The bed creaks what can be done. What to do if a wooden bed creaks


Any material changes its shape and characteristics over time, and accordingly, defects may appear in coatings and objects made from it. The bed creaks - how to eliminate this unpleasant, ear-piercing sound? This phenomenon brings a lot of inconvenience to household members, due to the fact that it is impossible to turn around at night without disturbing someone’s sleep. When finances do not allow you to update your sleeping place, the question arises of what to do to remove these unpleasant sounds.

Determine the cause of the squeak:

  • The first step is to remove the mattress with orthopedic bases from the bed structure and place them on the floor.

Important! An orthopedic base is a special base made of wooden planks - it is located under the mattress.

  • Check if the mattress is squeaking. You need to make sure that this mattress is not a source of unpleasant squeaking before you move on to checking the frame of the sleeping place itself. You need to get on the mattress and move around a little. If creaking is heard, then it is caused by the mattress.
  • Check for squeaking orthopedic base. You need to press on it from above and try to shake it. If you hear a squeaking sound, most likely it is this that is causing all the problems.
  • Shake the legs of the structure and listen carefully. An unpleasant sound often appears where the butt joints between the legs and the rest of the frame are located.

Important! You must try to find the exact place where the creaking comes from.

  • Rock the support strips from below on the inside of the structure frame. Support strips are usually made of wood or metal. They are always located at a certain distance from each other and stretch from one side of the frame to the second. An orthopedic base with a mattress is later laid on the slats. You need to press down on each support bar to see if they make an annoying sound.

Important! Very often, the cause of a squeak is caused by the friction of one wooden part against another.

Eliminating the squeak

So, now you can answer the question of what to do if the bed creaks. To save your sleeping place from creaking, you need to follow this algorithm:

  1. Take it all necessary tools for further work with the part of the bed that turned out to be faulty. You need to look at exactly how the butt joint of the bed frame is arranged, and at the place where the sound comes from. If in your case the fastening is on screws, you need to take a screwdriver the right size. If it is bolted, arm yourself with a wrench.
  2. Tighten the butt joint that is making the noise. Often the main cause of bed squeaking is weak fastenings in the butt joints. Before disassembling the frame, you need to tighten the screws and bolts in those places where the unpleasant sound is coming from.
  3. Use a washer if there is any difficulty with the bolt not being fully tightened.
  4. Completely disassemble the butt joint if the bed still creaks. Use your tool kit to unscrew and remove any bolts or screws that hold the parts together. They put the removed ones in a separate place so as not to accidentally lose them. Separate the frame parts that are included in the problematic butt joint.
  5. Lubricate all butt joint elements. Apply lubricant to the surfaces of the two butt joint parts touching each other. The following will be listed best views lubricants for this purpose:
    • Paraffin is a waxy substance that comes in the form of bars. They are easy to rub on the parts you need.
    • WD-40 is an aerosol lubricant suitable for use on beds that have metal frame. The only downside is that it can dry out over time.
    • To remove bed squeaks, you can use candle wax. They need to rub the parts being processed.
    • Silicone grease. You can purchase it at a hardware store, and then use it to treat all problematic elements of the butt joint - this way you will get rid of squeaking for a long time.
  6. Reassemble the bed frame. Return to their places all the parts that were unscrewed, tighten all the bolts and screws.

Important! You need to make sure that all fasteners are tightened tightly to prevent them from making more noise later.

  1. Check to see if the squeaking has stopped. Try rocking your sleeping area to see if any annoying sounds remain.

We fix problems quickly

Creaks wooden bed— what to do if you cannot repair it yourself? Below will be written a few useful tips to solve this problem:

  1. Pad the frame support strips with unnecessary clothing. The fabric will prevent the orthopedic base or mattress from creating friction with the bed frame.
  2. Use cork sealant to fill excess gaps in wood frame bed frames.
  3. Place a towel or other fabric under the uneven legs of the bed to prevent it from rocking and making unnecessary sounds.
  4. Place a book under the mattress near the source of the squeak. If the annoying sound comes from the support bars, it is necessary to remove it from sleeping place mattress with an orthopedic base, then place the book on the creaking bar. After this, you need to return the orthopedic base and mattress to their place.

Wooden furniture is different high quality production, long service life and luxurious appearance. However, even such household items fail over time for various reasons and begin to present unpleasant surprises to their owners. Considering this, many are interested in what to do about it if a wooden bed creaks and how to fix the problem.

Related articles:

Causes of squeaking at the bed

If your bed creaks, you shouldn’t despair. This problem can be easily fixed. Even a person far from construction can cope with this process. The main thing is to immediately determine the location of the squeak and understand what its cause is.

In order for the search to be successful, it is necessary to free the bed from all objects, including the mattress, and use force to shake and push through all the parts (legs, back and foot, base, etc.). A superficial inspection will tell you where the sound is coming from. Then all that remains is to more carefully examine the squeaky area and understand the exact location of the friction. Most likely:

  • connecting parts of the base at the corners;
  • places where the legs connect to the frame;
  • any of the connections of the slatted or slatted base;
  • places where the legs touch the floor.

The reasons why a wooden bed creaks almost always come down to one thing - the material has dried out, cracks have formed at the joints, and adjacent parts begin to rub against each other. The problem becomes especially pronounced if wet raw materials were used during production. As a result, even the purchased bed can creak.

Another common cause of an unpleasant sound can be wear or loosening of the fasteners.

If, after examining the piece of furniture, the creaking does not manifest itself in any way, then the cause must be looked for in the mattress or in the places where it comes into contact with the wooden base.

Once the location of the squeak has been detected, you need to determine a method for eliminating the problem and understand what to do if a wooden bed creaks.

Determining the source of the squeak

To quickly find the source of unpleasant sounds, you need to ask someone close to you for help.

First you need to simulate night sleep: lie down on the bed, turn over different sides, and the assistant at this time will listen to the place of origin of the sounds.

If a wooden bed creaks when a person moves in a lying position, then the source may be the joints of the legs and the base of the frame, also corner connections sun lounger Problems can also arise in wooden planks. Even unused slats that are not screwed securely will begin to creak from the first day.

An uneven floor causes the legs to constantly shift, producing an unpleasant grinding noise. Old floorboards may creak, and the sound may seem to be coming from the bed.

If, after a long search, we couldn’t find anything on the furniture itself, we move on to the mattress. Since he’s just lying on the floor at this time, let’s lie down and try to detect extraneous sounds inside him. This means the problem is in the springs.

The final source of squeaking is where the mattress meets the base of the bed. To detect it, you need to return the mattress to its place and carefully roll on it. The source of the noise cannot be detected immediately, but only after the mattress is installed in the position that is problematic.

After all search methods have been implemented, you need to start last stage– eliminating the creaking of a wooden bed.

Remove squeaks without disassembling the bed

The easiest way to eliminate the creaking of a wooden bed is to create a soft pad or strong support. You need to insert a soft object into the space between the headboard and the wall. Sometimes this helps soften the contact between two hard materials. On the free side, you need to support the foot with a chest of drawers or a heavy stand. This will help fix the furniture in the desired position and prevent its movement.

Such actions do not always help and do not last long. Therefore, to prevent the bed from creaking, you will have to use tools.

First, the fastening elements are tightly tightened using open-end or adjustable wrenches or screwdrivers. Most often, access to them is carried out without disassembling the furniture, but sometimes additional fastening in the form of metal corners and gluing joints may be necessary.

Don't neglect intermediate method lubrication in the connection of the frame, legs, headboard and foot. Even if it is not needed now, such processing will not be unnecessary.

It is necessary to consider how to get rid of bed squeaks if the cause is worn slats. First you need to swap the central and outer elements to relieve the stress on the tired wood. If this does not help, you will have to change the lamella.

Dismantling the bed

The most radical method of eliminating the creaking of a sleeping bed is to completely disassemble it and process each part separately. To do this you will need the following tool:

  • wrenches and screws;
  • screwdriver set;
  • screwdriver or drill;
  • brushes, rollers, sandpaper;

Important: you need to immediately prepare the necessary mounting consumables, metal corners, rubber glue and lubricants (wax, paraffin, soap, ski or graphite grease, etc.).

In order to easily unscrew the fasteners, you must first understand which of them are used:

  1. Planks with hooks or a special bed tie can be disassembled by simply detaching the parts from each other.
  2. The screw coupler is intended for end connection. Consists of a screw and a nut. Unscrews with a hex key.
  3. The canonical tie is unscrewed with a Phillips screwdriver.
  4. Euroscrew fastening is a metal screw screwed into a pre-prepared hole. Removable with a hex wrench.
  5. Connections using dowels or wooden cartridges coated with glue are more difficult to remove. To do this, you need to gradually insert a thin object (a screwdriver or the end part of a knife blade) into the gap between the fastened parts and move them apart until the entire dowel appears outside. Then its free part is grabbed with pliers and pulled out.

Disassembling the bed begins with removing the footboard and headboard. Then you need to disconnect the base from the frame. If necessary, disassemble the components themselves, detach the slats, legs, etc.

As you disassemble, carefully inspect all fasteners on the bed. If a damaged thread is found, the screw or bolt is replaced with another one. It is recommended to replace the removed dowel.

To create a strong, unified structure, before assembly, all parts and joints are treated with rubber glue. Before gluing, it is recommended to degrease the wood surface.

What do you do with old furniture?

Poll Options are limited because JavaScript is disabled in your browser.

Over the years, the place most conducive to calm and healthy sleep, can be a source of irritability and discomfort. The source of such inconvenience is a wooden bed, which during operation begins to make creaking sounds.

Nowadays, buying high-quality wooden beds in Moscow is not a problem, but over time they can also cause trouble.

The creaking can disrupt own dream, and can also disturb the sleep of family and even neighbors. So we have to fight with everyone possible ways with this seemingly minor, but at the same time unpleasant problem.

First of all, you need to find out what could be causing the squeaking.

Causes of squeaking

The main culprits for a squeaking wooden bed are deformation of the wood and loose fasteners. Due to the displacement of two parts relative to each other, friction occurs, which is the cause of the squeak.

To determine the source of the squeak, you need to disassemble the bed, that is, remove the mattress on the floor and, moving along it, carefully listen to whether it makes sounds. It may not be the bed itself that creaks, but the springs of the mattress.

After making sure that everything is in order with the mattress, you need to check the bed frame. Sources of unpleasant sounds can be:

  • fastening connections;
  • slats on which the mattress rests;
  • loose legs.

After identifying the cause of the squeak, we will try to eliminate it.

The first thing to do is check and properly tighten the fastening connections. For more reliable fixation, metal corners are installed on them.

Lubricating the joints with paraffin, silicone, grease or soap can eliminate friction of parts. You need to be careful so that the furniture does not lose its appearance.

Very in a good way To eliminate squeaking, first degrease and then glue the joints of the parts with elastic glue. It is better not to use the bed for a day so that the glue dries completely and the maximum effect is achieved.

The slats that make up the base of the bed, due to heavy loads, quickly become unusable and can creak.

There are several ways to get rid of this:

  • lubricate the lamella with paraffin;
  • rearrange the slats;
  • replace the slats with new ones.

The most severe case is getting rid of squeaks caused by loose bed legs. Both repair and replacement with new ones are difficult.

Often the only way to get rid of annoying sounds is to remove or saw off the legs of the bed. This is also the reason why many furniture factories They started producing beds without legs.

How to get rid of a squeaking bed, watch the video:

05/30/2018 0 6,639 views

Why can a bed creak, and what should its owner do in this situation? How to eliminate an unpleasant sound and identify the main causes of squeaking?

Sound sleep is the key to a productive day. During rest, strength is restored and absorbed nutrients and energy accumulates. However, certain circumstances can disrupt the quality of your sleep. One of the negative factors can be a malfunction of the bed. Poor quality of the mattress or the furniture itself not only affects sleep, but also leads to health problems.

Reasons

Before you start to deal with the problem, study the possible causes of its occurrence. Many of them are associated with a long period of use of the bed. Over time, the wood from which the frame and base are made begins to dry out. The mattress also becomes faulty and loses its former quality.

However, even a new bed can cause grinding noise. This indicates its improper assembly or poor quality materials. To more accurately determine the source of the annoying sound, you should take a closer look at the following things:

  • Mattress. In most cases, springs creak when they are not isolated from each other. But not only spring mattresses can become a source of unpleasant sound. Poor quality polymer in an all-polymer model leads to grinding noise.
  • Lifting mechanism. The reason may be weak fasteners (heaviness and sudden movements of people on the bed are the reasons for weakening of fastenings), or a malfunction of the spring unit.
  • High legs. Occurs at the junction of the bed frame and legs. And the higher the legs, the greater the risk of squeaking.
  • Support strips. They are lamellas that make up the base of the frame. They contain an orthopedic base and a mattress. One of possible reasons grinding - touching parts.
  • Slatted base. Wooden slats that are attached to the frame. Most often, the unpleasant sound comes from the place where the support bars are attached. In addition, wooden parts tend to dry out.

Determining the source of an unpleasant sound

  1. Pull out the mattress. Place it on the floor, sit on it, then walk around. If you hear a sound, you can safely assume that the problem is a malfunction of the mattress.
  2. Rock the bed without a mattress. If no sound comes out, then the mattress is causing the squeaking. However, there may be more than one sound source.
  3. Check the slatted bottom. Press on each wooden slats and listen to which one makes the sound.
  4. Rock the bed frame. A grinding sound indicates poor fastening or faulty frame materials.
  5. Check lifting mechanism. If this is the source of sound, it is recommended to check the connection to the frame. For wooden devices There is also a drying problem.
  6. If you still haven’t identified the cause, and the bed still squeaks terribly, contact a specialist.

What to do if the frame creaks?

Creaking is typical for wooden frame, the parts of which dry out over time. And if you do not eliminate the problem from the very beginning of its appearance, then the gaps that form due to dryness will become even larger. Consequently, the creaking will begin to irritate even more and more often.

Therefore, you can simply tighten the fasteners. After tightening, it is recommended to use silicone lubricant. It will reduce friction between parts. If you don’t have any special lubricant at home, regular one will do paraffin candle.

Eliminating mattress squeaks

First, check if the mattress is lying flat. Even such a stupid reason can cause a grinding noise.

Inexpensive mattresses with spring filling are characterized by the problem of spring contact. Friction leads to an unpleasant sound.

The cause of sound in an all-polymer mattress is the poor quality of materials. A faulty mattress should be replaced immediately.

If you don't have a lot of money, pay attention to well-known inexpensive furniture stores. Ikea is famous for its affordability and originality. design solutions. If the purchase was recent, contact the manufacturer for warranty information. In this case, you are required to return the money or replace the defective product with a working one.

What can I do to prevent the frame and slats from creaking?

If you find a problem with the frame, start your inspection with the slats. They need to be checked for chips, cracks and other integrity problems. If damaged, they should be replaced.

The most in a fast way To get rid of the squeaking of the support strips is the backing of the book. If this method does not help, cover the slats with old clothes; thanks to the fabric, there will be no friction between the frame and the base.

If you are convinced that the lamellas are undamaged and the lattices are in good working order, you should pay attention to the screws. After tightening the screws, you need to lubricate the creaking bases with silicone grease.

Video: how to get rid of a squeaking bed?

Prevention

If you are lucky enough not to encounter such a situation, this does not mean that you do not need to do anything. It is always easier to prevent a problem than to eliminate it.

  1. Of course, the quality of the bed and mattress itself directly affects the occurrence of squeaking. Therefore, when purchasing, you should pay attention to the quality certificate. An unsuitable mattress or broken bed not only leads to annoying rattling noises, but also to health problems. It should be noted that polymer mattresses have a lower risk of malfunctions. When choosing, you should pay attention to ventilation, because it can become moldy.
  2. It is better to choose wood or metal as the frame material. They last longer and cost less. The density of a chipboard frame is lower, therefore, there is a greater likelihood of deformation under high gravity. If the bed is wooden, then varnish its frame to prevent the wood from drying out. Regarding the type of wood: it is worth taking a closer look at durable species such as oak, mahogany or rosewood.
  3. Pay attention to each lamella, it should not wobble or dangle, all screws and screws must be in place.
  4. At self-installation bed, pay attention to the evenness of the surface. If the distortions are strong, then it will become unusable ahead of time. Uneven pressure on the frame leads to misalignment of parts.

How to get rid of annoying bed squeaks yourself?

5 (100%) 1 votes

12 Feb 2017 18 Mar 2017

Despite all its advantages, wooden furniture will sooner or later show its character... It's about about the creaking. And if a table in the living room or another piece of furniture that you don’t use very often begins to creak, then you can pretend that everything is fine. But when the bed on which you have to sleep every night begins to creak, the problem takes on almost catastrophic proportions: you can’t get a good night’s sleep, romance doesn’t go well, and the rest of the household starts thinking about earplugs... Unless your plans include buying new ones bed, then it will be useful for you to know how you can eliminate annoying wooden creaks.

Action plan

The first thing you should do before proceeding directly to eliminating the squeak is to determine the cause of the unpleasant sound.

There are only two main reasons: weakening of fasteners and the natural process of wood drying out. But still, the first reason is more common, if, of course, we are talking about a bed made of wood processed according to all the rules. Creaking is the result of mechanical friction between two pieces of furniture. To determine which parts wooden furniture make a squeaking sound, the mattress should be removed from the bed. After this, you need to carefully shake those parts that cause suspicion: first of all, these are the legs, slats under the mattress and fastening points.

The simplest thing you can do is to thoroughly tighten all existing fasteners and after this manipulation lubricate the joints of the two wooden parts glue (preferably carpenter's glue, but in extreme cases you can use any other). After gluing, you will be able to use the bed for its intended purpose no earlier than 24 hours later. But if the bed is no longer new and the fasteners have become rusty, then it is unlikely that they will be tightened. Then it is recommended to install metal construction corners on the back side of the bed frame.

You can go the other way: lubricate all joints where friction is detected. If you want to approach the issue of eliminating unpleasant sound professionally, then buy in advance from hardware store special silicone or graphite glue. But, as practice shows, you can use a paraffin candle, soap, salidol and even starch as a lubricant with the same success as an expensive spray.

Creaking sounds that are “localized” in the legs of the bed are more difficult to eliminate: here you either need to try to fix them more securely on the floor (this is relevant here old-fashioned method- use of a gasket between the floor covering and the leg), or replace with new ones, which is very difficult to do on your own. If possible, you can pay a specialist to replace the legs. Or you can, as is happening most often now, remove the “legs” of the bed altogether and turn it into a chic floor podium bed.

Now about the mattress slats. These are the transverse slats that bear the main load of the body weight of the owner of the bed. If they are the ones that creak, then the solution may be to replace the slats with new ones, or, alternatively, the slats can be swapped. More durable (and therefore less squeaky) are the slats located under the headboard and at the foot of the bed. They can be pulled out and swapped with those installed in the middle of the bed.

Such manipulations usually solve the problem of a wooden bed squeaking. But if this does not help, then there is reason to think that it may not be the bed that is creaking, but spring mattress(especially if it is not very new). I also had a case in my practice when a client followed all my recommendations, even changed the mattress, but the bed continued to squeak. Why? It turned out that it was not the furniture or the mattress that creaked, but... the floor. Yes, the wooden floorboards on which the bed stood creaked. Therefore, in order not to do a bad job, just in case, check for squeakiness flooring under your bed!