Of all the floor coverings that can be found on sale today, linoleum is the easiest to damage. Trouble can happen while moving furniture or as a result of careless handling. In any case, damaged linoleum needs repair. Surprisingly, fixing linoleum is not difficult. The main thing is to find a suitable fragment for the patch.

Patch material

As a rule, all materials for flooring (however, this applies to all finishing materials), they buy with some reserve. This stock is then stored on the balcony or in the pantry. If such a supply of linoleum has been preserved, then this is an ideal case and you can get to work.

If there was no extra piece of linoleum, then a problem arose - where to get it?

First, you can look for it on sale. For example, in markets and online stores.
Secondly, the patch can be made from similar linoleum. There is also an option when the patch is cut out of linoleum, which is located somewhere under massive, stationary furniture. After all, the floor in this place is hidden from view anyway.

How to glue damaged linoleum

In addition to the material for sealing damaged linoleum, you will need glue. PVA or Moment glue is quite suitable. You can also try other types of glue. The most important thing is that they are not too aggressive and do not melt the material.

How to correctly cut a patch from linoleum

To ensure the best results, it is important to cut the workpiece correctly. There is only one way to do this efficiently and accurately. First, place on top of the damaged linoleum new material, and then using a blade or a sharp wallpaper knife, cut out a circle or some other geometric figure immediately through two layers of linoleum. This is the only way the patch will fit perfectly into place, without the slightest gap.

To make the patch invisible, you need to take into account the pattern on the linoleum. It should match perfectly on the patch and on the linoleum. In addition, you can try cutting the patch itself along the lines of the ornament. In this case, the patch will be truly invisible. Of course, this will still depend on the design or design, however in most cases, cut out the patch complex shape, focusing on the lines of the ornament - the ideal choice.

How to glue a patch to a damaged area on linoleum

After this part is completed, the old, damaged piece of linoleum is removed and the patch is set aside for a while. It is necessary to wash and scrub the floor under the linoleum so that the grip is as good as possible. Glue is applied to the clean floor. The glue is spread well over the entire surface, after which the patch is carefully inserted and pressed.

In order for the patch to stick properly, you need to place a weight on top of it for two days. To do this, you can take a bucket of water or a large saucepan. A large stack of books and, in general, any massive load that can be found at hand will also do.

The main thing is that this load is installed on flat surface. That is, first you need to put a large book, fiberboard or plywood on the patch, and then the load itself is placed on this base. After two days, the load can be removed, and the linoleum will be ready for subsequent use.

Conclusions

As you can see, making a patch is not at all difficult. Moreover, the patch should not be conspicuous. If the work is done carefully, it will hardly be noticeable unless you know exactly where it is. The main difficulty in this work is to find suitable material for a patch and qualitatively cut the patch itself for linoleum sharp knife.

Linoleum often gets damaged during use. To restore it, you do not need to call specialists. There are several ways to seal linoleum if it is torn. This will help you save a lot of money and time, because you won’t have to completely change the flooring.

Types and causes of damage to linoleum

Linoleum - pretty soft material: despite its thickness, it is prone to mechanical damage. Typically, holes, tears, abrasions and other defects are formed if the coating is laid according to uneven floor. Linoleum cannot fill all the pores and voids, so when walking on it problem areas the material becomes thinner. While PVC linoleum can “resist” tearing longer, thin natural flooring breaks faster.

Tears and torn holes can also appear under the following conditions:

• piercing the heel of a shoe;
• gradual wear and tear from furniture legs near the walls or in the middle of the room;
• cutting with a knife due to careless actions.

Violation of the coating laying technology makes damage to its surface even more likely. When gluing onto a layer of glue that is too thin or thick, the latter will turn out uneven and insufficiently elastic, and defects may appear in some places. If the flooring is laid on a damp base, it quickly peels off and becomes damaged, swelling with waves. The appearance of folds inevitably provokes cracks.

Another option for damage to linoleum is the divergence of seams if the material was laid in several strips. This usually happens when joints are sealed poorly. The coating can also be burned through - this is usually observed when a cigarette or coal from a hookah falls. Burns can be superficial or through; the latter are more difficult to repair at home.

Tools and materials for work

To repair cuts and holes, you will need a number of tools. The main one is a knife. It should be sharp, durable, you can take a stationery or painter's one. Also on sale special knives for linoleum:

• universal - used for cutting fabric in a straight line, easily straightens frayed edges, edges, cuts even round patches, can have replaceable blades;
• retractable reinforced - equipped with a non-bending blade, a reliable and comfortable handle, it cuts multi-layer coatings well straight and at an angle;
• disc - has a sharp round blade, cuts straight and curved, helps to make patches of irregular shape;
• month-shaped - thanks to the curved blade, it corrects cuts and removes hangnails, trims seams.

You may also need other tools for repairs - a spatula or glue brush, a roller (rubber, thick), a pencil or marker, an iron ruler. From consumables Pieces of material with the same pattern, the same color (for cutting out patches), and special glue help to repair the torn area. When purchasing, be sure to save pieces of linoleum - this will help make repairs without problems. In addition, to fix the canvas you will need double-sided masking tape or stickers, and for gluing with hot-melt adhesive - a hair dryer. The following types of adhesives are used in linoleum repair:

• boostilate;
• acrylate;
• polyurethane reaction;
• cold welding;
• mastic;
• polymer putty.

In order for the glue to color the linoleum, the latter is cut into crumbs, having first removed the backing. Pour the material into glue, after dissolution the product will serve as a pigment. You can also buy a suitable pigment in the store and paint the glue yourself.

Repairing minor defects

Small cuts and cracks are the easiest to repair, but many people choose not to do this. Indeed, they are almost invisible on the surface, do not stand out, and do not interfere. But over time, dirt and dust will begin to clog in them, the edges will begin to fray, and the hole will expand. Therefore, you must immediately choose suitable way and seal the hole.

How to fix minor defect on the cover? Here is a list of suitable funds:

1. Mastic. Sold in the form of paste, pencil, and a variety of colors.
2. Cold welding. Reaction glue allows you to quickly and reliably eliminate any defect. Melts the PVC coating, creating an even, invisible seam.
3. Sealant. It is advisable to purchase a woodworking product by selecting desired color, it will eliminate minor defects.

Scuff marks can be removed using linoleum wax. Shallow damage can be easily rubbed off with this composition. This should be done with the edge of a coin, then treated with a cloth until a glossy surface is obtained. You can also cover up scuffs with mastic or polish. Before repairs, be sure to clean the floor covering from dirt and debris and dry it well. If necessary, degrease the area.

How to seal a small through hole? It's best to make repairs cold welding, this method is suitable for gluing gaps up to 3–4 mm, but compositions for larger cracks are also commercially available. Painting tape is glued to the area around the defect for protection, then glue is applied using a thin spout. Once the surface melts, the hole will disappear. As it hardens completely, remove the tape and cut off excess glue with a sharp knife. You must work with cold welding carefully, such products are toxic. It is necessary to use a respirator, gloves, and ventilate the room well.

You can also glue small cuts and tears with a homemade product:

• melt half a kilogram of rosin powder in a water bath;
• cool the mass to 50 degrees, add 150 ml of alcohol, 100 g of castor oil;
• tint the mixture with pigment;
• Using a syringe with a needle, inject glue into the defect area and wait until it hardens completely.

Repair of a burnt area

Smokers and hookah owners often encounter similar problems with linoleum. It is imperative to determine how deep the burn has spread. Here is the repair procedure depending on the complexity of the damage:

1. A hole in the protective (top) layer. Clean the stain area by removing burnt particles. Take a coin, carefully apply mastic and smooth it with its edge.
2. Burn through the pattern and PVC layer. If there are dark edges and white, macular spot in the center you need to use cold welding. If the coating is new, type A adhesives are used; with an old coating, type C glue is used. Carefully lubricate the burn area with the product and wait until it melts.
3. Through-burn. In this case, stickers on linoleum from burns or patches are used. They are fastened using cold welding in the same way.

Repairing large gaps

If it happens that the material is severely torn, cut, or drilled (for example, your hand trembles while assembling furniture), you will have to carry out more serious repairs. Sealing with mastic will not help when the holes are larger than 1 square meter. see. You will have to glue the damaged area with a patch. Step by step instructions is given below:

1. Choose a piece that matches the design flooring. The pattern should match what was in the hole area. Before attaching, the patch is carefully measured, aligning it with the main fabric.
2. Place the patch on top of the hole so that its edges are slightly larger than the size of the defect, and attach with masking tape on all sides for reliable fixation.
3. Cut through both layers of material with a sharp knife, it is advisable to do this in the shape of a square or rectangle.
4. Remove the tape, remove all trimmings, and remove the patch. The damaged and cut piece of linoleum can also be removed by tearing it off from the base.
5. Apply cold welding to the cleaned surface and lay the patch. Iron it well so that there are no air bubbles left. You need to glue the patch, finally aligning the pattern.
6. Roll the set piece with a roller, then remove the remaining glue with a damp cloth.

Do not walk on this flooring area for 24 hours. Then it will be ready for use. What if a piece is partially torn out, but retains its adhesion to the main fabric? In this case, repairs are easier to carry out. It is necessary to straighten the flap (iron it through the fabric), clean it from dirt, and apply a layer of glue to the base. Next, glue the flap using cold welding in the same way. You can also use gluing liquid nails, bustylate, special glue for PVC linoleum.

Restoration of joining seams

It happens that the seams between layers of material diverge. If such a joint is located in the area of ​​a door, near a wall or under furniture, it can be easily covered with a decorative strip (threshold). Sometimes this is not possible - for example, when the seam runs in the center of the room.

Sealing of seams is possible using hot and cold welding. Hot way can only be carried out by professionals; to perform it you need special equipment and skills. A special PVC cord is heated and applied to the joint. Even beginners use cold welding at home:

• pull one strip of material as far as possible so that it overlaps (at least 2 mm);
• attach metal ruler or bar, draw a stripe with a pencil;
• make a cut along the strip;
• fill the seam with glue using a thin tip or syringe;
• After the cold weld has hardened, cut off the remaining glue.

Removing waves and bulges

Swelling of linoleum always means a violation of its laying technology. The easiest way to get rid of waves along the edges of the material is to remove the baseboard, move the layer, reducing the gap between the wall and the flooring. The coating can also be cut from the appropriate side to the required size. The material should be left without fastening for 2 days, and after straightening it, fasten it again with a plinth.

If you find swelling in other places, you will have to pierce the bubble. They do this with a needle, then release the air and smooth it with their hand. The hole must be filled with linoleum glue through a syringe, and press the area with a weight. If the bubbles have large size, you have to cut through the material with a blade, remove its excess, and then seal the seam with cold welding. It is better to immediately devote time to the quality of laying linoleum, so as not to carry out renovation work. If such a need arises, problems can be solved quickly and inexpensively.

Linoleum is a coating that must be handled quite carefully, so over time, many people face the question: how and what is the best way to seal torn linoleum. There are several possible answers, but the most common is to use cold welding for linoleum.

Which cold welding method is best for gluing linoleum?

Cold welding is a special liquid or gel based on polyvinyl chloride and various solvents. It slightly dissolves the touching edges of the linoleum and thus fuses them.

It usually comes in small tubes and comes in three types: A (liquid form for bonding joints), C (thicker, for repair and filling narrow cracks) and T (for gluing multi-component linoleums based on polyester and PVC). Most often, tubes are equipped with a screw-on spout or a needle for applying glue. The needle is convenient for gluing straight joints, but any tip will do for repairing a tear.

You should not rush to buy expensive glue, for example Werner Muller at a price of 450 rubles per tube. In terms of their composition, they are almost all the same. You can easily purchase any other one three times cheaper than the above.

How to glue

So, before starting, you need to prepare the seam or gap for gluing. Remove dirt and wipe. The areas to be glued must be dry.

For gluing we will need a tube of cold welding, masking tape and a knife.

After cleaning the linoleum, the tears should be sealed with strips of masking tape.

Then carefully cut the tape along the tear line with a knife.

And lifting the edge of the linoleum, apply glue. It can be applied not only to the joint, but also a little in excess to the lower part. Then the seam will be glued to the surface on which the linoleum is laid, even if it is concrete.

If you bought a tube of cold welding to seal only one gap, you don’t have to skimp and apply a little more, but don’t overdo it. The glue should not get on the surface of the linoleum. And if this happens, then it needs to be removed with a dry cloth.

After applying the glue, the gap should be closed by ironing the surface of the tape with the same cloth. After 15 minutes, the tape can be removed.

You can walk on linoleum in an hour, but wet cleaning It is recommended to carry out no earlier than every other day.

Many homeowners, when finishing the floor, have a question about how to glue linoleum end-to-end to make the floor even and more durable.

Today there are many types of floor coverings, but linoleum does not give up its position. This material is one of the most practical and inexpensive. It allows you to create an even coating with a beautiful shine. But of this material there is an important drawback. It is very rarely possible to make a floor from a solid linoleum sheet, without joints and seams that can ruin appearance. The reason is simple: the size of the web depends on the standard roll width. This parameter must first be taken into account when choosing a material.

Meanwhile, the probability of choosing a roll of linoleum of the required width is low. Even the tightest and narrow room(with the possible exception of the corridor and small bathrooms) is usually much wider. In addition, the joining of the canvases is always carried out in difficult places in the apartment: in the area of ​​the doorway, in case of damage to the layer, as well as when joining linoleum with finishing coat another room, for example, tiles or wood.

But all this is not a reason to be upset, since it is possible to fix the matter yourself, without even resorting to the help of a specialist. It is enough to study the question of how to glue linoleum end-to-end at home, choose the most preferable method and strictly follow the instructions.

Existing gluing methods

Important! It is necessary to decide how to glue linoleum end-to-end already at the installation stage.

It is worth deciding which option is more suitable in specific situation. There are several methods for gluing linoleum and each of them, in addition to obvious advantages, also has significant disadvantages.

The main connection methods are as follows:

1. Double-sided tape. This method is good due to its low price. Doing the docking in this way will not be difficult, even if you do not have the relevant experience. At the same time, the work does not take much time. On the other hand, tape is extremely unreliable, and the joint of the linoleum sheets will still be visible and there is no way to disguise it.
2. Using a threshold. The method is more suitable for fastening layers of linoleum in the area of ​​a doorway when moving from a room to another. The threshold looks aesthetically pleasing, prevents the edges of the linoleum from bending, and is also inexpensive. Metal thresholds They are produced in different color options, so you can choose one that will be less noticeable and practically indistinguishable in color from the main coating.

In addition, the problem often arises of how to glue linoleum on a felt backing end-to-end. Threshold in in this case- the only one possible option. Otherwise, using glue will not bring the desired result: bottom layer will stick, but the top one will begin to delaminate.

The disadvantage of this method is that the threshold will create a small protrusion above the floor level, which can sometimes be dangerous or simply inconvenient. Moreover, among different color options you need to very accurately select a threshold that matches the color of the linoleum.

There are 2 types of welding used when joining linoleum sheets.

Hot welding allows you to tightly glue linoleum end-to-end. The seam turns out to be practically indistinguishable from the main coating. But this method is quite labor-intensive, and you will also need special tools. It will not be possible to cope with such work without special skills. Equipment for “hot welding” is expensive and also requires certain skills.

Cold welding is more suitable for home use. It is used not only for butt gluing, but also for repairing damaged coatings. It is easy to use, so there is no need to involve professionals in the work. One of the disadvantages: the glue used for work is toxic, so safety rules must be followed when working. It is necessary to work with gloves, and the room must be constantly ventilated.

Methods for butt gluing linoleum

Important! Before gluing linoleum end-to-end, you must first prepare the surface.

All debris and dust must be removed from the surface with a broom or vacuum cleaner. If the floor is not very level or has potholes or cracks, they can be filled with putty. If necessary, the floor is covered with a layer of primer.

The cut layers of linoleum are laid out on the floor so that the joints of both sheets coincide. You may need to trim the edges. This can be done using a utility knife or scissors.

The adhesive tape is applied to the floor without removing the protective tape. Carefully remove the paper strip from the adhesive layer, gluing the strips to the floor.

The whole procedure does not take much time, and also does not require special knowledge. But the connection will be fragile in any case, since the tape cannot withstand, for example, moisture. If water gets into the connection and flows under the linoleum, it will gradually begin to collapse. With prolonged use, it gradually loses strength. In addition, in this case the joint between the canvases cannot be masked. If the linoleum sheets are not glued, then when the furniture moves, the sheets will move.

In order for the connection to last as long as possible, the seam must be made good quality, since otherwise dirt will accumulate in the joint.

One of the difficult questions of apartment owners is how to butt-glue felt-based linoleum. This material consists of 2 layers. When gluing, the felt layer is well fixed to the surface, but the top coating gradually begins to deteriorate. One of the best ways gluing such linoleum is the installation of thresholds.

As in the previous case, the edges of the canvases are carefully aligned and, if necessary, trimmed with a knife or scissors. Then you need to select the thresholds. The main parameter is the length, it must match the length of the seam. If the threshold is a little longer, it can be adjusted using a metal saw or jigsaw.

The finished part is applied to the joint and secured with self-tapping screws.

Hot or cold welding?

For those who are thinking about how to glue linoleum end-to-end at home, hot or cold welding is recommended. Which method you ultimately choose is determined by several factors:

• type of linoleum;
• what should the seam be like in the end?
• ability to comply with installation requirements.

For example, “hot welding” allows you to make the seam almost invisible. But this gluing method is not suitable for all types of linoleum: when exposed to household linoleum, it will only melt and lose its attractive appearance. Therefore, in everyday life such linoleum is used extremely rarely, while for gluing coatings on industrial facilities Any of these methods will do.

Another important point is what the seam configuration should be. A simple seam can also be made by hot welding, but to create complex contours, appliqués or combining linoleum sheets of different colors and patterns, only cold is suitable.

Finally, to get best result gluing technology must be followed. Cold welding is easier, since it does not require special knowledge. For hot welding, you need to have tools (a welding hair dryer with different attachments, special knives and cords). All this equipment is quite expensive, and you need to know how to work with it. Therefore for living conditions This method of joining seams is simply unprofitable.

Hot welding technology

Using hot welding, you can get a durable and almost invisible seam. The gluing itself should be carried out only when both sheets of linoleum are glued. Hot welding technology is complex, so before starting it is better to watch a video on how to glue linoleum end-to-end.

The sheets of material must be laid so that the joint between them is minimal, and then a small groove is cut with a chisel for the construction cord. All debris and dust are removed from the groove.

The cord needs to be tucked into a special hair dryer, and then connect the hair dryer to the network. When exposed warm air the cord expands and fills the entire groove. The linoleum also softens and bonds firmly to the cord.

After processing, a small protrusion from the cord remains above the floor surface; it must be carefully cut off. For this you will need a special knife.

The procedure itself does not seem very complicated. But in reality, in order to perform all the work at the proper level, you must have certain skills. If you perform all the steps yourself, there is a chance that the result will not live up to expectations. Therefore, it is recommended that instead of hot welding, find another way to glue linoleum end-to-end.

Cold seam welding

For cold welding, special glue is used. It dries quickly and reliably glues the joints of the canvases. The glue is packaged in tubes with a long pointed tip, thanks to which it gets deep into the seam. Therefore, liquid glue gives very good strength, because gluing occurs almost at the molecular level.

Due to its structure and gluing quality, cold welding is suitable for all types of linoleum (household, semi-commercial, commercial) and different types grounds. Thus, liquid welding can even be used to glue a layer of material onto a foam base, while hot welding in this case is strictly prohibited. Cold welding is good not only for gluing linoleum sheets, but also for repairing coatings.

The undeniable advantage of cold welding is its ease of use. Just watch the video on how to glue linoleum end-to-end using cold welding and you can get to work - general principle will be clear.

The only point is the choice of glue. For cold welding, glue A and C are most often used. The latter is thicker, so it is usually used if it is necessary to repair damage to old linoleum. It almost tightly glues the edges of the linoleum and allows you to get a whole canvas. If the coating is “fresh,” then type A glue is more suitable. It is more liquid, so it acts somewhat differently. Glue A “melts” the sheets, gluing them together. The result is a dense and almost invisible seam.

Important! When working with glue, safety must be observed. The room should be well ventilated, and all work should be done wearing protective gloves. The coating must be cleaned of dust and debris.

The advantage of cold welding is its simplicity and reliability

Scotch tape is applied to the edges of the canvases that do not need to be “melted” - it will protect the linoleum from the effects of glue and will not cause liquid glue spread out. The tape needs to be cut above the joint and glue should be applied inside the seam. It is desirable that the glue protrudes slightly above the surface, no more than 5 mm. Then you need to leave the linoleum for 15 minutes and then remove the tape.

Working with glue C follows the same scheme, but you can watch the video on how to glue linoleum end-to-end using cold welding. The only difference is that there is no need to use tape. Since this glue is thicker, it will not spread beyond the seam.

Flooring PVC or natural roll coverings they look presentable and are characterized by good resistance to compression and abrasion loads. But if the installation and operating conditions are violated, it is easy to make a hole or a cut in the linoleum, burn it, or even “decorate” it with difficult-to-remove stains. Any defects can be dealt with at home with your own hands.

Features of linoleum coverings

For the home, buyers most often choose inexpensive household or semi-commercial series of 21-23 and 31 wear resistance classes. Although linoleum is an elastic flooring material, the surface of natural and PVC products is quite resistant to abrasive effects, and some collections can even withstand furniture rollers and sharp heels women's shoes and animal claws.

But, unfortunately, buyers do not always listen to manufacturers’ recommendations or do not have the financial means. Therefore, a coating that does not correspond to the load class of the room is chosen. For example, for a hallway or kitchen in a house with small children and pets, they buy economy series 21 classes. Or even worse - due to limited budgets in schools and kindergartens, material of category 21-22 from the household series is laid on the floor with the minimum possible protective layer. And you shouldn’t be surprised that the linoleum tore so quickly, bunched up like an accordion, or lost its luster. For such rather harsh conditions, completely different coatings are designed - from class 31 and above.

Accusing manufacturers of producing low-quality flooring products, buyers forget about one more thing important factor – correct installation. Factories Tarkett, DWL, Juteks, Grabo, Forbo and others strongly recommend that you carefully read the instructions before installing the coating. It states in black and white that:

If mistakes are made and the surface of the linoleum is damaged, then do not despair. With desire and some skill, almost any defect can be corrected.

DIY linoleum repair

One of the characteristics of rolled marmoleum and PVC coating is partial repairability. This means that, for example, a small cut or bulge can be easily repaired - just carefully seal the torn linoleum with special compounds. But the burnt area and other types of holes are more difficult to eliminate. We will tell you about everything in order below.

Difficult to remove stains, traces of rubber, glue, varnish

Tough stains.

Such contaminants are classified as complex, so special equipment is used to remove them. household chemicals. For example, Forbo and Wicanders have entire series of care, cleaning and protection products natural coatings(marmoleum, cork, parquet). And Dr. Schutz, InterCHIM and Tarkett produce professional cleaning and care chemicals for vinyl flooring materials. Including:

Advice! To clean PVC roll coverings, marmoleum and cork, it is not recommended to use products containing chlorine, abrasive powder cleaners, solvents and petroleum products.

Of course, the above list is far from complete. The assortment is huge, so choosing what you need won’t be difficult. But you shouldn’t listen to the advice of would-be experts and worsen the condition of the coating with sandpaper or abrasive powders. This will not restore a burned or contaminated area. On the contrary - wear-resistant top layer will be removed, and the area with the defect will be irretrievably damaged.

Minor defects associated with a violation of the integrity of the coating

Cuts, punctures, lacerations

What to do if you accidentally cut or torn linoleum? Everything is very simple - fix it by gluing using PVA or “cold welding”. The last one is a series of adhesive polymer compositions, which not only connect, but fuse parts of the fabric, forming a durable, almost invisible seam. Available in three variations:

To glue the parts as accurately as possible, the tube with the adhesive composition comes with special needle-shaped tips with a standard or C-, T-shaped nozzle.

“Cold welding” refers to slightly toxic and flammable building materials, so you need to work with it carefully, preferably using personal protection(glasses, gloves)

Before work, the linoleum elements to be glued must be cleaned of dirt, mastic residues, torn felt or pieces of foam base, and dust. If there are recesses in the base, they must be filled with quick-drying cement and vacuumed. Protect the cut or torn fabric from excess glue protruding onto the surface with a piece of masking tape, insert a needle into the joint or puncture, squeeze out a little adhesive mass and leave to dry. After a few hours (the exact period is indicated in the instructions), you can load the coating as usual.

Formation of waves on the surface

Wave-like swellings on the surface almost always appear due to incorrect, glue-free installation. Less often - because high humidity grounds (dampness, etc.). In the first case, you need to remove the furniture from the room, remove the baseboards, warm up construction hairdryer linoleum and smooth it thoroughly. It is advisable to load the surface for several days to fix the coating in the desired position.

But dampness and its consequences will have to be dealt with seriously. First you need to eliminate the source of high humidity, dry the base, and, if possible, waterproof it. Only after this can linoleum be laid using adhesive compounds.

Blistering, separation at seams

Locally swollen areas can be eliminated using PVA glue or “cold welding”: we pierce the bubble or make a cross-shaped incision, introduce the composition under the canvas and glue the linoleum to the base.

“Raised” edges of linoleum can be easily repaired using the same adhesives - welding or polyvinyl acetate. But you must strictly follow the instructions.

If the joints are in doorways or in the middle of the room they diverge by more than 4 mm, the edges are frayed, then it is better to use metal or PVC thresholds to connect them. The range of products is wide: with open or hidden fastenings, painted with a polymer powder composition or laminated to match the color and texture of linoleum. We believe that choosing the right one will not be difficult.

How to seal punched holes, blackened or peeling areas

In this case, local replacement of the damaged piece is carried out. To do this, select a piece of coating of the same color and design as possible. The defective area is removed, the remains of old glue or mastic are removed from the base, and, if necessary, leveling and cleaning from dust and dirt are carried out. Next, fresh adhesive is applied to the base floor with a brush, a patch is inserted, and carefully smoothed. You can place a weight on the surface for several days.

In conclusion, I would like to note that any repair of linoleum should be carried out immediately upon detection of defects. Otherwise, the damaged area will increase day by day, and the possibilities for repairing it will decrease.

Advice! If you need repairmen, there is a very convenient service for selecting them. Just submit in the form below detailed description work that needs to be done and offers will be sent to your email with prices ranging from construction crews and companies. You can see reviews about each of them and photographs with examples of work. It's FREE and there's no obligation.