Thermal curtain kev 6p2211e. Add product to cart


The main purpose of thermal curtains is to protect premises from cold air penetrating through open openings. The density of cold air is higher than that of warm air, therefore it is heavier. A so-called “gravitational” pressure difference arises between the street and the inside of the building. The pressure in the building at the opening level is lower than outside. Outside air flows into the open opening, squeezing the internal air out of the room. At the same time warm air may leak through top part the same opening or through other elements (aeration windows, ventilation shafts, other openings, leaks in windows, vents, etc.). A similar situation occurs in the open opening of a refrigerator (or freezer) chamber: cold air flows out of the chamber at the bottom, and warm air rushes in through the top of the opening.

Thermal curtains Teplomash KEV-6P2211E are of the mixing type. Mixing type protection does not create resistance to rushing cold air. The heated jets of the curtains intensively mix the cold flow, increasing the temperature of the mixture to the required temperature. Typically, mixing-type curtains are installed in the vestibule.

The approximate selection of curtains is often made according to the “effective jet length”. It should be remembered that this characteristic of the scale of the curtain's action is only suitable for “mild” outdoor conditions. You can find out more detailed information about the operation of the device in “harsh” environmental conditions, as well as buy a thermal curtain Teplomash KEV-6P2211E by contacting

Full description

Electric thermal curtain Teplomash KEV-6P2211E comfort series

The main purpose of thermal curtains is to protect the room from cold air penetrating through open openings. Thermal curtain Teplomash KEV-6P2211E is a compact thermal curtain for medium openings with a height of 2.0 to 2.5 m. It serves as an additional source of heating in public spaces, offices, shops, cafes and restaurants.

Specifications:

Electric heat source Yes
Power supply parameters, V/Hz 220/50 (380/50)
Power modes, kW * / 4 / 6
Air consumption, m 3 /hour 800 / 950 / 1100
Air speed at the nozzle exit, m/s 7
Effective jet length, m 2,5
Air heating at maximum power, °C
maximum flow
minimum consumption

16
22
Dimensions, mm 1040 x 250 x 225
Weight, kg 14,5
Maximum current, A 28 (9,5)
Motor power consumption, W 100
Sound pressure at a distance of 5m, dB(A) 52
Number of curtains connected to one control panel, pcs. 6


Design

The thermal air curtain is made of sheet steel coated with high quality polymer coating. Fans and heating elements. With the help of fans, air is sucked through the front perforated wall of the housing, passes through electric heaters, heats up and is discharged through the grille in the form of a narrow directed jet. The curtain is controlled from a remote control panel (included in the kit).

Peculiarities:

  • front panel made of perforated painted galvanized steel (stainless - upon request)
  • heating source - electric heating element
  • 2 remote controls included - wired and wireless
  • Wall brackets included in delivery
Guarantee

Warranty for thermal curtains 2 years.


NPO Teplomash is the leader in the Russian heating equipment market. The plant has done a lot for this: guarantee and reliability, high technical specifications and affordable prices. The model range is regularly updated, new products have modern appearance and quality filling. Benefits of purchasing air-thermal curtains Teplomash:

  • Developed service network, reliability and long service life
  • Wide model range solves any problem
  • Favorable price and low operating costs

Features and benefits of the 200 Comfort series

Modern stylish design. The air-thermal curtain has a durable body made of galvanized steel coated with a high-quality polymer coating. Perforated front panel The device is made in white and light gray. The curtains have a high degree of corrosion protection, which allows the equipment to be installed in rooms with relative humidity air up to 80% at a temperature of 25°C. Finned electric heating elements are used as a heat source; the design of the curtain provides protection for electrical components from overheating. Thanks to the top air suction, the front panel of the Comfort series air curtains always remains clean. The optimal fan shape ensures low vibration levels.

Where is the KEV-6P2211E air curtain used?

This curtain is intended for vestibules entrance groups, window protection and doorways height from 2 to 2.5 meters, and also as an auxiliary heating source. Due to their compactness, these models can be placed in limited space, for example, customs pick-up windows, security guards, fast food cafes, kiosks and shops.

Controls and operating modes

The curtain is controlled by two remote controls to choose from: wired and remote. The main modes are heating (4.0 and 6.0 kW) and ventilation (without heating). The control panel allows you to regulate the required air temperature near the opening and regulate the performance, as well as the power of the curtain. Up to 6 curtains can be connected to this control panel.

Basic requirements for installation and operation

The 6P2211E air-heat curtain must be installed in a horizontal (vertical) position above the doorway closer to the top edge. Installation is carried out on special fastenings located on the device body itself. The distance to the ceiling, which must be at least 30 cm. The wire and plug are not included in the kit; the supply voltage is supplied to the terminal at the rear of the case.

  • circuit breaker 32A / 13A
  • network cable cross-section 3x4.0 mm 2 / 5x1.5 mm 2
  • power supply 220 V / 380 V

Why should you buy from us?

1. Consultation and selection of equipment by an expert.

2. Order support by a personal manager.

3. Warehouse and office in one place for 10 years.

4. Payments including VAT, card, cash.

5. Official guarantee throughout the Russian Federation.

6. Prompt delivery using our own transport.


What is standard installation?

Standard installation of a wall split system includes the following features:

  1. The length of the route between the blocks of the split system is no more than 5 meters;
  2. Inter-unit communications indoors (from the indoor unit of the air conditioner to the hole in external wall) are covered with decorative plastic box(without gating routes);
  3. The external air conditioner unit is installed under the window using standard brackets;
  4. Electrical power is supplied “to the outlet”;
  5. The drainage goes outside.

Installation is possible with free access to the section of the wall of the room where the indoor unit air conditioner

In addition, it is necessary to be able to fully open the window through which the outdoor unit is planned to be installed. U

install external unit from 5.5 kW of power at a height of three meters is only allowed

with the participation of an industrial climber, whose services are not included in the cost of installing the air conditioner.

With more detailed cost information installation work You can check it out.


Russian thermal curtains from Teplomash appeared on the market several years later than Tropic equipment, but at the same time they are in good demand due to a reasonable pricing policy, thoughtful design and good...

Type: electric Purpose: household Installation: universal Thermal power(kW): 6 Electrical power consumption (kW): 0.1 Voltage (V): 220

The thermal curtain of the Teplomash brand 200 E KEV 6P-2211E is a highly efficient device designed for installation above openings whose height is in the range of 2-2.5 m. The equipment is used to block the street cold, maintain a comfortable microclimate, and save on heating the facility.

The device is distinguished by reliability, long-term operation, modern design, allowing you to install the curtain in any room, regardless of the interior. The Teplomash 200 E KEV 6P-2211E device shows efficiency in shops, small warehouses, and offices. Using the equipment alone or in conjunction with similar devices, you can significantly save on heating.

Functional Features

  • universal installation - horizontally above openings, vertically on the side;
  • a remote control, equipped with a monitor for displaying indicators, serving as a transmitter for the remote control, from which you can control the device from any distance. Up to six air curtains can be connected to the remote control;
  • switching off the heating elements when the air curtain body overheats;
  • reliable tubular heating element with fins of increased area;
  • the ability to use the curtain as a fan in the summer season;
  • durable steel case with stainless steel properties, polymer coating that protects against corrosion;
  • powerful fan.

From the remote control you can set the power, fan speed mode, and heating temperature of the exhaust air. The device features a minimal noise level that does not cause discomfort to visitors or staff. Using Teplomash 200 E KEV 6P-2211E curtains, you can achieve significant savings while simultaneously creating a comfortable microclimate during the winter season.