Everything. Not only Soviet, which are covered by a multi-seating snowy fur coat and require manual defrost.

Of course, equipped with a drip defrosting system or NO Frost system. Nevertheless, sometimes they need to be disconnected, free from the ore or ice and wash.

Drip defrosting system

Basically meets in the middle refrigerators price segment. The "crying wall" is only in the refrigeration chamber. Freezers need to be defrosting manually.

The drip system works on the principle of the alternation of freezing and thawing. The compressor in such refrigerators is turned on and off at certain intervals. When it is active, the temperature in the refrigeration chamber decreases. On the evaporator located on back wall An aggregate is formed by IY.

If the thickness of the land on the walls freezing chamber Reached 5-7 mm, the refrigerator is time to defrost.

When the compressor is turned off, it becomes warmer, and condensate appears on the surface of the evaporator, which flows into the pallet on special floors. Liquid accumulating in this pallet gradually evaporates. As a result, in the refrigeration chamber, there is almost no inlet, the side walls and other surfaces remain dry.

No frost.

More advanced and expensive system. It can be equipped with both refrigeration and freezing compartment.

Here, too, there is a compressor and evaporator, but the cold air is distributed across the cameras using a fan, and the cooling element is placed in a special element of the system, where moisture evaporates and evaporates.

Think that refrigerators with no frost do not need defrost, - a mistake.

Gum on the doors wear out when the cameras are opened inside warm air, Sometimes the light goes out in the house, and the refrigerators themselves fail.

In freezers with no frost, also forms anaya! But much less and less often. In addition, they, like drip units, at least once a year need hygienic processing. After all, spots and flips from food are accumulated on the shelves and walls, crumbs are clogged into microsers.

How to defrost refrigerator

To in the refrigerator, the device is enough just to turn off. With a freezer, everything is more complicated. It should be empty, give ice to lean, but only then wash.

If you are worried about the safety of the products, fold them into a regular package along with ice pieces and tie the top. So the food will remain cold longer.

When defrosting and washing the refrigerator can not be used rough metal sponges and aggressive detergents.

Inside the cameras, place the containers for collecting melt water or put towels.

Landing the frost, clean the wooden or plastic blade. In order not to damage the walls, it is better not to get involved in the process, trying to repel the maximum of the land, and clean only its upper layers.

How to accelerate defrost

Method 1. Turn on the fan

Take the fan and install it in front of the outdoor freezer. Air flows accelerate ice melts. You will only have to properly decompose the rags and return to the refrigerator after a while.

You can only fold products in fully dried cameras.

Method 2. Put in the freezer with a saucepan with hot water

Fill a small saucepan or a bowl of boiling water and place it in the freezer. If there are several shelves in it, put on the container with the liquid for each of them. For a better effect, close the door.

After 5 minutes, change the boiling water already cooled water. The procedure must be repeated as long as the freezer does not fully overtake.

Modern refrigerators are much better than those with whom we had to deal with our grandmothers and mothers. But they also need defrost - and this is quite troublesome business. How to defrost the refrigerator correctly and quickly, not spending on this occupation all day?

Why nevertheless defrost refrigerator?

If the walls are formed on the walls, then everything is clear - how to do without defrosting if the space of the refrigerator is constantly decreasing due to the centimeter deposits of ice? But why defrost refrigerator with the system "Know Frost"?

Refrigerators with the function "Know Frost" do not accumulate other. This technique is so programmed that the fan that provides uniform circulation of the air inside the refrigerator, periodically stops working, instead the heater is turned on, and the hoax melts. The resulting water is displayed outside, in a special tray where it is gradually evaporated.

But such refrigerators should be periodically defrosting. Yes, others do not accumulate, but still need to flush dust and other pollution to avoid the reproduction of microbes and bacteria at the storage location. Therefore, 2-3 times a year you need to turn off the refrigerator in order to wash it.

Causes of the appearance of land

The formation of a land in the refrigerator is a natural phenomenon, but if you find it quickly, and the refrigerator has to often defrost, you need to find the cause of this problem. It may be:

• thermostat malfunction;
• loose fit of the door of the refrigerator;
• the refrigerator is long standing with an open door.

Actually, the frost is formed due to the insertion of the refrigerator of warm air. Therefore, he will appear anyway, at least due to the fact that the door opened periodically.

Preparation for refrigerator defrost

• Build a refrigerator preferably in the cold season - then products can be removed on the balcony for a while, or at least put near open window. If you need to defrost the refrigerator in the summer, you need to trace so that there are no perishable products.

• In order not to melted the products in the freezer (as you know, re-freezing negatively affects taste and other food quality), they need to be wrapped in a package, put in a saucepan, close the lid and send to a more or less cool place.

• Before starting to remove the products, you need to set the temperature to divide "0" and turn off the device from the power grid.

• Remove all the shelves and drawers from the refrigerator, wash them carefully until it is deficient.

• If there is no special tank for melt water, below you need to put a bowl for collecting water so that it does not flow to the floor.

Getting to defrost: Step by step instructions

• If there are no perishable products, you can wait until the ice melts on my own, opening the refrigerator door. Otherwise, it is possible to slightly accelerate this process, putting the container with a slightly hot water (boiling water no need to be poured, since the electromechanics of the device may be damaged under the influence of high temperatures).

• Substituting ice pieces can be considered a plastic blade, but not sharp objects (for example, a knife) that can scratch paint and even working elements.

• During the washing of the refrigerator, it is necessary to ensure that water does not get water in its working parts - this can lead to corrosion and further breakage. It is also important to empty the container in which water is going to.

• While the refrigerator is defrosting, you need to wash the boxes and shelves. This can be done with the help of food soda - it effectively removes pollution, odors and bacteria.

• When the refrigerator knows, its internal surfaces need to be thoroughly rinsed - better soda, although many mistresses use detergent For dishes. But chemicals It is better not to use, since it remains difficult to remove the smells in the refrigerator that can be mixed with products. And besides, unlike soda, chemistry must be thoroughly rinse to avoid contact with products.

• After that, it remains to dry the refrigerator, put back drawers and shelves (also dry) and load products.

What else is useful to know

• After washing the refrigerator, it needs to be carefully dried before turning on. To speed up the process, you can put the fan before the open door, or use the vacuum cleaner, which has a function of blowing air.

• After drying the refrigerator, it is necessary to wipe the floor under it dry and around, so that during the inclusion, closures did not happen. Then wipe the surface of the refrigerator with a dry cloth, and only after that you can turn on the device into the outlet.

• You can download food back after the refrigerator is cooled enough.

The most common errors when defrosting the refrigerator

When defrosting the refrigerator, the same errors that may have very negative consequences are often allowed.

Acceleration defrost

You can not put in the refrigerator with boiling water, seeking to quickly eliminate out. This can lead to overheating of the device, and therefore, its breakdown.

Crying ice sharp objects

This is the easiest way to damage the surface of the refrigerator and even working items. You can scrape ice only smooth blades. You can accelerate the ice melting process only in one way - to put the containers with warm water.

Turning off the device after unloading products

Before you start unloading products, you need to turn off the refrigerator, putting it on the appropriate division, and disconnect from the power supply.

Use abrasive chemistry for refrigerator washing

With all sorts of powders, you can easily scratch the surface of the refrigerator, so it is recommended to avoid them not to damage the paint. In addition, it often remains a strong smell that absorbs food.

Installation of wet components

All drawers and shelves need to be carefully dried before installing back to the fridge. Otherwise in the refrigerator will increased humidity, and soon frost is formed on the walls.

Download Products in Uncooked Refrigerator

According to many experienced owners, the refrigerator of any category needs a periodic manual defrost. Let's try to figure out whether the promises of the manufacturers who guarantee a long carefree life of the home freezer without defrosting, and how to clean the refrigerator from Inea to not harm household appliances. If you need, you can contact our company.

Preliminary preparation - clean the refrigerator!

It is necessary to prepare for the fact that the refrigerator will be unavailable from 3 to 24 hours depending on the model and the magnitude of the snow layer on the surface of the refrigerator.

Therefore, you will have to get rid of perishable products immediately before the defrost procedure, especially if you are going to produce a procedure for cleaning household appliances from "Snow Shub" in the warm season.

Also prepare the necessary towels or rags, basins or bowls, which will be required to collect moisture in the refrigeration chamber.

The main stages of the refrigerator defrosting procedure

1. Disable household appliances from the network. Make sure that the network wire is located at a safe distance so as not to damage and not soak it in the defrosting process.

2. We take out the products from the refrigerator. If you have perishable products, it is better to take a big bowl or other capacity and folded there sausages, fruits, vegetables, cheese, etc. Place the container in cold water And add ice. If you defrost the refrigerator in winter, then the products can be put on the balcony.

3. The next step is the immediate defrosting of the refrigeration chamber. If the hostess has time, then it is preferable to wait until the ice is melted independently. If there is no time to wait, there are ways to accelerate the defrost "".

However, not all options " fast defrost»Good. We list the main options and indicate which you can apply for defrosting the unit, and from which you should refuse.

Perhaps the most common way. "Snow fur coat" can be easily defrosting with a jet of warm air. The process itself will be reduced to one and a half or two hours. Direct the jet of warm air on the ice crust. Remember that the hair dryer can not be put inside the refrigerator so that dripping water did not get on it. After the ice fell a little, you can easily remove it with a rag.

This method is the most reliable and safe. However, you should not install the hair dryer at the maximum. Adjust the temperature of the air jet according to your feelings.

Type warm water in the warmer and lean it alternately to the icing walls, carefully removing the outflowing ice. It is difficult to use this method for hard-to-reach places in the freezer.

It would seem, there is nothing easier than to remove the "ice fur coat" with the help of a knife. However, this is a very unsafe way. You can hurt yourself, and damage the walls of the refrigerator. Therefore, this method is better not to use, but wait for the natural thawing of the "thief crust."

In no case cannot be used boiling water for the refrigerator defrosting process. Thus, you just hurt home appliances. If you want to speed up the process, put a bowl or a saucepan with warm water in the refrigerator (make sure that the water temperature is not too high).

• natural thawing

The safest of all presented ways. Wait until the ice crust is melting naturally.

4. In order to avoid corrosion, water in the freezer should be assembled with a cloth. Some household appliances are equipped with a special capacity for collecting fluid formed from defrosting.

5. So that the refrigerator lasted as long as possible without a "ice fur coat", treat the rear wall of the chamber with the help of glycerin.

6. After the complete release of the refrigerator from the "Ice Okov", it needs to be treated with soap solution.

7. Clean the watering hole from condensate. The hole, as a rule, is located in the refrigeration chamber (plastic wand is stuck in it).

8. After processing, leave the door of the refrigerator open to the complete surface drying.

9. After 1-2 hours, check whether the refrigerator is dry. If this did not happen, leave the doors open to the full drying of the freezer. In no case should not load products if the unit is not fully succeeded.

10. If everything is in order, close the doors and turn on the power cord into the outlet.

11. Wait until the temperature in the refrigerator becomes optimal, and only after that load the products.

We defrun the refrigerator equipped with the NO Frost system, Frost Free and Full NO Frost

Modern manufacturers equip the refrigerators with NO Frost, Frost FREE, and Full No Frost, meaning the fact that household appliances work without ENEY formation. However, it is worth paying attention to the fact that the concept of "refrigerator without Ineu" does not exist. The surface of the evaporator has a negative temperature, and the atmospheric air is always wet, respectively, the moisture will settle on the surface of the evaporator and freeze. The NO Frost systems indicate not about the absence of an inlet as such, but about the method of thawing the evaporator.

Animes is formed in any refrigerator, however, in household appliances equipped with the NO Frost system, the heating element contributes to the exhaustion of ice, water flocks into a special tray, where it appears later. Therefore, it is necessary to defrost such a refrigerator only for the purpose of antibacterial surface treatment. Another reason why should not defrost the modern refrigerator often, is the duration of this process. Having more complex designThis household appliances will be deficient at least a day. The "Full NO Frost" system allows you to avoid the formation of ENEY even in the freezer.

It is important!

A refrigerator that does not require defrost requires regular processing. Weekly wipe the inner surface of household appliances with the help of special wet napkins or soda mortar.

What is harmful to the refrigerator, or how to reduce the rate of education Inea?

If your refrigerator does not have any of the above systems, then the defrost will be for you a regular and obligatory procedure. How often do you need to defrost refrigerator? It all depends on the rate of increments of the Inea, which directly depends on the conditions of technology.

The main factors affecting the rate of increasing the "snow fur coats" in the refrigerator

1. Elected-quality packaging and storage of products

Any product (fruits, vegetables, mineral water etc.) - contains water in its composition. If you keep food in open video Or in an incompletely covered cup or a saucepan, then the products are a constant source of moisture, which contributes to the formation of "snow fur coats" in the refrigeration chamber.

It is important!

Keep products in vacuum, or tightly closed dishes. So you can avoid frequent refrigerator defrosts and protect food from entering bacteria that live on the surfaces of the refrigerator.

2. Refrigerator door opening frequency

Moisture can get into the refrigerator not only from the products, but also from the air. With frequent opening of the door inside the chamber, humid air falls, thanks to which new snowy layers are formed on the walls of the refrigeration chamber.

3. Correctly executing the defrost procedure

The maintenance of the refrigerator directly depends on many factors, including from execution proper technique defrosting. From this, it would seem that the elementary procedure, the further uninterrupted work of household appliances depends.

How often do you need to defrost refrigerator

Household appliances equipped with the NOFROST system should be defrosting no more than 1 time per year to carry out the hygienic antibacterial processing of the refrigeration chamber surfaces.

Refrigerators of other models need to be deflated in the cold season - no more often than 1 time in 5-6 months. IN summer time The defrost procedure is worth 1 time in 2-3 months. If you decide to defrost the aggregate in the summer, then it is better to do it in the evening or night hours. When the refrigerator defrosting in the heat, household appliances will be much more difficult to restore the necessary temperature level. Also, the compressor may suffer from this.

Modern refrigerators equipped with NO Frost, Frost Free, and Full No Frost should be defrosting no more than once in 1 year to conduct antibacterial surface processing of the refrigeration chamber. The remaining models should be defrosting as needed. For defrosting, it is better to choose the cold season. If the unit had to be angry in the summer, then it is preferable to do in the evening or night hours so as not to harm household appliances. In hot weather, the refrigerator will require more efforts so that the optimum temperature is installed in the freezer.

Do not use knives, as well as boiling water pans to accelerate the defrosting process. It can harm household appliances. To the "ice fur coat" for a long time did not increase in your refrigerator, while defrosting the rear wall of the glycerin.

Proper defrost - a guarantee of long and successful work of household appliances!

The days of small pancake refrigerators went back, from the sudden noise of which the owners jumped at night. However, the problem of how to defrost the refrigerator, remains relevant to this day.

Nowadays, the kitchens are mainly decorated with high multi-chamber handsome men who have the NO Frost system and the refrigerator defrosting occurs in automatic mode. Such a system equips many designs refrigerators Famous brands, it is also available in models of such relatively inexpensive firms as "Atlant" or "Biryusa".

But even in modern aggregates on the walls periodically formed, followed and it is necessary to think about the defrosting process.

If you have already puzzled as a question, how to defrost the refrigerator, we will give you recommendations that this process goes quickly and in the right direction.

Causes of nondes on the walls

Education in the inner details of the refrigerator is a natural process that occurs due to warm air inwarding the unit when the door is opened. If a snowy "fur coat" often increases on the walls of the refrigerator, the reasons for its occurrence can be different, from technical to household. As a rule, score is formed if:

• faulty thermostat;
• the geometry of the door of the refrigerator is impaired and it flies loosely;
• often you think about the open niche of the refrigerator for a long time, what you better eat at the moment: a sausage or yogurt, and how this food can affect the slightness of your figure.

How to quickly defrost the refrigerator and what is the oddness of actions, if technical reasons are excluded? Just prepare the necessary screwdriver for trouble-free defrosting the refrigerator and inspire yourself to be determined from the menu for your lunch before the door opening.

How to prepare a refrigerator to defrost

Getting started to the defrost process, do not forget about the following preliminary moments:

• do not start the process if your refrigerator is scored by perishable products and you have nowhere to shift them, it is better to leave this occupation to more favorable times;
• often, there is a very high temperature in the room, you should not begin the procedure to defrost the device, if at the moment it is precisely this, in this case the refrigerator will be long and intensively typing given parameters than you can shorten the service life of the compressor, engine and other parts;
• turn the temperature control knob to the "0" mark and disconnect the refrigerator from the power to the network before you start to remove products;
• if you have a system that does not provide for the drainage capacity of the outflow, then before starting to defrost the instrument, it is better to install a pallet at the bottom or a wide flat bowl for collecting water;
• well, if you have drain hosewhich you can directly install into a drainage hole for the drain of melt masses in order to be better output from the refrigerator;
• remove all trays and drawers so that they do not interfere with the defrosting process.

Step-by-step action plan

When you finish preparatory activitiesThe question will immediately rise how to quickly defrost the refrigerator and how the process itself will be held. If you have enough free time, and there are practically no products extracted from the refrigerator, then it is best to just open the door and wait until I find out and stand on my own.

If you are in a hurry, then the process of how to defrost the refrigerator, you can accelerate in the following ways.

1. Install on one of the shelves of the refrigerator bowl with hot water or a heating pad filled with boiling water. Warm pairs will actively affect ice masses and quickly defrost them, leading to a state of fluid.
2. Install the heater or fan heater before the open door, which will drive the heated air into the refrigerator niche, contributing to the outflow process.
3. Relive the unit from snowy growths using a normal hairdryer. The flow of warm air will create conditions in order to quickly clear the walls of the wall.
4. It is often necessary to consider the deciding slices of ice with a special plastic blade, then the defrost of the refrigerator will pass faster. In no case do not use sharp metal objects that can damage the paint and even spoil the details affecting the refrigerator's performance!

Carefully make sure that the flowing water does not fall into the unit, this can lead to the damage of the working parts by gradual corrosion formation in the inside.

When your refrigerator is completely released from the ice and the system is cleaned, it is necessary to take into account that

• it is necessary to wash the inner surface, as well as trays and drawers, and thoroughly dry, when washing, add to the solution flavoring, food soda or vanilla essence, it will help to eliminate the smell and give a pleasant fragrance of the inner surface;
• in order to carry out the drying process quickly, you can use the conventional fan by setting it before the open door or a vacuum cleaner on blowing air.
• after you sucked the refrigerator, thoroughly dry the floor around and under it so that when you turn on, closures and other negative consequences, Then swing the surface again with a dry clean cloth, close and connect to the network.
• you need to download products when the required time has passed after switching on and you can see what temperature at this point inside the unit, it must already be low enough.

Do not forget that if you have old refrigeratorYou need to defrost it, without waiting until the door stop closing the door from the snow coat.

Even if you have new model And there is automatic system "No frost" or a drop "crying" evaporator, it is necessary to remember how to defrost the refrigerator and that it is necessary to defrost your device quite often to bring in a better working condition and extending the service life of the instrument.

For many years, refrigerators have been an integral part of each kitchen. New super-modern household appliances do not require careful care and do not deliver large hacks. But it does not prevent to know how to properly ensure defrosting and whether it is necessary to do this.

Why defrost refrigerator and freezer

The principle of work of any refrigeration equipment It is a closed loop in which the motor-compressor runs through the pipes special refrigerant. Usually the system is filled with freon. Passing along the high and low pressure, moving from a liquid state into gaseous and back, the refrigerant provides a decrease in temperature in the refrigeration and freezer.

The principle of operation of the refrigerator is a closed loop in which the compressor drives the refrigerant pipes (designations in the Scheme: 1-condenser, 2 - capillary, 3 - evaporator, 4 - compressor)

This is how it happens:

1. Freon pair injected into the capacitor are cooled and condensed. The substance passes B. liquid state. The heat obtained from Freon, the condenser is in the environment. That is why the rear wall during the operation of the refrigerator is always hot.
2. After the condenser, the liquid freon enters the capillary tube under high pressure. While driving through the tube, its pressure is gradually decreasing to the desired level.
3. Liquid low pressure freon after the capillary falls into the evaporator channels, where, taking heat, instantly boils and turns into steam. Due to this, the internal volume of the chamber is cooled. Anaya is formed on the surface of the evaporator.
4. After passing through the evaporator, Freon's pairs are pumped out by a compressor into a capacitor.

The cycle is repeated until the evaporator has not established set temperature. After that, the compressor is turned off.

The warm air of the surrounding space leads to the fact that the temperature inside the refrigerator gradually rises. When it reaches a definite value, the compressor turns on again, repeating the described cycle. Moisture contained in the air freezes. A snow-ice thigh appears on the surface of the evaporator, which violates the necessary air exchange and makes it difficult to work the device. With a large layer, the compressor will work at full power. This will increase electricity consumption. The number of job cycles will increase. Turning off the compressor will occur more and later, and then stops at all. As a result of household appliance Function will be broken proper storage Products will dramatically reduce its service life. Also, the compressor may fail and will need to replace it. That is why it is necessary to defrost the refrigerator as soon as the volume of the naked on the evaporator reaches significant sizes. Snezhnoy-ice thigh takes space inside the freezer, leaving less place For food, and the products themselves are frozen much slower. If you do not do defrost, it will start to grow up to such sizes that the door will not close. And it will only aggravate the problem.

Large layer of sleep worsens work and can lead to a breakdown of the refrigerator

How often you need to defrost

The defrost frequency directly depends on the amount of hollow ice in the freezer: the greater and faster it increases, the more often the refrigerator is required. Much depends on the model of the refrigerator itself, the intensity and nature of its operation.

Frequency defrost refrigerators of different manufacturers

The instructions are usually indicated, after which period the defrost is required:

1. Modern refrigerators with a drip or air-drip system, for example, Atlant, Indesit, it is necessary to defrost at least once a year.
2. Old Soviet aggregates - Minsk, Saratov - require more frequent defrost: once every 4 weeks. If the refrigerator is used not very actively, you can increase the period, but not less than once every two months in the summer and four months in winter.
3. In the refrigerators equipped with the NO Frost system, the defrost process occurs in automatic mode. Water passes to the rear wall of the device through a special drainage hole, and then evaporates from heat produced by the compressor. Specially defrosting such devices are not necessary. But sometimes it still has to wash and disinfect.

How to the frequency of defrost influence the features of the instrument operation

From how intensively the refrigerator is used, how it is done correctly, directly depends on how often it is necessary to defrost:

1. Frequent opening-closing of the door leads to the fact that inside the camera gets a large number of warm air that negative temperature Crystallizes in snow thief. The same result will be with too long opening the door. Try to first think what exactly you want to take, and then open the device and do it quickly. Do not wait for the beep.

   The refrigerator is difficult to work if the door opens often and for a long time

2. An increase in the snow layer contributes to the evaporation of moisture from food. It is necessary to store products in hermetic packages.
3. Penetration of warm air inside the refrigerator can be caused by a loose fit of the rubber seal, if he has lost its qualities. As a result, Ice thigh will appear very quickly. Correct the situation can be replaced by the part.

   Due to the poorly adjacent rubber seal, warm air penetrates into the camera, which worsens the equipment

If you operate the device correctly, but the snow cover is formed too quickly, you should seek help from a specialist in refrigerator equipment.

How to defrost

For most models, it is recommended to operate the device at an ambient temperature of 10-30 o C. The same temperature range. Experts are recommended to use when refrigerated refrigeration devices. Therefore, in the hot climate it is advisable to start defrosting in the evening when the air will cool down a little. Overnight, ice melts, and in the morning you can finish the process. So stages of defrosting:

1. Turn off the device:
   
2. Remove the products from the refrigerator. Here are some ideas, how to keep their quality while defrosting:
   
3. Extract all removable parts and fixtures from the refrigerator: trays, grills, shelves, containers, and so on. While the device will deframe, wash and dry them.
4. Wait until the refrigerator knows. It may take 3-10 hours, depending on the layer of land:
   • modern models have a special pallet for harvesting water;
   • in the Soviet refrigerator, place a bowl of the freezer, and there is a dry rag around the device around the device, because there will be a lot of water, and it will spread in all directions.
5. Manufacturers are not recommended to accelerate defrost, but if you really want to choose safe methods:
   • install the fan opposite the refrigerator so that the air gets into the chamber: ice melts faster;

     The fan can accelerate the refrigerator defrost

   • well copes with ice ordinary salt: Pour it on a saucer and put it inside the freezer or scatter on the surface of the ice source;

     The usual cook salt will help to clean the refrigerator from ice

   • the vinegar solution will not only accelerate the defrost, but also disinfected inner space Cameras: Ride the water vinegar in the ratio of 1: 1 and using a sprayer to apply a means to a snowy ice.

     Acetic solution will accelerate defrost and disinfected surfaces inside the refrigerator chamber

6. When the whole ice melts, wash the refrigerator. To do this, use soft tissue napkins or sponges, liquid means for dish washing. Do not use abrasive products - rigid brushes, cleaning powders. They will damage the inner surface of the chamber, leaving scratches on it. Rubber seal wash with soap solution and do not forget to clean the capacitor from the dust, located on the rear wall of the aggregate. It is most convenient to do this with a vacuum cleaner, but a small brush is also suitable. For the cleaning internal surfaces Use the instrument:
   • soda solution: Run 2 tbsp. l. Tools in 0.5 liters of warm water, stir well, apply with the help of a sponge to the surface of the chambers and leave for half an hour, and then rinse with clean water;
   • ammonia (with strong pollution, to eliminate unpleasant odor and disinfection): For one part of the alcohol, take 7-10 parts of the water, moisten a napkin in the solution and put on a dried spot, after half an hour, wash the chamber with plenty of water;

     Via ammona alcohol You can wash the strong contamination from the inner surfaces of the refrigerator and disinfected them

   • lemon to eliminate mold and unpleasant odor: add 2-3 tsp in a glass of water. l. lemon juice obtained by means wipe the walls of the chamber and shelves;

     Lemon copes well with the removal of mold and unpleasant odor

   • special products for hygienic cleaning of the refrigerator, for example, Hg with a sprayer.

     Special remedies for the refrigerator well clean the surfaces and are convenient to use

7. Pure washed refrigerator wipe dry with a soft napkin. After all, any moisture remaining inside the chamber will contribute to a new iceighnas.
8. After all the procedures, do not rush to immediately turn on the refrigerator, leave with an open door for half an hour. This time is enough to dry the water dried natural way.

The described method of defrosting is suitable for all models and types of refrigerators, for embedded and separate appliances.

The built-in refrigerator is defrosting the same way as separately

General defrosting and washing the refrigerator - video

Typical errors

1. Not often, but there are cases when the refrigerator is forgotten to turn off and begin to defrost. That is, open the door, get the products, sometimes even leave somewhere ... And at this time continues to push the temperature at this time.
2. An error that will be very expensive. It is categorically impossible to try to split the ice with any mechanical devices. The tubes of the evaporator are not durable enough, they can be sworn with ease, for a fork or something else.
3. The same applies to food or dishes, laid down to the lattice or plate of the evaporator. Any attempt to pull them can lead to a breakdown of the unit. Most best advice - Wait.
4. The disadvantage that is issued for dignity. There is a lot of information on the network, about how quickly and easily defrosting the refrigerator in 10 minutes. All methods are reduced to a forced increase in the temperature inside the chamber. For example, it is recommended to put a bowl of hot water in the freezer or blow the ice crust with hot air hairdryer. No one argues from hot water And air ice really melts very quickly. Although the device from such actions will not break immediately, but its service life will be reduced. Any temperature rise is able to damage the cooling system and freezing..

Refrigerating equipment manufacturers are recommended at high temperatures. ambient Install the air conditioner in the room for high-quality and long-term instruments, and not to blow them down with hot air. Heat For the refrigerator - no more than 30 o C.

For high-quality and long-term refrigeration equipment manufacturers recommend installing indoor air conditioning

How to turn on the device after defrosting

Everything is quite simple:

1. Turn on the refrigerator into the network, that is, insert the plug into the socket. Doors Close and do not download products yet.
2. In the control panel, set out the average value for the refrigeration and freezer. Press the superzarozka button. Flashing indicators will confirm the correctness of the actions. The refrigerator injected the temperature in the chambers without food.
3. Upon reaching optimal temperature Indicators go out. This event flashes that the products can be downloaded in the refrigerator chambers.
4. Old refrigerators who have no control panel, turn on and leave for 1-2 hours without loading products. During this time, the instrument will be able to gain enough cold. After that, it can be placed in it.

Over time, any refrigerator will have to defrost. Even the models with the NO Frost feature sometimes need it. Compliance simple rules will allow not only to update the cycle, but also provide qualitative work Device for many years.