panels have a variety of textures and colors, which will allow you to not only update a piece of furniture, but also completely change it.

For the work you will need a drill, new fittings, MDF panels, a screwdriver and screws. First, remove the old doors and replace them with new ones, not forgetting to install hinges and handles. The body does not need to be changed, but just pasted over with panels (you can also secure them on the sides using self-tapping screws).

Replacement of accessories

Replacing handles will help transform furniture inexpensively and quickly and make it more modern and stylish. Go to specialty store and purchase new fittings. If it is unusual and bright, then this will only benefit the set and the entire kitchen design as a whole.

Interesting techniques

To give your headset originality and change its appearance, you can use interesting techniques decor. Here are the two most common and popular:

• Decoupage. This method involves transferring an image to the surface of the facade. To decorate the set you will need: the image itself (this could be an interesting paper napkin, a piece of wallpaper, a postcard, a black and white or color photo or something else), sandpaper (fine-grained), alcohol or acetone, a rag, special glue for decoupage, a brush and sponge, a transparent primer or clear varnish, sealant or putty for repair damage, as well as water. First you need to prepare the surface. Remove the old coating, seal all cracks and scratches with putty or sealant, and also treat the piece of furniture with sandpaper and degrease it using acetone or alcohol. Now apply decoupage glue with a brush. Moisten the material with the image in water and apply it to the surface. Gently blot it with a sponge. Cover the entire set in this way and leave it to dry for a day. Next, cover the entire surface with acrylic varnish or primer in several layers (each should dry for an hour). Ready!
• The craquelure technique will allow you to create cracks on the headset and turn it into an antique, as if aged. To achieve this, prepare: paint, a brush and a special craquelure varnish. First, you need to completely remove the old coating from the piece of furniture. It is also advisable to level the surface using sandpaper. Next, apply one coat of paint. You should only use matte, as glossy will not allow you to achieve an aging effect and get noticeable cracks. After the paint has completely dried, apply craquelure varnish. It is better to do this in several layers (each previous one must dry before applying the next one), then the cracks will be deeper. Now apply the final finishing coat of paint. The strokes must be careful; you cannot brush over the same place twice.

You can decorate an old set in different ways.

Interesting ideas:

Vinyl stickers. They are very popular and allow you to create bright volumetric images on almost any surface, including furniture. To make the design bright, choose a contrasting color that will stand out against the background of the façade of the set.

Artificial flowers or, for example, insects. Simply glue them to the surface of a piece of furniture.

Mosaic. You can make it from small pieces of glass or old ceramic tiles. First, assemble the design on the table or floor, then treat the facade of the headset with universal durable glue, and then transfer the image onto it. It will look very original.

Decorative stones or sea pebbles. They can also be attached using universal durable adhesive.

Choose the appropriate decoration method and enjoy your transformed kitchen set.

Long-term use of the kitchen sooner or later makes itself felt: no matter how high-quality the set is, over time it loses its seasoned appearance. And then you have to choose: buy a new set or update the kitchen with minimal costs. Many people opt for the second option, namely updating the facades using a special film.

Kitchen before:

Kitchen in intermediate state: buy new or update facades?

On the right you can see traces of glue - the consequences of an attempt to repair the set.

Options for "new things"

Since the set itself is not yet falling apart, it is necessary to update the facades. This will benefit both appearance, and will protect the material from moisture. There are two options for updating facades:

1. Ready-made self-adhesive film
2. Individual photo printing on adhesive paper

The owner of this kitchen settled on the second option, after which he indulged in thinking about the topic of photo printing. The original version with a separate picture for each door was rejected: general view it will turn out too motley. After some more thought, it was decided to choose a print with nature, “breaking” it with an apron would not affect the perception of the picture.

When searching for a suitable print, the picture should be selected with the maximum resolution - only in this case it will not be blurry.

Let's get started

The kitchen owner took advantage of it quite simple method: I searched for pictures using the word “nature” with a resolution of at least 40 megapixels.

This option turned out to be the most suitable, but with minor amendments: it was decided to remove the huge butterfly. This is roughly what the print should have looked like in the kitchen.

A sketch was made in a photo editing program to visually understand what would be lost from the drawing. The butterfly has been replaced with grass.

With this picture you can safely go to advertising agency. The print was chosen with lamination so that after updating the facades they could be washed.

It is necessary to print in a slightly enlarged size so that you can paste over the ends and wrap the film inside.

After this, you can proceed directly to pasting the facades:

1. Knowing the dimensions of the door, you need to add 1-2 cm on each side for the ends and another 1-2 cm on the turn.
2. Cut the image to the required size.
3. We degrease the door and remove all irregularities.
4. Carefully glue and smooth.
5. We make holes for the handles and install them.

Use a hairdryer as in the case of car film it is forbidden: the film is deformed.

The most difficult part is the corners of the door. You can paste them in two ways, it’s a matter of taste:

1. Butt-butt
2. overlap

Corners should be pasted over with the utmost care, because self-adhesive film will not stick to superglue.

During the renovation of the kitchen, it was decided to unload the shelf for drying plates from the lids that had accumulated there by hanging them on the back of the doors. To do this, you need to purchase regular hooks and secure them in any convenient way.

To prevent the screws from being visible under the film, the holes for their installation must first be countersinked, i.e. make holes for recessing them.

The final stage of updating the headset was the doors under hob, which were not originally there. The doors were made of 5 mm. plywood. If you really want, you can assemble the entire set of plywood with your own hands.

Defects in the pasting can be removed with a blade, but to do this you need to wait 1-2 weeks: then the film will finally take its place.

The refrigerator can be the heaviest item to cover. Get ready for the fact that the film will have to be removed and pasted repeatedly, fortunately, it allows this. Getting rid of small bubbles is very problematic, so it is better to expel excess air after completing the process using a needle.

Conclusions and prices

Several conclusions based on the results of the façade renovation:

• The film can be washed and rubbed.
• It holds up very well and is very difficult to remove.
• Door corners are the weakest points.
• The film is easily scratched.

The costs for such a kitchen renovation were as follows: about $120 for a self-adhesive print with lamination and about $90 for plywood, hooks and handles. When purchasing regular film, the budget can be reduced significantly.

Photo

Now we invite you to look at a few more photos with updating the facades of the headset at minimal cost.

Video

If you decide to update your kitchen using self-adhesive stickers, don’t be too lazy to watch a video on how to apply it. This way you will save both time and nerves.

Photo: vk.com, yaplakal.com, liveinternet.ru