The facades of houses, finished with natural stone, attract a lot of people. This design looks beautiful and fits well with any landscape. But such a finish is not available to everyone, because the natural stone itself and work with it are very expensive.

But this is not the only obstacle to the use stone materials for home decoration. Often a house that has been in operation for a long time is simply not designed for additional loads. Stone is a heavy material, and the load on the foundation of the house in the case of facade cladding with it will increase significantly. Therefore, each project of such cladding requires verification. bearing capacity foundation and, possibly, its strengthening.

What to do for those who still want to decorate their house, turning it into a kind of small ancient castle? They come to the aid of modern facing materials in the form of facade panels stylized as a stone.

Facade panels "under the stone"

There are many options for such panels.

They are made from various materials:

• chipboard panels;
• cement chip;
• plastic panels;
• fiberglass products.

The most commonly used plastic products are now, which have good performance and quite affordable price.

These panels are available for both house wall cladding and plinth cladding.

The plinth is constantly in difficult operating conditions, as it is exposed to dampness, cold and other adverse natural factors. Therefore, he especially needs good protection. Due to increased work load plinth panels have a thickness 2-3 times greater than the same parameter wall panels. This allows them to perceive large mechanical effects without destruction.

Plinth panels differ from similar products for walls in a larger pattern natural stone, have a coarser texture. Most often they have a rich color and increased size.

All facade plastic panels are divided into 2 types:

• Single layer, made of PVC.
• Combined panels. These are products with extended functionality. They consist of two layers: the front, made of polymeric material, and the inner one, made of expanded polystyrene.

The latter perform not only the function of protecting the facade from adverse effects, but also replace the insulation.

Therefore, if the building needs to be insulated, then it is worth considering purchasing combined panels- then you do not have to separately deal with the insulation of the facade.

In addition to lightness, which does not create a load on the foundation of the building, plastic panels have other advantages.

Advantages of plastic panels "under the stone":

• The material resists well the mechanical loads that often occur during the operation of the house. Especially the plinth panels.
• The appearance of the building after facing is radically improved. This finish can be used even for the oldest facades and houses.
• Wide possibilities for facade design, due to the presence of products on the construction market various manufacturers. The only limitation: if you decide to finish both the walls and the plinth, then it is better to purchase panels from the same manufacturer - this will avoid annoying inconsistencies between the panels and facilitate their installation.
• After the cladding of the facade, it will not need any special care. Just washing it is enough.
• The installation of the cladding requires only the exact implementation of the technology of work. Subject to this condition, it is not difficult even when performed independently.
• The panels are so light that no special equipment or devices are required to work on the facade.
• The cost of panels depends on their quality and manufacturer, but basically it is quite affordable.

The disadvantages include the following features:

• The color palette of the panels is wide enough, but when their color has to be matched to the design of other elements of the facade, difficulties can arise. Although you can always order the manufacturer specific color which will cost a little more.
• Plastic panels do not resist fire well - they begin to melt, which leads to the destruction of the material. Therefore, near the house sheathed with them, you should not make a fire.

Installation procedure and necessary tools

For self-fulfillment work, you must have a set of tools and fixtures.

These tools include:

• roulette;
• water level;
• hacksaw with fine teeth;
• a hammer;
• drill;
• screwdriver;
• Circular Saw;
• self-tapping screws with a secret cap 30 mm long.

The surface of the walls to be finished, no matter what material they are made of, must be prepared: they must be clean (without crumbling finishing elements and dirt) and even. If the building is plastered, it is necessary to remove the peeling coating, level the walls, repair the cracks. If the facade is wooden, then it is necessary to treat it with agents against mold, rot and insects before starting work. It is also necessary to carry out treatment with a composition that increases the fire resistance of wood.

If it is decided to use ordinary plastic panels, and the house needs to be insulated, then first you need to perform preliminary work.

• The wall must be protected with a layer of vapor barrier film.
• Next, the crate is mounted. It can be either wooden (the bars are impregnated with an antiseptic) or metal (a special galvanized profile is used).
• Sheets of insulation are cut in accordance with the size of the cells of the crate and tightly fixed in the resulting cells.
• Next, you need to fix the windproof membrane close to the insulation.
• The next step is the installation of the counter-lattice, to which plastic cladding panels will already be attached.

If the panels are equipped with a heat-shielding layer of expanded polystyrene, then there is no need to install insulation.

Before laying the first row of cladding panels, it is necessary to beat off a horizontal line along the entire perimeter of the building using a water level.

It is on it that all the starting bars will be attached. At the corners of the house, you also need to fix the special strips necessary for the installation of corner elements.

Installation of facing panels is as follows:

• The first panel is attached to the starting bar in the lower left corner.
• Each new panel fastened from left to right, and the rows are formed from the bottom up.
• The first panel is fixed with self-tapping screws, and the second is attached by snapping it with a vertical lock.
• Panels are fastened with self-tapping screws, which are screwed into special holes in the panels. A gap of approximately 1 mm is left between the screw head and the panel, designed to compensate for the expansion of the material with temperature changes. This prevents cracking of the plastic.
• If a last panel the row does not fit in length, it must be cut with a grinder and thus adjusted to the length of the facade.

Corner starting strips and elements for each manufacturer are different.

Attached to planks with screws plastic elements corner finishes. The depth of the panel entry into the corner is at least 50 mm. Myself corner element should cover the outer walls by 15-20 mm on each side.

When combining panels different kind their joints are formed using a J-profile.

This gives the cladding a finished look.

What else do you need to know

You need to pay attention to the fact that the panels "under the stone" have a repeating pattern. For this reason, in order to give the facade a natural look, it is recommended to move the panels in each row, giving the masonry natural look. Although you can find information that panels can be mounted at any time of the year, you should not do this at temperatures below -5 degrees.

Stone plinth siding is a modern finishing material, which is one of the most popular today. It allows not only to insulate the building, but also to transform its appearance. This provides reliable protection buildings from negative impact external environment.

Facing stone siding has a natural texture and outwardly practically does not differ from natural material. And in some properties even surpasses it.

Among the many advantages that distinguish stone siding, the following can be distinguished:

The finishing material has a relatively small weight, which greatly facilitates the process of its installation. Wild stone siding can be used for any type of foundation. This property becomes especially relevant if we are talking about the reconstruction of old buildings.

Basement siding under wild stone is eco friendly look finishes. In the process of its production, safe materials and special additives are used to improve quality characteristics products.

The material does not change its properties under conditions of sharp temperature fluctuations.

Plinth siding under the stone reliably protects the walls from moisture and prevents the formation of condensate. Due to this, mold or fungus does not appear on the surface of the material.

Such a coating does not require additional finishing and retains an excellent appearance throughout the entire service life.

The material has an improved locking system that provides the panels with additional wear resistance.

Stone siding does not require much maintenance. You can remove contaminants with plain water and detergents at hand.

More than 20 collections are presented in the 101Siding online store catalog basement siding under the stone the best manufacturers facade panels; a photo exterior finish houses and description of materials can be found in the corresponding section. Our specialists will help you navigate the assortment.

You only need a few minutes to place an order. Select the appropriate type of siding and place it in the "Basket". We will deliver your order as soon as possible.

Currently, stone plinth siding is represented by a wide variety of collections of various shades and textures. This material can be of two types:

Metal siding. He is different increased strength and wear resistance. One of the main advantages of metal siding is high fire safety. That is why the material is wide application when decorating public and administrative institutions.

Vinyl stone siding. This material is made from polyvinyl chloride. Front plastic panels under a stone do not crack, do not dry out and are not subject to rotting processes. The material perfectly withstands the effects of wind, snow, rain and other negative external factors. plastic siding under the stone does not require special maintenance. The service life of the product is at least twenty years. At the same time, wall siding under a stone has a fairly democratic cost.

Modern materials can imitate:

smooth stone;

• antique hand-molded stone;
• aged stone;
• antique stone;
• cobblestone and boulder masonry;
• "torn" stone;
• rubble stone;
• marble, granite, limestone and other rocks.

Photo of facade finishing options various types ground stone siding are presented on the Internet.

As noted above, the facade panels under the stone have a relatively small weight and a well-thought-out fastening system. Thanks to this, their installation can be done independently, without resorting to the services of specialized teams.

Installation of facing facade panels under a stone is carried out in several stages:

1. First you need to equip the crate. It can be made from metal profile and wooden bars. When arranging the crate, it must be borne in mind that the distance between the panels and the ground should be at least fifteen centimeters.
2. After installing the profile, it is necessary to cut correctly facade siding under the stone. Some structural elements can be cut in a special way. For example, stairs.
3. The next step is installation launch pad. Experts recommend starting installation from the left edge.
4. Then the subsequent rows are laid. Please note that the facing panels under the wild stone are installed as close as possible to each other. No gaps should form in this case. If the facade panels "Wild Stone" are mounted on wooden crate, you can use nails to install them. If we are talking about steel elements, special self-tapping screws are suitable.

Important: the Wild Stone facade panels must be mounted in such a way that thermal gaps remain. They must be present regardless of which crate the base material is being laid on. If thermal gaps are not provided, over time, stone-like facade panels may deform and lose their presentable appearance (numerous photos of such examples can be found on the Internet).

It will be useful for you to learn also about on our website.

For exterior decoration of the facade, plastic facade panels are most often used. Sometimes they are called . This material has great strength and is quite easy to install. It is recommended to install it with insulation: this will allow the house to retain heat inside for as long as possible.

Installation Features

Most often for the installation of vinyl siding, conventional wooden slats. Sometimes they are replaced with a special metal CD profile. The same profile is used for the installation of drywall in the room. Given that the panels will be mounted outdoors, it is better to use hardware, since the tree tends to absorb moisture, which significantly reduces its life.

You should choose a CD profile with a cellular frame: this will make it easier. The profile should be placed vertically; each strip is mounted at a distance of 35 cm from the adjacent part. Only the upper and lower strips are installed horizontally.

In order to install the profile, metal suspensions are often used. They are bent with the letter P and attached to the wall with screws or dowels. The distance between the dowels should not be more than 50 cm. It is optimal to place them at a distance of 40 cm from each other.

Panels will be located on short distance from the main wall, creating decorative surface. These voids can be used by placing insulation in them. Mineral wool or polystyrene is often used as a heater. When installing siding with imitation stone, it is important to consider that there are no gaps or cracks left.

Often the siding does not ideally fit in height, and the last row has to be shortened by yourself; but there will be no mounting holes on the panel. Fasten the sheet in such a way that the screws pass along the decorative seam. Three fixation points are enough for one sheet.

To finish the facade under a stone, it is best to use facade panels, as they are specially designed for this. The price of the material is much lower than that of natural stone, but, unlike the latter, siding always looks perfect and is easy to install.

In addition to ease of installation, siding has the following advantages:

• It is easy to clean and does not require any additional maintenance.
• The use of siding will allow without additional costs insulate the wall and hide the insulation.
• The material does not allow moisture to pass through and will be able to protect the walls from it.
  None required cement mortars which are quite expensive.
• The material itself is much cheaper than natural stone and has a form that is convenient for installation.

Install vinyl siding quite possible on your own. This will take a little time, a minimal set of tools and a little patience. Even an amateur can handle the installation.

Today we will talk about one very interesting finishing technology, which is used for decorative design of facades. This is the cladding of the house with panels under the stone. It is interesting in that the panels themselves, although they are not a stone, can not be distinguished from masonry in appearance. You will learn about the varieties finishing material and technology of its installation on the facade parts of houses. The information will be useful to those who are going to use this material for cladding. own house. It will provide an opportunity to understand what and how the masters who have been entrusted with this responsible work are doing.

House lined with stone-look plastic facade panels

What are panels

facade panels for exterior decoration of houses under the stone belong to the category of siding. Accordingly, the method of their installation is fastening to the crate (frame), which itself is attached to the facade of the building. That is, no wet processes associated with cement or adhesive solutions. This is the main distinguishing feature panels from the same stone, tiles, clinker and other facing materials.

More recently, this material was called basement siding, because the original purpose of its production was to produce products that could be used to line the basement of the foundation (protruding above the ground). Over time, it turned out that the possibilities of basement siding are much wider. One of the masters simply tried to lay it on the wall, since the decorative properties allowed this. The effect was unusual and original. And so it went, and the popularity of the material immediately grew at times.

Model line of facade panels under stone

And the reason was the drawing of the panel, which is a stone or brickwork. At the same time, the stone can be any, because the forms of the ebb of the product are formed on a standard masonry. That is, they collect masonry from some natural stone in the workshop on the floor, fill it with a molding sand that repeats its pattern. After drying, the form is removed and used for its intended purpose. It's the same with bricks.

As for the raw material for pouring products, the choice is huge, but acrylic, vinyl or propylene are more often used. Although some manufacturers today offer metal panels or fiber cement. The former belong to the category of cheap materials, the latter are more expensive. But in terms of quality, some panels from the first group are not inferior to the second. Wherein polymer material exactly repeats the pattern and structure of the stone, therefore, in terms of the degree of realism, even next to the facing, it is difficult to distinguish it from the natural stone finish.

And if we consider that the price component of the panels is several times less than that of natural and even artificial stone, it becomes clear why such popularity comes from.

Huge variety of textures and colors

On our site you can familiarize yourself with the most. In the filters, you can set the desired direction, the presence of gas, water, electricity and other communications.

Today, on the construction market, you can purchase panels for sheathing a house outside under a stone with imitation of such varieties:

granite;

slate;

stone rubble;

sandstone;

dolomite;

tufa and other rocks.

At the same time, manufacturers offer various color imitations of panel products, which expands the range offered several times more. That is, the model line of cladding facade panels is so wide that it takes a lot of time to get acquainted and choose. And this makes them very different from traditional siding, which has a variety of patterns and color design not so rich.

Front plastic panels with imitation of rubble stone

Pros and cons of stone facade panels

We have already familiarized ourselves with some of the advantages of panels for the facade of a house under a stone, but here is their complete list:

huge range in terms of color and texture;

realism imitated stone or brick;

small specific the weight, which simplifies the installation process, while the panels do not overload bearing structures buildings (this advantage does not apply to fiber cement products, they are quite heavy);

acceptable price(again this does not apply to fiber cement and metal products);

perfectly cope with all natural, even sunbeams, under the negative influence of which they do not change their color and do not warp;

panels do not rot, do not rust, colonies of harmful microorganisms do not take root on them;

simple mounting;

long-term exploitation- not less than 50 years old;

simplicity maintenance - it is enough just to occasionally pour water from a hose under a little pressure.

On our website you can get acquainted with the most popular projects of houses for the decoration of which stone, natural and artificial stone panels were used - from construction companies presented at the exhibition of houses "Low-Rise Country".

And literally two lack:

plastic panels at low temperatures become brittle;

with strong heating in summer, it manifests itself extension products, so it is important to follow the installation instructions exactly and not to forget some of the nuances of the installation process.

Used for cladding and plinth, and walls

Dimensions and specifications

It should be noted that depending on the raw material, both characteristics and dimensional parameters will differ.

The length of plastic facade panels varies in the range of 1-1.25 m. But there are sheathing elements on the market up to 6 m. The standard width is in the range of 26-45 cm. The latter is more common. Thickness - 1-1.2 mm, for fiber cement from 6 to 12 mm. There are plastic insulating layer up to 30 mm.

Concerning specifications, then the main one is temperature regime operation, which is in the range from -40C to + 60C. All other characteristics, such as strength, moisture resistance, heat resistance and fire resistance, depend on the material from which the panels are made.

Dimensional parameters of the facade panels of the Yantar model

Mounting technology

So, having dealt with the material for sheathing the house outside under the stone, we proceed to the method of installing it on the facade of the building.

On our website you can find contacts of construction companies that offer the service of insulation and finishing of houses, and use materials of their own production for this. You can directly communicate with representatives by visiting the exhibition of houses "Low-Rise Country".

Frame installation

It should be noted that some manufacturers offer panels for facade cladding with trim elements included. This is convenient because there is no need to select the material for the frame separately. Although the elements themselves are metal profiles. Therefore, if the crate is not included in the delivery package, then profiles for the installation of drywall or wooden bars With maximum cross section 50x50 mm. We immediately indicate that metal guides are preferred. They do not change their linear dimensions under the influence of changing humidity and temperature. What can not be said about wooden bars.

It must be noted that not all stone imitation panels are attached to the crate. Some of the models are attached to the wall of the house if it is well aligned, or if a Penoplex type of slab insulation is laid on top of it. In such facing material already have mounting holes and installation steps are as follows:

panels apply at the place of attachment;

through holes in the wall notes;

filmed panel;

by tags perforator make holes where plastic dowels are driven;

establish facing material on the wall;

screwed his self-tapping screws.

Video description

To understand how it all happens, watch the video:

But in this article, we are mainly interested in the crate installation method. Therefore, first of all, its elements are mounted on the facade of the house. To do this, pre-marking places for mounting galvanized profiles. Necessarily near window and doorways, as well as at the edges of the wall. All other guides are installed in increments of 50-60 cm. By the way, the installation direction is vertical.

Along the marked lines mount direct suspensions with a step of 50-60 cm. They are attached to the wall with self-tapping screws on plastic dowels.

Install thermal insulation layer. More often it polystyrene boards or mineral wool in mats. The insulation is directly put on direct suspensions.

Stacked vapor barrier from the diffusion membrane. It is laid in strips with overlapping edges within 10-15 cm and closed with self-adhesive tape.

Installed to hangers guide profiles, they are attached to them with self-tapping screws. The main task of the manufacturer of works is to set all profiles in a single vertical plane.

Sheathing for facade panels, assembled

Installation and fastening of facade panels

The installation process starts from the corner of the building, usually from the left. Assemble the panels in order. Mounting method:

for plastic models self-tapping screws;

for fiber cement kleimers.

In the first case, mounting holes have already been made directly in the facing material. They are in the form of grooves, which makes it possible to regulate the exact joining of adjacent elements to each other.

Fiber cement panels fixed to the frame with clamps

Here is the algorithm of the installation operations:

first installed and attached to the crate starting bar , which is strictly set horizontally;

filled in this way first row cladding, at the end a corner element must be mounted.

It is very important to set this row horizontally. Then, in exactly the same sequence, the remaining rows are collected to the upper edge of the wall. Please note that in the vertical direction, the skin elements are assembled using a tongue-and-groove interlock, which ensures the rows are completely parallel to each other and the joint is 100% tight, which is very important for facade materials. The edges of the top row are closed with the so-called J-bar. In fact, this is the finishing bar, which gives the butt the completeness of the design.

Proper assembly of facade cladding

An important stage in the decoration of houses outside under a stone is the facing of areas near openings (windows and doors). Cladding panels from plastic or cement - a material that can be easily processed. Cutting it to the required size is not a problem. To do this, use a grinder or stationary cutting machine. Therefore, around the openings, the panels are laid with cutting to the required value (height or length). The installation itself is carried out according to standard technology. After completion of work, the open ends are closed with special corners or slopes, which complete decoration building facade.

Video description

How to install facade panels from the manufacturer Döcke-R, see the following video:

Video description

And in this video, examples of finishing houses with artificial stone:

Conclusion on the topic

Paneling a house under a stone is one of the effective ways to give the building presentability, solidity and unusualness, which stands out from everything that they can offer today construction companies. We add that this type of cladding is an inexpensive pleasure, but with a fairly long service life. That is, in almost many respects it surpasses other materials and technologies.

Improvement problem appearance The facade of the building is easily solved by using facade panels under the stone. We will talk about the device, varieties and features of the installation of this finishing material further.

Features and structure of stone facade panels

Facade panels under the stone make up the facade system, which protects the surface of the building from external influences.

Facade panels are installed both in new buildings and in the reconstruction of old ones.

For device facade system aluminum or metal carcass. Therefore, these panels are easy to install.

Facade panels under a stone consist of:

• polyurethane layer
• resin,
• foam layer
• stone powder.

For the manufacture of facade panels under the stone, modern polymers are used. Using the injection molding method, these panels are produced on injection molding machines, this process allows the panels to remain in their original form for a long time.

Scope of use of facade panels under a stone:

• facade decoration,
• finishing individual elements building,
• lining of individual floors,
• decoration of the tower, lantern,
• fence lining.

Facade panels under the stone photo:

The cost of facade panels under a stone depends on such factors:

• material quality,
• layer thickness,
• panel type,
• product invoice,
• panel appearance.

Advantages of installing facade panels under a stone

Studying about the facade panels under the stone reviews, we highlight the following advantages:

• additional leveling of the surface is not required;
• high level of thermal insulation;
• the possibility of installation at any time of the year;
• have low noise transmission;
• the service life of some panels exceeds 50 years;

• the possibility of adjusting the structure by using aluminum or steel profile;
• resistance to exposure to ultraviolet rays, precipitation, humidity, temperature changes;
• resistance to mechanical damage;
• anti-corrosion;
• high level of heat resistance;
• facade panels under the stone have a light weight compared to natural stone;
• easy care and washing;
• safety for health and environmental friendliness;
• electrical conductivity;
• ease of installation;
• facade panels do not load the building with additional weight, due to their lightness;
• facade panels under the stone, almost do not differ from the original masonry, but their cost is much less than the cost of real stone;
• variety of colors and designs.

Varieties of facade panels under the stone

Facade panels vary in variety color solutions, dimensions and installation methods. Facade panels include:

• metal panels with polymer coating;
• facade panels of vinyl type;
• thermal facade panels;
• sandwich panels of cassette or three-layer type;
• facade panels of fiber cement type;
• front panels under a brick or stone laying.

Fiber cement panels contain cement, minerals and cellulose fibers. These panels mimic various materials, including masonry.

The structure of the fiber cement facade panel includes the presence of:

• fiber cement panel
• sealing gasket,
• ventilation film,
• additional panel
• gypsum board,
• vapor barrier film
• gypsum sheet.

Advantages of fiber cement facade panels:

• high level of frost resistance,
• long period of use,
• lack of formation of corrosion and mold,
• fire safety,
• ability to withstand large temperature fluctuations,
• thermal insulation,
• soundproofing.

Disadvantages of fiber cement panels:

• require painting after installation,
• high level of water absorption,
• low level of resistance to mechanical stress.

Panels with polymer coating, are distinguished by high durability, frost resistance, resistance to moisture absorption, lack of corrosion, ease of installation. The disadvantage of such panels is the low level of thermal insulation.

Facade panels under the stone are used for decoration plinth parts building. Such panels are made of resin, which has a polypropylene base. After installing the facade panels under the stone, the building has an attractive appearance and almost does not differ from the real stone cladding.

Advantages of stone facade panels:

• durability,
• resistance to ultraviolet radiation,
• easy installation,
• heat resistance.

Depending on the structure, facade panels under the stone are divided into:

• homogeneous,
• combined.

Homogeneous type façade panels have a homogeneous structure and are made of PVC.

Combined facade panels have an outer plastic coating and internal - polystyrene foam or foam. The inner layer acts as an insulator.

Stone-look PVC facade panels

PVC facade panels consist of a vinyl layer and polymer mixture, such panels are called siding. In relation to the siding design, there are:

• siding of mass coloring - differs in a variety of flowers and coloring;
• siding with highlighted seams has a non-uniform coating in which the seams are painted in a different color;
• exclusive siding - has a non-uniform texture and highlighted seams, like imitation of natural stone.

Siding under a stone happens with imitation of granite malachite, marble and other stones.

PVC panels are made from a single sheet, which is given the desired shape. After PVC manufacturing panels, rectangular panels are obtained, which are easy to mount.

Panels are attached to each other special locks. The first, last and corner panels have a special lock. To ensure ventilation of the facade space, a perforated edge is installed.

PVC siding is fastened to the wall with nails or self-tapping screws. In order for the siding locks to snap into place and there are no cracks, it is necessary to install the siding in such a way that the panels overlap each other.

Advantages of PVC facade panels:

• the duration of operation exceeds 25 years;
• resistance to large temperature changes;
• resistance to ultraviolet radiation;
• antiseptic - the absence of mold formations;
• anti-corrosion;
• siding is covered with a special paint that has a water-repellent, anti-pollution effect;
• resistance to mechanical damage;
• facade panels under stone price - more affordable than that of piece or natural stone
• ease of installation.

Facade panels under stone - installation

Before installing facade PVC panels, you should make calculations and purchase this material.

For calculations required amount facade panels, you first need to determine the area of ​​\u200b\u200bthe facade on which the panels will be installed.

Break the facade into several rectangular or square shapes. Determine their area, and then summarize the results.

Divide total area per panel area. It is better to buy a few more squares of material to compensate for all kinds of cuts.

For work, use:

• knife for cutting plastic products,
• grinder,
• jigsaw,
• hammer,
• scissors,
• perforator,
• measuring tape,
• building level,
• chalk,
• screwdriver.

Preparatory work includes preliminary leveling, insulation and waterproofing of the facade.

At the time of purchase, consider the presence of self-tapping screws and fasteners for panels. To cut siding, make a small cut and then break the material.

First, determine the place from which the installation of the siding will begin. If the facade was previously finished with other materials, then start from the same place. If the siding is installed on new facade, start work by overlapping the foundation. Before installing the main type panels, it is advisable to install the primary and corner panels.

After installing additional parts, install the starter strip. Determine the border space of the first row and then mark the width of the first panel. Leave a small gap between panels.

Insulate windows and doors with architraves, flashings, special strips and finishing panels.

After installing all the parts, proceed with the installation of the siding. The panels are installed from the bottom up, snapping into each other. The panels are fixed to the wall with self-tapping screws.

The final stage includes the installation of the edges on the roof.

Features of installing facade panels under a stone

Some types of panels are installed on a pre-mounted crate made of aluminum or steel profiles. Such a system is called ventilated.

The profile is attached to the wall with brackets. The walls do not require additional alignment and pre-finishing.

There are several technologies for installing a facade system:

• post-transom type,
• modular type,
• spider type.

An additional layer of insulation is installed in the space between the profile and the panels. Types of heaters:

• mineral wool,
• fiberglass,
• foam.

During the installation of facade panels, a number of requirements must be met:

• the minimum installation temperature should not be below 0 degrees;
• anti-corrosion of self-tapping screws, anchors, brackets and other fasteners;
• the profile structure should be placed in the same plane to avoid the appearance of gaps in the ventilated space.

The disadvantage of this installation is the appearance of an unpleasant acoustic effect, which does not allow the installation of such facades in residential premises. During strong wind, the ventilation space emits loud sounds and whistle.

Facade panels under the stone video: