No matter how expensive and high-quality your plumbing is, nothing will make it shine clean forever without proper care. When it comes to toilets, the main problem they suffer from is urinary stone. The same yellowness that you can see under the rim and inside the toilet. And if the situation is further aggravated by the lack of regular cleaning and disinfection, the problem will soon appear in all its glory. You will learn how to clean the toilet lid from yellowness in this article.

Why does the toilet lid turn yellow?

Human urine has a special composition - certain minerals, which subsequently form urinary stones. If there is urine residue on the surface, plaque accumulates and builds up on the walls of the toilet. It consists precisely of urinary stone. This plaque builds up over time, and the longer it is not removed, the more difficult it will be to clean. However, there are certain tips on how to clean the toilet lid, and the toilet itself, from yellowness.

Important! Plaque usually covers not only the seat, but also the bowl itself, especially inside. There are several reasons for this, and each of them must be dealt with in its own way. Find out:

How to keep the toilet clean?

Having figured out where the yellow plaque on the toilet comes from, it’s time to find out how to deal with it. The most in a simple way To prevent the formation of urinary stones is regular cleaning, because it is always easier to carry out regular maintenance and keep the plumbing clean than to make efforts to remove old contaminants.

You can keep your toilet clean and white in the following ways:

• flush water regularly cistern, after each visit to the toilet;
• delete daily toilet paper or use a damp cloth to remove splashes and drops from the toilet lid;
• Once every few days, apply a toilet cleaner to the surface of the toilet to prevent the appearance of plaque;
• you can use special cassettes that are attached to the toilet, under the lid, and every time you press the flush button, water enters the toilet along with special remedy, which fights the formation of dirt and also has a pleasant aroma.

Following these simple rules, you are unlikely to encounter the problem of a strong yellow coating. And if you also read the article via the link with rating household chemicals, then all your problems with further choice.

How to remove not too old plaque?

If you always try to keep your toilet clean, according to the recommendations above, then the maximum that awaits you is to occasionally remove the yellowness from the toilet seat and its surface. Let's look at all the possible means that do an excellent job with this.

Table vinegar

Cleaning is done as follows:

• In a saucepan or any container convenient for you, heat about one glass of vinegar until warm.

Important! If you have a food thermometer, the temperature of the vinegar should be 40 degrees Celsius. The liquid should feel warm, but not hot.

• Pour the heated vinegar into the toilet bowl and add two teaspoons of baking soda there.
• Leave to stand overnight.
• In the morning, it will be enough to just flush the toilet with a brush and drain the water.

Important! The melamine sponge copes well with any dirt.

If you only need to wash the toilet lid from yellowness, then you need to:

1. In a small container, mix warm vinegar and baking soda.
2. Wearing rubber gloves, quickly apply this mixture with a sponge.
3. Leave for 15-20 minutes and then rinse with a clean sponge.

Citric acid

Another remedy for removing old plaque is citric acid.

Important! It removes not only urinary stones, but also calcium deposits that build up on the walls of the toilet due to the fact that the water in the taps is too hard.

This procedure is incredibly simple and convenient. All you need to do is pour a couple of citric acid packets into the toilet and leave it all to react overnight. After it passes chemical reaction— you just need to clean the toilet with a brush and drain the water.

Important! Cleaning procedures using vinegar or citric acid are best done after draining the water. To do this, you can use a plunger.

How to get rid of old plaque?

It happens that you get a toilet in a fairly neglected state. No store-bought products in tandem with a brush can cope with existing stains. Then it is necessary to connect heavy artillery.

Household chemicals containing acid

The easiest way to clean a toilet from old plaque is to use household chemicals available on the market. IN in this case It is necessary to pay attention to those products when working with which you need to use a protective mask. Only they are able to cope with strong and old pollution.

Important! The most effective products will be those containing formic or sulfuric acid.

Coca-Cola

No matter how funny and strange it may sound, housewives have repeatedly tested and proven that Coca-Cola can cope with many contaminants. Cleaning the toilet was no exception.

In order to clean the accumulated plaque and deposits, you just need to pour a bottle of the drink into the toilet and leave it to stand for several hours. After this, work a little with a brush and drain the water.

Oxalic acid

Oxalic acid is a crystalline powder. You need to work with it exclusively in thick rubber gloves. It is applied with a sponge to the toilet lid and under the rim. For ease of application, use a damp sponge.

If there is heavy dirt at the bottom of the toilet, pour powder inside. Wash off after a few hours.

Important! This method also works well to clean the toilet seat.

Electrolyte

The most powerful, but at the same time, the most difficult to use toilet cleaner. The difficulty lies in the strong toxicity of the electrolyte. With it you need to provide yourself with maximum protection. In addition to thick rubber gloves, you should wear a protective mask, your body should be hidden as much as possible under thick clothing, and it would be a good idea to wear goggles to protect your eyes.

Since the electrolyte is a liquid, you just need to pour it into the toilet, doing this very carefully, avoiding splashing. After 15 minutes you can drain the water.

White

If you want to achieve maximum whiteness of the toilet, then this product will do the job perfectly. “Whiteness” just needs to be poured into the toilet bowl and left there, flushed after a few hours.

Important! All of the above products will be even more effective if you pour or pour them into a toilet bowl that has previously been emptied of water using a plunger.

After leaving the toilet with the cleaner overnight, it will be good if you remove the deposits in the morning using a wooden spatula or a construction spatula. Such option will do with very large stone deposits. The stone will become wet under the influence of chemicals and will easily come off in pieces from the surface.

What to do if the plastic cover turns yellow?

It happens that over time the plastic on the lid turns yellow. To whiten the toilet lid from yellowness, it is best to remove it first, if the design of the toilet allows it. If this cannot be done, apply all the products described below with a sponge and leave for a while. If you still managed to remove the lid, then clean it by soaking.

Shared

Snow-white, shining with cleanliness, like in a picture from a glossy magazine, the toilet is the dream of every housewife. We know firsthand how quickly this place gets polluted. public use. Yellow or black spots, heavy dirt and bad smell. How to clean it inside and out? All problems and ways to solve them will be discussed in our article.

All cleaning products can be divided into folk and professional ones. At a time when there was no abundance of household chemicals, our grandmothers used available means, many of which are now found in well-known branded cleaning products. It also happens, on the contrary, that a professional product that has a different purpose suddenly turns out to have good cleaning properties and is immediately adopted by enterprising housewives as a cleaning product.

Let's consider the most effective and popular means.

Folk remedies for cleaning the toilet from heavy dirt

Recently, many housewives are returning to old, proven over the years, folk remedies. Their main advantage is accessibility and environmental safety. Most often, such products are found in every home. But, even if they are not available, you can purchase them at your nearest store for little money.

Baking or soda ash

Has cleaning and disinfecting properties. Absorbs unpleasant odors. In addition to cleaning the surface of the toilet, it helps eliminate operational blockages in the water seal and sewer pipes. An effective product for regular cleaning and prevention.

Mustard powder

Dry mustard copes well with grease deposits on the surface of the toilet bowl, eliminating yellowness and dirt. Effectively used to clean the bowl and prevent blockages in the water seal and pipes.

Salt

An effective remedy for eliminating yellow plaque and unpleasant odors. Removes fat deposits on inner surface and in pipes. You can use a combination of salt and soda to clean and prevent blockages. A mixture of salt and turpentine, diluted to a paste consistency, removes rust well.

Vinegar

Excellent detergent and antibacterial agent. To clean and remove yellow deposits, it is better to use undiluted vinegar. Vinegar essence will help deal with severe stains.

Apply vinegar to the inside surface. It is best to do this in the evening, before bed.

Leave it overnight.

In the morning, use a brush to clean off any remaining yellow residue.

Flush the toilet.

Vinegar works well when combined with baking soda and salt.

Mix one glass each of salt and baking soda.

Apply the resulting powder to the inner surface.

Sprinkle vinegar on top. The most convenient way to do this is with a spray bottle.

Leave for half an hour. The baking soda mixed with vinegar will begin to sizzle. Some of the contaminants will be removed during this reaction.

Clean off any remaining dirt with a brush.

Rinse.

Citric acid or juice

It copes well with limescale and has antibacterial properties. Effectively removes blackness on the surface of the toilet bowl and prevents it reappearance. A solution of citric acid can be made at the rate of 1 tablespoon of acid per 1 liter of water. For severe stains, you can use a more concentrated solution.

In some especially difficult cases It is advisable to rub the stain with a slice of lemon, leave for a few minutes, and then rinse with water.

Lemon juice also perfectly freshens the air in a room, in no way inferior to professional air fresheners. But at the same time it is a natural and environmentally friendly product.

Coca-Cola

This product will surprise those who do not yet know about the excellent cleaning properties of this drink. But, that's true. Carbonated drinks Coca-Cola, Pepsi-Cola, Fanta, Sprite effectively clean limescale on the surface.

Apply a small amount of Coca-Cola or other drink to the dirty surface.

Clean the dirt with a brush.

Flush the toilet.

All the described means do not change the structure and color of the material from which plumbing fixtures are made. And therefore suitable for both white and colored toilets.

Professional products for effective toilet cleaning

The advertising-filled airwaves and the abundance of household chemicals on store shelves have made professional cleaning products very popular. After all, as the brochures say, all you have to do is buy, apply, and the result is guaranteed. True, the funds do not always meet the stated requirements, but one cannot help but admit that an undeniable advantage Professional tools are simple and easy to use.

If you decide to use professional household chemicals for cleaning, carefully read the instructions for use. The products may only be used as described in the instructions. You cannot mix or use different products at the same time. IN best case scenario A neutralization reaction may occur and no remedy will work. At worst, the consequences will be unpredictable. Please pay attention to safety requirements. As a rule, you need to wear rubber gloves when working with professional products. In some cases, a protective mask or respirator is required.

Table: Review of household chemicals for cleaning toilets

Video: Toilet cleaning products

How to clean a toilet

Cleaning the toilet can hardly be called a pleasant event. However, this must be done regularly to maintain cleanliness at all times.

Be sure to follow safety precautions while working.

Use long, durable rubber gloves. They will protect the skin from unwanted contact with chemicals and the treated surface.

Provide good ventilation toilet room. The fumes released by chemicals not only have an unpleasant odor, but also cause great harm to health.

If necessary, use a protective mask or respirator.

How to clean the lid and seat

For hygienic cleaning, use mild detergents. Treatment should be carried out with a household sponge or cloth. Do not use abrasives or hard brushes, which can damage top layer surfaces and will ruin the appearance of the headset.

Vinegar and baking soda can be used effectively to remove yellow stains and urinary stones. And you can also use professional cleaning products, for example, CILLIT or Domestos.

Place baking soda on a napkin and apply evenly to stains.

Apply a second layer of vinegar.

Leave for half an hour or longer.

Wipe away dirt with a cloth.

Rinse off the product with clean water.

How to clean the bowl and the area under the rim from yellow plaque

Of the professional products, Toilet Duck is well suited for these purposes. It has a convenient packaging with a curved spout and cleans dirt well.

Apply the product evenly to the surface, starting from the area under the rim. This is the area that is most susceptible to contamination.

Close the lid and leave for half an hour.

Clean with a brush or the hard side of a household sponge. For the area under the rim, it is convenient to use a special brush with a curved handle.

Drain the tank while continuing to scrub the surface to remove any remaining cleaning product.

For general cleaning, treat outer part soap solution and then rinse with water.

You can effectively remove yellow plaque using vinegar and soda. Coca-Cola will also cope well with this task. Methods of application are described above.

How to clean the drain hole from heavy dirt

Most effective means Baking soda, salt and mustard are used to remove contaminants in the drain hole. You can use either one of these products or a mixture in any proportion.

Pour one glass of product into drain hole and stir well with a brush.

Leave for several hours. This is convenient to do in the evening before going to bed or in the morning before leaving for work.

Clean the dirt with a brush or stiff brush.

Rinse.

Diluting the cleaning agent in the drain water makes the method less effective for very heavy stains. If the contamination remains, to remove it you will need to remove the water and repeat the cleaning procedure.

How to remove water from a toilet

Drain all water from the tank.

Using a small container, scoop the water from the drain hole into a bucket. You can use a cap from a cleaning product package as a container.

Remove remaining water that is difficult to remove with a cap using a sponge.

How to remove sand from the bottom

Sometimes sand accumulates at the bottom of the toilet. It can be removed without scooping water from the drain hole.

Using a brush, stir the sand into the water.

Quickly, without allowing it to settle, drain the water from the tank.

The water in the drain hole will be renewed. Some of the sand will go down the drain.

Repeat the procedure several times.

How to clean the drain hole from blackness

The blackness on the surface is caused by black mold bacteria. The mold itself is easily removed; you just need to wipe the surface with a sponge or cloth. But after a while she appears again. For complete removal blacks, you can effectively use citric acid or a professional product with disinfectant properties, for example, Domestos.

Use a brush, brush or cloth to remove black deposits from the surface of the toilet bowl.

Rinse thoroughly by draining the tank.

Pour 1-2 sachets of citric acid into the drain hole.

Leave the product on for several hours.

Clean the surface again.

Rinse.

How to clean a toilet flush tank

Due to constant contact with water, limescale deposits form on the inner surface of the drain tank. You can remove it using the method described above using baking soda and vinegar or professional cleaning products.

Shut off the water supply to the drain tank.

Drain the tank.

Treat the inside of the tank and the drain mechanism with a cleaning agent.

Leave it for a while.

Clean off dirt with the hard side of a household sponge.

Open the water supply valve to the drain tank.

Fill the tank with water and flush it 2-3 times.

Video: How to clean a toilet flush tank

How to clean a toilet brush: a simple and effective way

Let's consider a method of cleaning the brush together with the toilet, that is, without making separate efforts to clean the brush.

Clean the inside of the toilet with a cleaner. For example, you can use Domestos.

Leave for 15 minutes.

Clean the toilet with a brush.

Without draining the water or rinsing off the cleaning agent, place the brush into the toilet drain hole.

Leave for several hours.

Clean the surface of the toilet bowl again with a brush.

Wash the toilet and brush by draining the water from the tank.

Video: How to clean a toilet correctly

Prevention

To keep the toilet clean long time, it is important to carry out preventive measures and follow basic rules:

Use the toilet as intended. Do not pour food or household waste into it; there are special containers for this. For example, poured borscht will create a greasy deposit on the surface and speed up the clogging of the water seal and sewer pipes.

Flush the toilet after each use. You shouldn’t accumulate in the toilet what your body has gotten rid of.

Using a brush, clean the surface of the toilet bowl from adhering waste immediately, without allowing it to dry.

If the seat is splashed during use, immediately clean it up. It is better to use damp bactericidal wipes for this.

Treat the surface with a cleaning product at least once a week.

Make it a rule to flush it down the toilet once a month. hot water. This will reduce fat deposits on the surface and prevent operational blockages in the toilet and pipes.

If water is constantly flowing in the toilet, adjust the float in the flush tank or make repairs. This will reduce mineral deposits on the surface of the toilet.

Secure a container with special tablets or stickers under the toilet rim to soften water, disinfect and eliminate unpleasant odors.

Use the means and methods described in the article to regularly clean the toilet and prevent contamination, and you will not have to change the plumbing, and your “white friend” will gratefully shine with cleanliness.

Do you want to know how to remove old grease from a frying pan or clean a saucepan, kettle, oven rack and other kitchen utensils? To do this you will need salt, soda, citric acid, etc. I successfully use them and am ready to tell you how to do it correctly.

Methods for cleaning grease from dishes

To wash old fat from the dishes, not always enough detergent, and aggressive powders and liquids can damage the surface. Cleaning dishes at home using traditional methods not only effective, but also safe, because home remedies will not cause allergies or harm your health. So I'll tell you about best methods cleaning dishes with your own hands using home remedies.

Method 1: Soda and citric acid

Take 1-2 tablespoons of baking soda and citric acid and mix them in a container. Moisten the dish to be cleaned with water and pour the mixture into it. Soda and acid will react with water and, after a while, the fat will form lumps. All that remains is to wipe it off.

Method 2: Salt and Vinegar

To delete old fat, pour 2 tablespoons of soda into the bottom of the frying pan and add 2 tablespoons of 9% vinegar. The mixture should cover the bottom, so if the resulting solution is not enough, increase the amount of ingredients proportionally.

A soda-vinegar solution is suitable for dishes with thick walls and a durable coating. To wash more fragile kitchen utensils, such as glass or plastic dishes, it is better not to use this method.

Method 3: Soda with vinegar

You can wash dishes from old grease in a more gentle way - use a paste of soda and vinegar. These two products must be mixed together in equal proportions. Apply the resulting mixture to oily areas and leave for 15-20 minutes.

A paste of baking soda and vinegar will soften the fat.

Method 4: Mustard powder

Mustard is an excellent remedy for grease and soot, which was used decades ago. It is safe even for children and is suitable for cleaning stains of any complexity. To clean the frying pan from old fat, heat it on the stove.

Before cleaning, allow the utensils to cool slightly to make them easier to clean. Sprinkle a little mustard powder on top (on average, 1-2 tablespoons is enough). Then wipe the surface with a slightly damp sponge and leave the mustard mixture in the frying pan for 15-20 minutes. Grease stains will soften and will be easier to remove from the surface when cleaning.

The resulting paste will act as a cleanser. Using a brush or sponge, thoroughly clean the surface of the dishes, then rinse them cold water. This method will help clean pans and pots, as well as wash glassware for the oven.

There is another way to wash greasy dishes using mustard powder. To do this, we need a large basin to accommodate the dishes. Fill a bowl with water and dissolve 1-3 tablespoons of mustard there, dip the dish into the solution and leave for 30-40 minutes. Then the dishes need to be washed in the usual way.

Before soaking dishes in mustard solution, they should be washed thoroughly. You can even metal sponge, if the surface allows. This will dissolve the fat faster.

Cleaning grease from cast iron cookware

How to clean a frying pan from old fat if it is made of cast iron? I offer you a simple recipe using cheap ingredients, their price is affordable for everyone.

For cast iron products I offer you a simple recipe that includes the following ingredients:

• piece laundry soap;
• packaging of PVA glue;
• a glass of soda;
• a heat-resistant container that will hold soiled utensils.

Instructions:

Image	Procedure
	Step 1 Grate the laundry soap.
	Step 2 Pour water into a bowl and bring it to a boil.
	Step 3 Pour soap shavings into the water. Soda and glue for cleaning dishes are also sent there. It is better to keep the fire minimal.
	Step 4 Stir the mixture until the soap is completely dissolved.
	Step 5 Dip a frying pan into the solution and boil it for at least 2 hours. If necessary, add water. When the fat becomes soft, it can be cleaned off with a metal or regular sponge.

Cleaning the barbecue grate

If you don't know how to clean a barbecue grate without using household chemicals, try a few simple home methods:

1. Coca-Cola. Feel free to pour this carbonated drink onto the grill. After a few minutes, the surface must be thoroughly wiped. The fat will wash off easily and quickly.

1. Liquid soap. Lubricate the grill with liquid soap, wrap it in a bag or cling film and leave it like this overnight. The next day, wash the product with a washcloth or brush. Brilliant results are guaranteed.

1. Soaking in hot water. If the layer of fat is not very old, you can simply soak the grate overnight in a bowl or sink filled with hot water. After that, the grease from the dishes is wiped off with the hard side of the washcloth.

Getting rid of fat on the kettle

Grease often gets on the kettle when cooking on the stove. It is not always possible to wash stains with regular detergent. I know several folk methods. So, how to clean the kettle from grease:

1. Baking soda. Wet the kettle and pour a little baking soda onto a damp sponge. Run the hard side over the surface of the dish and grease stains will be easily removed.

1. Toothpaste. If the stains are not very dry, you can use more mild remedy. Toothpaste will help clean the surface until it shines.

1. A mixture of baking soda, salt and vinegar. If, on the contrary, the stains are very old, you can try a more powerful solution. Mix salt, soda and vinegar 9% in equal proportions. Using this mixture and a sponge, clean the entire surface of the kettle.

Safety rules

Despite the fact that all recipes are prepared at home from safe ingredients, you need to know some rules. Take note of these tips:

1. Ventilation. If you are heating dishes with the prepared cleaning mixture on the stove, it is better to open the windows in the kitchen.

1. Hand protection. Any procedures should be carried out with rubber gloves. Even such safe home remedies as mustard powder, salt and citric acid can harm the skin of the hands, and a concentrated vinegar solution often leaves redness and peeling on the hands.

1. New sponge. For best result I recommend using new sponge. And after cleaning the dishes, it is better to throw them away.

Conclusion

I talked about the most effective ways cleansing kitchen utensils which I personally used - the result exceeded expectations. All you have to do is try one of them. You can write your secrets on how to wash dishes from grease in the comments. Additional instructions are provided in the video in this article.

Despite the fact that plastic is considered a fairly unpretentious material in everyday life, when cleaning you should not use products containing coarse abrasive particles or alkaline substances, as well as hard sponges, sponges and metal brushes.

These devices will only scratch the plastic surface, ruin the appearance of the product and give free rein to bacteria, which will begin to accumulate in grooves and microcracks.

How to wash plastic dishes

To wash plastic dishes, you will need warm water, regular dishwashing detergent, or liquid soap. Remember, not all plastic is resistant to boiling water: if the water temperature exceeds 60-70°C, a “mesh” of cracks is likely to appear on plates, bowls and containers.

Products from heat-resistant plastic can be sent to dishwasher, but only if a special icon on the bottom of the vessel informs about this possibility.

Dishwasher safe symbol on plastic utensils

Remove dried food from plastic as follows: soak the dishes in warm water, adding a couple of drops of detergent. It only takes half an hour for the leftover food to go away.

What confuses housewives most is not grease (it just washes off the walls without any problems plastic dishes), but an unpleasant odor that eats into the surface. Try to get rid of the smell using one of the following methods:

1. Pour 1 cup into container warm water and ¼ cup of 9% table vinegar, a couple of drops of dishwashing detergent. Close the container with a lid, shake vigorously for a minute, and leave for an hour. Next, drain the water and rinse the dishes with cold water.
2. Has a similar effect baking soda. Dilute the soda warm water until it becomes a paste, apply the resulting mixture to the walls of a bowl, plate or ladle. Leave it overnight and rinse with cold water in the morning.
3. Coffee beans, wood or wood are considered good absorbents. activated carbon. Place 5-6 grains or “charcoal” tablets in a container, leave under tightly closed lid for two hours until the smell passes into the absorbent.
4. Rub the inside of the container with lemon juice (or just lemon peel), leave to ventilate for two to three hours. At the end of the procedure, rinse the dishes with water.
5. Vanillin will also help (do not confuse it with vanilla sugar). It is enough to fill the vessel with water and add one or two pinches of aromatic powder there, and “seal” tightly. After two to three hours, rinse the container.

How to wash a plastic barrel (tank or canister) from dirt and mold

Washing a plastic drinking canister or tank is a labor-intensive task, but among home remedies there are “helpers” that can cope with even such a difficult task. All methods combine the action of cleaning, disinfectants and mechanical cleaning.

Technology: pour one of the products suggested below into a tank or barrel, close the lid and shake well (twist or roll). The smallest particles will polish the container from the inside, and active substances destroy accumulated bacteria.

To make the process more efficient, fill the barrel not completely, but about a quarter. After cleaning, do not forget to rinse the container with cool water and dry naturally.

Cleaning products:

• Baking soda is a mild abrasive that also effectively fights microorganisms. For 1 liter of water, 2 teaspoons of powder is enough.
• As an alternative to soda, use clean (calcined) sand, sawdust, coffee grounds, millet (at the rate of 200-300 grams per 10 liters of water). For added effect, add a few drops of dishwashing liquid.
• A saturated (bright pink) solution of potassium permanganate not only disinfects the surface, but also removes the pronounced “swampy” smell.

Tanks, barrels, and canisters must be cleaned of accumulated dirt, sediment and mold (greens) at least once every 2-3 months.

Cleaning a plastic kettle from scale and dirt

9% table vinegar (1 tablespoon per 1 liter of water), citric acid (1 teaspoon per 1 liter of water), potato or apple peeling(a couple of medium potatoes or small apples per 1 liter of water is enough).

Method: pour water into the kettle, add the “active” agent, bring to a boil, and then let it brew for 30-60 minutes. Pour out the mixture, go over the inside of the kettle with a clean soft sponge and rinse the dishes well with cold water.

Cleaning other plastic products and furniture

Plastic combs require not only constant cleaning, but also disinfection. Citric acid can handle these tasks quite well. ammonia or table vinegar 9%

Prepare a soap solution, add 1 tbsp. spoon of product (per 1 liter). Soak the comb for an hour and then wash it plain water. A weak solution of potassium permanganate will also destroy bacteria: keep the comb in it for an hour.

To wash plastic products like children's toys (blocks, cars), soak them in a solution of laundry soap. Use a preliminary soak (for half an hour) and an old toothbrush - dirt in small recesses and joints will disappear without a trace. Once the procedure is completed, rinse the toys under running water and leave to dry naturally.

In a similar way, you can clean and plastic furniture. Just instead of soaking, thoroughly wipe the contaminated surface with a sponge soaked in soapy water, then rinse with water and dry with a clean rag.

The plumbing fixtures of our time are characterized by convenience, ergonomics and variety. appearance. But it all has one thing in common, namely the formation of urinary stones. These deposits cause housewives a lot of trouble, not to mention the fact that they create the appearance of neglect in the bathroom. How to deal with limescale and urolithiasis? This will be discussed in this publication.

Where does the problem come from?

The appearance of urinary and limescale deposits is inherent in any plumbing product that is used frequently and regularly. Both types of pollution do not form at one moment, but gradually, month after month.

Unsightly deposits are the result of improper use of the toilet, in particular, untimely flushing, defects in the ceramic or porcelain surface and insufficient hygienic cleaning.

The fact is that human urine has a specific mineral set, and if you do not train yourself to constantly drain it after yourself, then these very minerals form layers of urinary stones. Over time, they harden and are no longer easy to clean with a standard toilet brush.

A similar situation arises with lime deposits. But the speed and intensity of its formation depends not only on the above factors, but also on the quality composition of the water.

How to deal with common stains?

If cleaning the entire surface of the toilet is an essential part of weekly cleaning of the apartment, then eliminating urinary stones will not be particularly difficult.

In this case, you can use regular vinegar:

• First you need to pour a glass of vinegar into a separate container, cover it with a lid and heat the liquid to 40 degrees;
• Then it should be poured into the toilet, and either 2 tsp should be added there. baking soda, or a similar amount of iodine;
• Then the toilet is covered with a lid and left until the morning. The next day it will be enough to simply rinse it well with water.

The next “food” option for how to clean a toilet from urinary stones yourself is to use citric acid.

You need to deal with it as follows:

• Take a couple of packets of powder and pour them into the toilet;
• The plumbing lid slams shut all night;
• Then it will be enough to just go over the plaque with a brush and rinse the compact bowl thoroughly.

If necessary, the entire procedure can be repeated several times in a row, which is completely harmless to sanitary ware.

If all that has been done does not have the desired effect, then the problem can be eliminated using a specific cleaning agent:

• The cheapest option would be to use regular white. Before you pour a whole bottle of this liquid into the toilet, you need to completely empty it of water. This is done using vantose;
• Silit, Domestos or granular Mister Proper will be able to solve the problem of how to clean the toilet seat from a slight deposit of urinary stone. They will not cope with more complex deposits.

Whatever industrial product is chosen, it must act according to a single rule: the compact must be dried, chemicals are added to it, and the layers are acidified throughout the night (this is in the ideal case).

Then the dirt is carefully scraped off with a wooden or plastic spatula, and finally the sanitaryware is polished with a hard brush.

What to do with old plaque?

It also happens that an apartment purchased or donated has plumbing fixtures that are in a completely deplorable state. And until a new compact is purchased, you have to independently solve the problem of how to clean the toilet rim from the old urinary stone. What can you do?

Choose:

• Oxalic acid can clean sanitaryware in no time, but you need to work with it extremely carefully, observing the rules of personal protection. The powder is collected on a sponge and evenly distributed over the most contaminated areas of the ceramic, although it can simply be poured into a bowl and washed off after a couple of hours. All this is done with hands wearing rubberized gloves;
• You can get rid of old deposits using electrolyte - a liquid that is poured into batteries. When using it, you need to not only wear rubber gloves, but also a respirator, goggles and even overalls. All this is necessary to prevent poisoning from toxic and heavy fumes. By the way, the electrolyte should be poured very carefully, avoiding splashing, and washed off after 15 minutes;
• It may seem strange and even scary, but the next sure-fire option for how to clean a toilet lid from limestone or urinary stone is our all-loved Coca-Cola. Thanks to observations and experiments of people, it was found that this foreign drink perfectly destroys any deposits and contaminants formed on sanitary ware. To do this, simply pour it into a bowl and wash it off after 3-4 hours, remembering to use a brush.

Having decided to clean the lid or rim of your toilet using industrial household chemicals, you need to pay attention to its quality composition.