Training for installer of frame-cladding structures. Profession installer of frame-sheathing structures Installer of frame-sheathing structures training
Unified Tariff and Qualification Directory of Works and Professions of Workers (UTKS), 2019
Issue No. 3 ETKS
The release was approved by Order of the Ministry of Health and Social Development of the Russian Federation dated 04/06/2007 N 243
(as amended: Orders of the Ministry of Health and Social Development of the Russian Federation dated November 28, 2008 N 679, dated April 30, 2009 N 233)
Installer of frame and sheathing structures
§ 147a. Installer of frame-sheathing structures, 3rd category
Characteristics of work. Installation of single-layer, double-layer partitions, single-level and two-level suspended ceilings from plasterboard and gypsum fiber sheets on metal and wooden frames. Installation internal partitions from cement slabs"Aquapanel" type on metal and wooden frames. Marking installation sites in the design position of frame-sheathing structures using hand tools. Installation of beacons. Cutting plasterboard, gypsum fiber sheet materials, guides and rack profiles of metal and wooden frames. Installation into the design position and fastening of guides and rack profiles of metal and wooden frames. Installation and fastening of plasterboard and gypsum fiber sheets on a metal frame. Laying sound and thermal insulation materials. Puttying uneven surfaces, gluing plasterboard and gypsum fiber sheets. Preparation of installation, adhesive, waterproofing mixtures and solutions from dry building mixtures on a cement and gypsum basis manually and mechanized way. Straining and mixing solutions. Transportation of used materials, devices, tools, inventory tables, stepladders, ladders within working area. Dismantling of simple structures during production repair work.
Must know: methods for installing single-layer, double-layer partitions, single-level and two-level suspended ceilings made of plasterboard and gypsum fiber sheets on metal and wooden frames; rules for installing internal partitions made of cement slabs of the "Aquapanel" type on metal and wooden frames; methods and techniques for marking installation sites for frame-sheathing structures; rules for cutting sheet materials, guides and rack profiles of metal and wooden frames; purpose and methods of preparing installation, adhesive, waterproofing mixtures and solutions from dry construction mixtures based on cement and gypsum; purpose and rules for using the tools, devices and equipment used; rules for transporting and storing materials, parts, fixtures and tools within the work area.
§ 147b. Installer of frame-sheathing structures, 4th category
(introduced by Order of the Ministry of Health and Social Development of the Russian Federation dated April 30, 2009 N 233)
Characteristics of work. Installation of three-layer, multi-layer partitions and multi-level suspended ceilings made of plasterboard and gypsum fiber sheets on metal and wooden frames. Installation of a prefabricated “dry” floor based on two-layer, multi-layer gypsum fiber sheets or cement boards of the “Aquapanel” type. Leveling the surface and leveling the dry backfill under the floors. Installation of external structures made of cement slabs of the "Aquapanel" type on metal and wooden frames. Installation of external facades type " warm wall". Installation of tongue-and-groove slabs. Marking installation sites for frame-sheathing structures using laser tools. Cladding of room surfaces with frame-sheathing structures made of plasterboard and gypsum-fiber sheets on metal and wooden frames. Cladding of inclined surfaces of rooms with plasterboard and gypsum-fiber sheets. Cladding of attic surfaces with plasterboard and gypsum fiber sheets. Installation of frame-cladding structures of complex geometric shapes in the design position. Installation and fastening of guides and rack profiles of metal and wooden frames of complex geometric shapes. window openings. Execution simple work for repair of sheathing, cladding, floor subfloors.
Must know: methods for installing three-layer and multi-layer partitions, multi-level suspended ceilings made of plasterboard and gypsum fiber sheets on metal and wooden frames, external structures made of cement slabs of the "Aquapanel" type on metal and wooden frames; the procedure for installing a prefabricated “dry” floor based on two-layer, multi-layer and gypsum fiber sheets or cement boards of the “Aquapanel” type; methods of covering inclined surfaces of premises with plasterboard and gypsum fiber sheets; rules for marking installation sites for frame-sheathing structures using laser tools; rules for installing metal and wooden frames of complex geometric shapes in the design position; rules for reading working drawings; methods for performing simple repair work on sheathing, cladding, and subfloors.
§ 147c. Installer of frame-sheathing structures, 5th category
(introduced by Order of the Ministry of Health and Social Development of the Russian Federation dated April 30, 2009 N 233)
Installation of suspended ceilings made of acoustic plasterboard sheets. Attaching frame profiles to the base ceiling using special hangers. Construction of niches, false columns, internal domes and vaults from plasterboard and gypsum fiber sheets. Installation of ventilated building facades using cement slabs of the "Aquapanel" type. Sealing corner joints, seams between facing slabs and joints with putty. Sanding seams after puttying. Installation of protective corner profiles. Cutting and manufacturing elements of frame-sheathing structures of complex geometric shapes. Cutting and manufacturing of frame elements complex design. Making templates individual elements frame-sheathing structures of complex geometric shapes. Selection and assembly of materials and parts in accordance with the work project.
Must know: installation procedure for suspended ceilings made of acoustic plasterboard sheets; methods of attaching frame profiles to the base ceiling; methods for constructing niches, false columns, internal domes and vaults from plasterboard and gypsum fiber sheets; procedure for sealing corner joints; purpose and methods of manufacturing templates for frame-sheathing structures of complex geometric shapes; rules for cutting and manufacturing frame elements of frame-sheathing structures of complex geometric shapes and complex structures; rules for selecting and assembling materials and parts in accordance with the work project.
§ 147g. Installer of frame-sheathing structures, 6th category
(introduced by Order of the Ministry of Health and Social Development of the Russian Federation dated April 30, 2009 N 233)
Characteristics of work. Installation of raster and slatted suspended ceilings with installation of sound and heat insulating materials. Installation of ceilings of curved and broken shapes. Selection decorative materials and cladding of frame-cladding structures using decorative elements. Cutting and manufacturing of individual elements of non-standard frames of frame-sheathing structures of complex geometric shapes. Facing complex, non-standard joints of various frame-sheathing structures in accordance with working drawings. Installation of additional frame elements for hanging and technological equipment. Production of templates for curved and broken forms of cladding of frame-sheathing structures. Calculation required quantity materials for the corresponding frame-sheathing structures. Carrying out operational control of the quality and volume of work performed. Maintaining incoming, outgoing and executive documentation.
Must know: installation procedure for raster and slatted suspended ceilings; methods for installing ceilings of curved and broken shapes; procedure for selecting decorative materials; methods for performing decorative cladding of frames of frame-sheathing structures; fundamentals of design and technology for cutting and manufacturing individual elements of non-standard frames of frame-sheathing structures of complex geometric shapes; purpose and methods of manufacturing templates for curved and broken forms of cladding of frame-sheathing structures; rules for conducting operational control of the quality and volume of work performed; rules for maintaining receipts, expenses and executive documentation.
I APPROVED
President
ONNO "National Association of Self-Regulatory Organizations"
A. S. Pushkin
JOB DESCRIPTION
installer of basic frame-sheathing structures, 3rd category
Divisions " Gypsum technologies»
1. General provisions
1.1. Real job description determines the functional, job responsibilities, rights and responsibilities of the installer of basic frame-sheathing structures of the 3rd category of the “Gypsum Technologies” division (hereinafter referred to as the Installer of basic frame-sheathing structures of the 3rd category) ONNO “National Association of Self-Regulatory Organizations (hereinafter referred to as the Institution).
1.2. A person who satisfies following requirements to education and training:
Special conditions permission to work as an installer of basic frame-sheathing structures of the 3rd category:
1.3. An installer of basic frame-sheathing structures of the 3rd category must know:
1.4. An installer of basic frame-sheathing structures of the 3rd category must be able to:
1.5. An installer of basic frame-sheathing structures of the 3rd category is appointed to the position and dismissed from the position by order of the President of the Institution in accordance with the current legislation of the Russian Federation.
1.6. The installer of basic frame-sheathing structures of the 3rd category reports to the President of the Institution and the head of the Gypsum Technologies division.
2. Labor functions
3. Job responsibilities
4. Rights
An installer of basic frame-sheathing structures of the 3rd category has the right to:
4.1. Request and receive the necessary information, as well as materials and documents related to the activities of an installer of basic frame-sheathing structures of the 3rd category.
4.2. Improve your qualifications, undergo retraining (retraining).
4.3. Enter into relationships with departments of third-party institutions and organizations to resolve issues within the competence of an installer of basic frame-sheathing structures of the 3rd category.
4.4. Take part in the discussion of issues included in his functional responsibilities.
4.5. Make suggestions and comments on how to improve activities in the assigned area of work.
4.6. Contact the relevant local government bodies or the court to resolve disputes arising during the performance of functional duties.
4.7. Use information materials and regulatory documents necessary to perform your job duties.
4.8. Pass certification in the prescribed manner.
5. Responsibility
The installer of basic frame-sheathing structures of the 3rd category is responsible for:
5.1. Failure to perform (improper performance) of one’s functional duties.
5.2. Failure to comply with orders and instructions of the President of the Institution.
5.3. Inaccurate information about the status of fulfillment of assigned tasks and instructions, violation of deadlines for their execution.
5.4. Violation of internal labor regulations, fire safety and safety rules established in the Institution.
5.5. Causing material damage within the limits established by the current legislation of the Russian Federation.
5.6. Disclosure of information that has become known in connection with the performance of official duties.
For the above violations, an installer of basic frame-sheathing structures of the 3rd category may be subject to disciplinary, material, administrative, civil and criminal liability in accordance with current legislation, depending on the severity of the offense.
This job description has been developed in accordance with the provisions (requirements) Labor Code Russian Federation dated December 30, 2001 No. 197 Federal Law (Labor Code of the Russian Federation) (with amendments and additions), the professional standard “Installer of frame-sheathing structures” approved by order of the Ministry of Labor and Social Protection of the Russian Federation dated March 10, 2015 No. 150n and others normative legal acts regulating labor relations.
An installer of frame-sheathing structures installs partitions and suspended ceilings made of plasterboard and gypsum fiber sheets on metal and wooden frames.
Depending on the category according to ETKS, the functions of an installer of frame-sheathing structures include:
- 3rd category: Installation of single-layer, double-layer partitions, single-level and two-level suspended ceilings made of plasterboard and gypsum fiber sheets on metal and wooden frames. Installation of internal partitions from cement slabs of the "Aquapanel" type on metal and wooden frames. Marking installation sites in the design position of frame-sheathing structures using hand tools. Installation of beacons. Cutting plasterboard, gypsum fiber sheet materials, guides and rack profiles for metal and wooden frames. Installation into the design position and fastening of guides and rack profiles of metal and wooden frames. Installation and fastening to metal frame plasterboard and gypsum fiber sheets. Laying sound and heat insulation materials. Puttying uneven surfaces, gluing plasterboard and gypsum fiber sheets. Preparation of installation, adhesive, waterproofing mixtures and solutions from dry construction mixtures on a cement and gypsum basis, manually and mechanized. Straining and mixing solutions. Transportation of used materials, devices, tools, inventory tables, stepladders, ladders within the working area. Dismantling of simple structures during repair work.
- 4th category: Installation of three-layer, multi-layer partitions and multi-level suspended ceilings made of plasterboard and gypsum fiber sheets on metal and wooden frames. Installation of a prefabricated “dry” floor based on two-layer, multi-layer gypsum fiber sheets or cement boards of the “Aquapanel” type. Leveling the surface and leveling the dry backfill under the floors. Installation of external structures made of cement slabs of the "Aquapanel" type on metal and wooden frames. Installation of external facades of the "warm wall" type. Installation of tongue-and-groove slabs. Marking installation sites for frame-sheathing structures using laser tools. Covering the surfaces of premises with frame-cladding structures made of plasterboard and gypsum-fiber sheets on metal and wooden frames. Covering inclined surfaces of premises with plasterboard and gypsum fiber sheets. Surface cladding attic premises plasterboard and gypsum fiber sheets. Installation of frame-sheathing structures of complex geometric shapes in the design position. Installation and fastening of guides and rack profiles of metal and wooden frames of complex geometric shapes. Framing door and window openings. Performing simple repair work on sheathing, cladding, and subfloors.
- 5th category: Installation of suspended ceilings from acoustic plasterboard sheets. Attaching frame profiles to the base ceiling using special hangers. Construction of niches, false columns, internal domes and vaults from plasterboard and gypsum fiber sheets. Installation of ventilated building facades using cement slabs of the "Aquapanel" type. Seal corner joints, seams between facing slabs and joints with putty. Sanding seams after puttying. Installation of protective corner profiles. Cutting and manufacturing elements of frame-sheathing structures of complex geometric shapes. Cutting and manufacturing of frame elements of complex design. Production of templates for individual elements of frame-sheathing structures of complex geometric shapes. Selection and assembly of materials and parts in accordance with the work project.
- 6th category: Installation of raster and slatted suspended ceilings with installation of sound and heat insulation materials. Installation of ceilings of curved and broken shapes. Selection of decorative materials and cladding of frame-sheathing structures using decorative elements. Cutting and manufacturing of individual elements of non-standard frames of frame-sheathing structures of complex geometric shapes. Facing complex, non-standard joints of various frame-sheathing structures in accordance with working drawings. Installation of additional frame elements for attachments and technological equipment. Production of templates for curved and broken forms of cladding of frame-sheathing structures. Calculation of the required amount of materials for the corresponding frame-sheathing structures. Carrying out operational control of the quality and volume of work performed. Maintaining incoming, outgoing and executive documentation.
Training for an installer of frame-cladding structures in accordance with the Order of the Ministry of Labor on Social Protection of the Russian Federation dated March 10, 2015 N 150n “On approval of the professional standard “Installer of frame-cladding structures”, “List of professions of workers, positions of employees for which vocational training is carried out”, approved by Order of the Ministry of Education and Science No. 513 of July 2, 2013 “On approval of the List of worker professions, employee positions for which vocational training is carried out”, the requirements of the Unified Tariff and Qualification Directory of Work and Worker Professions, All-Russian classifier worker professions, employee positions and wage grades.
Modern construction requires tight deadlines and energy-efficient solutions. Therefore, frame buildings and structures being erected today are increasingly competing with similar buildings made of brick and wood. The use of frame-sheathing structures has also found its way into interior decoration premises - these are all kinds of ceilings based on plasterboard using various metal profiles and wooden frames.
The basis of the profession of an installer of frame-cladding structures is the installation of enclosing structures, repair, reconstruction and finishing of internal and external surfaces of buildings and structures using complete systems dry construction.
The profession of an installer of frame-cladding structures requires the following knowledge and skills: to be able to install single-layer, double-layer partitions, single-level and two-level suspended ceilings made of plasterboard and gypsum fiber sheets on metal and wooden frames; installation of internal partitions made of cement slabs on metal and wooden frames; marking installation sites in the design position of frame-sheathing structures using hand tools; installation of beacons; cutting plasterboard, gypsum fiber sheet materials, guides and rack profiles of metal and wooden frames; installation in the design position and fastening of guides and rack profiles of metal and wooden frames; installation and fastening of plasterboard and gypsum fiber sheets on a metal frame. Laying sound and heat insulating materials; puttying uneven surfaces, gluing plasterboard and gypsum fiber sheets; prepare installation, adhesive, waterproofing mixtures and solutions from dry construction mixtures on a cement and gypsum basis manually and mechanizedly; filtering and mixing solutions; transportation of used materials, devices, tools, inventory tables, stepladders, ladders within the work area; dismantling of simple structures during repair work, etc.
To carry out the work, the installer of frame-cladding structures must undergo professional training, no more than once a year and no less than once every 5 years, take short-term advanced training courses of at least 72 hours in order to acquire new knowledge and skills and increase their level, have a medical record with no contraindications to work. It is important that persons under 18 years of age are not allowed to work as an installer of frame-cladding structures.
Cost of training and terms of study
ANO DPO "Comprehensive Training Center for Personnel Retraining" provides vocational training in the following programs:
Form of study: full-time, part-time, distance learning using Internet technologies.
In the process of mastering the training program, developed taking into account the Order of the Ministry of Labor on Social Protection of the Russian Federation dated March 10, 2015 N 150n “On approval of the professional standard “Installer of frame-cladding structures”, Order of the Ministry of Labor of Russia No. 513 dated July 2, 2013 “On approval of the List of occupations of workers, positions of employees , on which professional training is carried out" for mastering working profession installer of frame-cladding structures The following questions are studied:
- Economics of the industry and enterprise
- Materials Science
- Electrical engineering
- Construction drawing
- Basics of construction production
- Occupational Health and Safety
- Installation technology of frame-sheathing structures
Classes are held in the classroom of the ANO DPO “Comprehensive Training Center for Personnel Retraining,” as well as through the Internet portal of the Training Center website.
Upon completion of training, you will be issued
- Certificate for each employee who has passed the certification;
- Protocol certification commission with a list of employees who have passed certification.
How to get trained as an installer of frame-cladding structures
After completing vocational training (or at a specialized school or training center), an installer of frame-cladding structures must annually take short-term training courses of at least 72 hours, no more than once a year and no less than once every 5 years.
Advantages of working with ANO DPO “Comprehensive Training Center for Personnel Retraining”
- all training programs are developed by teachers taking into account modern educational and teaching materials using new technologies in teaching;
- A convenient form of electronic library has been developed for you. educational material course;
- the cost of training to become an installer of frame-cladding structures is significantly lower than that of other training centers;
- Training takes place at a time convenient for you and in the form required for your organization.