To stand out from total mass apartment design, many decide to create a unique interior. Wooden lamps often help achieve the goal. They stand out brightly against the background modern options, attract the attention of guests and are inexpensive. Moreover, such chandeliers, sconces or table lamps can be made with your own hands. Let's consider the advantages of wooden lamps, what types of designs are available and what you can do yourself.

In this article:

Advantages and disadvantages of wood

Wood has been used in interior design since the advent of man; it has not lost its relevance even now. Among the main advantages, we note two points:

• Environmental friendliness. Unlike plastic lampshades, wood does not emit dangerous fumes, even if it is heated. Moreover, coniferous materials can fill the room with a pleasant aroma. In some cases, this property helps fight colds.
• Ease of processing. It is difficult to find a more pliable material for self-made than wood. A person has a wide scope for imagination, which can be realized with a few basic tools. And the finished product will be able to surprise everyone who sees it; it will compare favorably with the factory versions.

Still, there are good reasons why manufacturers rarely produce wooden lamps. The disadvantages include:

• Flammability. No matter how the surface is impregnated, wood can still catch fire, especially if you use incandescent lamps.
• Pests. Corrosion is terrible for metal, and various insects are terrible for wood. The finished chandelier can be undermined by bugs, fungus and other unpleasant organisms.
• Hygroscopicity. It is not recommended to install a wooden lamp in the bathroom. This material swells, deforms and breaks down over time due to the fact that it absorbs moisture. To some extent, special impregnations will help protect against water.

The most resistant type of wood for lamps is needles. It is less susceptible to insect attacks and copes better with humid air.

We select the style of the lamp in accordance with the interior

Homemade wooden chandeliers fit well not only into the spacious royal halls, but also into an ordinary apartment. Currently, there are several interior styles that go well with such lamps:

• Country. The main idea is to create a simple, rustic feel. Lamps made from pine needles are perfect.
• Provence. Here you need to work hard, because such chandeliers are made from high-quality processed wood so that its texture is clearly visible. The look is not complete without sophisticated lampshades.
• Oriental. To create such a decorative lamp, use unusual materials, for example - bamboo or vine.
• Chalet. These are rude simple lamps, the basis for which are old wooden things - dry barrels, baskets or troughs.
• Rustic. This style is not much different from the previous one. The only thing that can be noted is the more sloppy shapes. Lamps are made from untreated wood.
• Modern. Square, simple chandeliers made from thin slats can complement the interior of a living room or dining room.

Options for making your own lamp

Wood provides almost unlimited possibilities for making unique lamps. You can use all available materials, even waste that you find in the forest. To work you will need simple tools:

• hammer;
• screwdriver/drill;
• nails and screws;
• glue;
• materials for impregnation;
• dye.
• Ready wooden products

One of the most popular base options for lamps made by hand from wood are ready-made products, for example, a cart wheel. In the past, such chandeliers were hung in taverns, and the material could be found at almost every turn. Now such a product is available for purchase only in a specialized store.

To make an original wooden chandelier, take a base wheel, a certain number of lamps, depending on the size of the product, chains for fastening and materials to hide the power wire. Small touches will help create an additional feeling of immersion in antiquity - you can trim the wood with forged parts. This lamp is suitable for wooden house and will fit perfectly into the overall interior.

If you can't find a cart wheel, you definitely have regular wooden clothespins. You can use them to make a chandelier, sconce or table lamp. Some models will require glue, others just time and enthusiasm. As an example, you can use a metal mesh for the base, roll it into a cylinder of sufficient size to fit the lamp inside. Attach clothespins from the outside, without glue or nails, simply putting them on the base. You can involve a child in the work, and warm light The finished lamp will be a pleasant reminder of the time spent together.

You can make a lamp from wood using ordinary hangers. Simply stack them on top of each other so that there is room for a lamp in the center. To make the design look more attractive, rotate each subsequent hanger a little around its axis. For fastening you only need glue. Do not doubt that such a lamp self made will not leave you indifferent.

In a similar way, you can independently come up with ideas on how to make a lamp from wood. Anything can be used: old barrels, a ship's wheel, popsicle sticks and much more.

Natural materials from the forest

If for previous options you had to buy the basics, then in this section we will look at wooden blanks that can be found in the forest. As an example, use birch bark instead of a lampshade for a lamp. It will dim the light and make the room more romantic and calm. The only thing you need to remember is that this material is highly flammable and is best used led lamps.

If your imagination runs out, and a lamp for the garden or local area still needed, take a stump and drill a hole in it. Place a kerosene lamp in the finished niche or run a wire for LED lamps. Can be fixed at the top solar panels and then there will be light in the yard, even when it is turned off in the house. This lantern is weatherproof and looks interesting under the snow.

For some, driftwood is garbage, but for us it is the basis for a lamp. Of course, the wood must be sanded and varnished or painted in advance. At the top of the structure, attach one or more spotlights with a thin base. To get subdued light, you can use the lampshade described above or make it from paper or fabric. Even if you decide to make another similar lamp, the finished products will definitely have different unusual shapes.

Conclusion

By collecting a bundle of thin twigs, you can make an elegant lamp at home. Glue the sticks to the round ring, pointing them vertically downwards, alternate different lengths so that the finished chandelier looks even more unusual. Install a light bulb in the center and such a lamp can be hung in the kitchen or dining room. If you cut an arc (for example, from an old bucket), then you can glue twigs to the outer surface. This homemade product will serve as a wall lamp in the hallway.

There are no limits to your imagination. You can come up with your own unique decorative design for a lamp and assemble it with your own hands. Finished design will serve you for many years, making your evenings more comfortable and warmer.

1. Usability assessment
2. Preparation of material
3. What lamps to use

Original wooden interior items bring comfort and coziness to the environment. If you won’t surprise anyone with solid wood furniture or carved figures on the shelves, then a floor lamp, chandelier or sconce made of branches or driftwood will definitely attract the attention of guests.

However, wooden products are not cheap, especially original ones. We offer to save money and create lighting fixture with your own hands. In addition, this is a great way to implement bold ideas, spending very little time. To make lamps and sconces you will need standard carpentry tools.

Usability assessment

To understand how good a wooden lamp is, let’s weigh the pros and cons of it. unusual item decor.

Advantages:

• The environmental friendliness of wood is an important advantage over polymers and other synthetic materials.
• When heated and in its normal state, the tree emits aromatic substances from resin - ether, which relaxes and heals.
• From wood materials any shapes can be created - the raw materials can be easily processed with carpentry tools.
• An unusual option for interior decoration. Wooden chandeliers in residential buildings and offices are rare.

Flaws:

The disadvantages are reduced by using different impregnations and appropriate preparation of the timber. Therefore, a wooden lamp can be called a useful accessory that will emphasize the style of the room and give it charm.

Preparation of material

Lamps and sconces are made from any wood materials. Boards, branches, driftwood, plywood are used - the choice is determined by the idea. Nevertheless, no matter what the design for the lamp is made from, it is important to properly prepare the lumber:

• The wood must be dried.
• The workpieces should be treated with complex impregnations with fire-resistant, insecticidal and antiseptic components.
• It is worth choosing solid lumber without signs of rotting.

In addition to wood, light bulb sockets, carpentry tools and glue (preferably epoxy) are prepared to make lampshades.

What lamps to use

Since wood is a highly flammable material, you need to be careful when choosing a light source. It is better not to use an incandescent lamp for bedside lamps and lampshades - when burned, it strongly heats both the socket and the wood.

LED lamps and strips are suitable for such homemade products - they emit white light and do not heat up surfaces, and are fireproof. LED strips are ideally combined with wood of any color and texture.

Master class: lamps made from boards

There are countless ideas for making home lamps. We'll tell you how to do it homemade chandelier– it can be taken as a basis for creativity.

For manufacturing, you will need beams of any cross-section, for example 100×100 mm or less, depending on the desired dimensions finished product, as well as a mirror. We recommend making a drawing of the chandelier in advance, which will reflect the lengths of the sides and the area of ​​the mirror part (it should protrude beyond the internal perimeter in order to rest on the beams).

1. We make a blank from 4 bars of equal length.
2. Next, we form a “lock” - cut out a rectangular cup half the thickness. A cup cutter or jigsaw will help with this.
3. We assemble the structure and glue the parts together.
4. After this we carry out painting.
5. We pull the wiring with the socket from the top edge and fix it to the inside with brackets or small nails.
6. We attach a mirror on top. It will act as a light reflector. We fix it at the corners.
7. All that remains is to attach a pendant, for example, a chain.

The accessory is ready.

The video shows a version of the manufacture of such a lighting item, the operating principle is the same:

More ideas for lamps made from boards:

Lamps built into false beams. To make them, we connect 3 boards in a U-shape; wires and cartridges will be hidden in the resulting niche.

The wheel will create an antique effect or hunting lodge, forest bungalow. We attach the electrics to the top side of the wheel facing the ceiling.

One more thing interesting solution from the boards, watch the video

Master class: lampshades and lamps made of plywood

Plywood – light material, easy to process. You can create a variety of products from it. For example, an unusual night light for a children's room or hall. It will look equally good on the terrace country house and in a city apartment.

Or this:

For a house-shaped plywood night lamp, take a universal pattern on which you can make any pattern!

Now let's start making:

1. We transfer the templates prepared for all 4 sides onto a sheet of plywood of any thickness.
2. Sent for cutting electric jigsaw(or laser machine for the finest detailing of petals and small fragments). You can use manual, but with complex pattern you'll have to tinker.
3. Sand the cut edges with sandpaper.
4. Roofing work is done in the same way. We cut it to size, make a pattern and polish it.
5. Glue the pieces together. To ensure that the thin sheets stick to each other securely, we install bars inside the house in the corners to which we glue the walls.
6. We start the cartridge and fix it on the desired side interior space. The wire can be inserted into the pattern or a separate hole can be made for it.
7. We fix the roof and make the bottom. We also glue all the parts onto the corner bars.
8. We make a suspension or fastening in a convenient way.

The house is ready. A homemade night light or chandelier can be simple with a simple ornament or designer with a complex idea, wall or tabletop. We present a video master class on making a house from several sections.

A plywood lamp can have any appearance. The main thing in working with this material is the need to cut holes for the passage of light. More photos of night lights and lampshades:

To assemble such a lampshade from plywood, you need to cut out a groove lock on each piece. Then the parts can be connected without glue.

A wooden chandelier diffuses light throughout the room. The parts are connected using decorative screws.

Master class: lamps and chandeliers made from branches

Branches are the most accessible material for creativity. You can collect them at any time in a park or in a square near your home and immediately start creating. The difference between branches and other wooden pieces is that they do not need to be dried. As long as there is moisture in them, they can be bent and created different shapes. Over time, they will dry out and no longer straighten out.

Before harvesting the branches, you need to decide on the design of the lampshade or chandelier. Will it be weaving or tying thick sticks with rope, will wood be combined with other products - forging, metal frames etc. Here are some interesting ideas:

A master class will help you make such an interior accessory:

Generalized instructions for creating a lampshade from branches:

It’s easy to make a lampshade from branches; you don’t need any special skills or tools.

Master class: log lamp

An ordinary log or even a snag can act as a blank for a chandelier. The main thing is that the material is dried and neutralized from insects and microflora.

1. We give the workpiece the required size.
2. At the points where the cartridges are inserted, we make holes of the same diameter as the hidden part of the electrical device.
3. We attach the hangers.
4. We insert the electrics.

You can watch the master class in the video:

An unusually shaped piece of driftwood or a stick can be turned into a masterpiece by adding a simple lampshade to it:

Bottle chandeliers

Combined lamps look non-standard, for example, wooden base And glass bottles as lampshades.

Glass diffuses light and creates shades different colors. It’s easy to make such a lampshade:

1. IN wooden shield we form holes for bottles. The neck should fit tightly, so we select the diameter as accurately as possible.
2. We attach a hanger to the top of the boards. The chains by which the structure can be suspended from the ceiling look original.
3. We prepare the bottles. In order for them to give off light, the bottom must be removed. This can be done by heating the glass with boiling water, then quickly transferring the bottle under running cold water.
4. We insert the bottles into the holes in the board, and pull the electric wire through the neck.

The video shows the process of creating an interesting table lamp.

Handmade wooden lamps perfectly complement the interior, making the atmosphere of your home warmer and more comfortable. Original wooden lamps have been in quite high demand lately, becoming a familiar element not only of home furnishings - they can often be found in cafes, restaurants, museums, and other public places.

Such a thing can fit perfectly into the interior and elevate it if you choose materials that best suit the setting.

Features of the material

Natural wood, in addition to its aesthetic properties, has a number of significant advantages. Products made from it are easy to use and environmentally friendly. When heated, wood does not emit toxic substances, but on the contrary – has beneficial effect for people with chronic diseases respiratory tract, having medicinal properties. This effect is especially typical for coniferous species.

Wood is a material sufficiently pliable that in the skillful hands of a master it can acquire exactly the forms that he intended. Therefore, any creative design ideas are brought to life. Luxurious photos exclusive wooden lamps easily convince of this.

The material is quite versatile, due to which it can be used widely, in almost any type of interior. Interesting configurations and a variety of shapes allow the item to organically fit into any style.

Wooden lamps in the interior look solid and noble, moreover, they perfectly coexist with objects from the most various materials: plastic, glass, metal.

Along with the listed advantages, wood also has disadvantages. It is highly flammable, for this reason the products should not be placed in rooms with fireplaces, gas stoves and other sources of possible ignition.

The material is very sensitive to temperature changes and high humidity, therefore, placing wooden lamps in the bathroom or kitchen is highly undesirable. In addition, wood attracts small pests– termites and other insects. It is advisable to cover the products with special protective compounds, which will prevent their appearance and protect the material from deformation.

When using an electrical appliance, observe a number of simple precautions:

• place the light source at a sufficiently large distance from open fire(fireplace, stove);
• remember that the optimal location for the device is considered to be a room with a normal level of humidity and room temperature;
• wooden lamps do not allow the installation of ordinary incandescent lamps in them: their heating temperature is too high, it is unsafe; use LED, halogen, fluorescent lamps.

Application in various interiors

The versatility of wooden lamps allows them to be used when decorating the most various rooms, regardless of style. They are most appropriate in the setting country house, decorated in country style, Provence, oriental styles. The combination of natural simplicity with sophistication is the most valuable quality of wood.

Original “antique” lamps made of wood are widely in demand in retro styles. They are often made in the shape of cart wheels, with candle-shaped lamps located around the circumference. This design is usually used in restaurants, bars, and hotels.

Ceiling models look great in large rooms and living rooms, bringing luxury and elegance to the interior. Spot lighting options are relevant for small rooms, especially if they have low ceilings.

Lamps suitable for country style simple shapes, without any frills. They may look a little rough, but they will create a feeling of unity with nature and fit organically into the space without conflicting with other objects.

Oriental style requires the use of solid wood, welcomes clear shapes and lines, complemented by oriental motifs.

Characteristic of retro classic options or more original models, stylized as antiques.

Classic makes it possible to use stained glass; a lampshade for a lamp can be made from it; wooden structures have smooth, streamlined shapes.

High-tech allows you to create original designs, combining wood with metal, frosted glass and other materials.

How to make a lamp from wood with your own hands

Of course, by ordering a product in special workshops, you will receive a perfectly made, polished product. However, if you have experience working with wood, you can try to create an exclusive item yourself from the material that is available to you.

DIY wooden lamps are made from:

• branches;
• boards;
• bark;
• cuts;
• logs;
• veneer

If you have an idea that you can’t wait to implement, you can safely get started. First, the wood must be prepared by treating it with protective solutions and impregnations, and wait until it dries completely.

This stage is mandatory: an untreated product will not last long. The structure is then assembled and fastened together. We invite you to try several original options.

Driftwood lamp

This creative idea will not require much effort or expense to implement - use driftwood found in the forest under your feet. They are exclusive in themselves: every bend of the branch is unique. All you need to do is find a suitable specimen, clean it of bark and excess wood, then dry it thoroughly. For drying, a ventilated place away from direct sunlight is suitable.

After complete drying, you need to sand the driftwood well using sandpaper. Determine the side that will be attached to the ceiling. Using a blade, make grooves on it into which you will lay the wires. After finishing work with the wires, the holes must be carefully filled with putty, and then treated with stain and putty to match the color of the wood.

Cartridges are attached to the ends of the driftwood, you can come up with various ways their fastenings. When finished, treat the wood with varnish. It is necessary to lay several layers and dry each one. Choose acrylic or waterproof varnish.

You can also construct a table lamp or sconce in a similar way - driftwood will serve as an excellent base. This idea is easy to implement even if you do not have carpentry skills.

Chandelier made of branches

Gather carefully selected small branches together so that some of them are perpendicular to the ceiling. Next, you need to attach the lampshades to the ends of the branches, and carefully wrap the wires around them. Instead of branches, you can use real rhizomes if you are lucky enough to find one in the forest.

Find and implement your own ideas - wood gives you a lot of opportunities to experiment using your imagination. You will be rewarded for your creative impulses by receiving a designer product that will become an interior decoration.

Photos of wooden lamps

Photo
In the design of private houses, wood is most often associated with antiquity. Therefore, lamps made of wood have an ancient appearance. The most popular designs are chandeliers in the shape of a cart wheel.

Desktop device diagram wooden lamp.

How to make a lamp with your own hands from wood?

Advantages and disadvantages of wooden structures

A design of this type has the following advantages:

• if you place candles evenly, the design will give equal illumination to all elements of the room;
• the knitting needles will practically not create any obstacles to the light.

The same advantages have modern stylizations, however, today, instead of candles made of wax and splinters, lamps are used. In most cases, such designs are made in the form of a candle.

Wood structures have the following advantages:

Diagram of a round wooden lamp: 1 - segments for the rim, 2 - turned spoke, 3 - hub.

1. The material is environmentally friendly. Not only will it not emit harmful substances, but it will also saturate the air with aromatic resins, which make people’s breathing easier.
2. Wood can be easily processed. If for the production of plastic or metal structure will be needed special tools, then you can make your own wooden lamps using a minimal set of accessories.

Disadvantages of wooden structures:

1. Wood is a flammable material. Place elements from of this material Not recommended near incandescent lamps. If the contact in the lamp socket burns out, the structure may catch fire.
2. Wooden ceiling lights are susceptible to attacks by beetles, fungus and other pests. Suffer least from rot and pests conifers trees. For hardwood, it is recommended to use antiseptic agents that can reduce the flammability of the material.
3. Wood is a hygroscopic material. It absorbs moisture from the air, as a result of which, during the drying process, the material can change volume, shape or crack. In order for the structure to serve for a long time, it will need to be provided with constant temperature and humidity.

Nuances to consider when making wooden structures

In the process of constructing wooden lamps, the following nuances must be taken into account:

Scheme for assembling a lamp from wooden rings.

1. The structures must be of such a shape that all heating elements are removed from fixtures made of wood. The lamps must face upwards, since only in this case is the upward air flow will not cause wood deformation.
2. Rules fire safety It is prohibited to place wooden chandeliers under flammable elements.
3. A wood lamp is great for a bedroom or living room. In a kitchen or bathroom where there is sufficient large number pair, such structures are not allowed.

In the event of a phase short circuit, you can easily get an electric shock.

Making a lamp in the shape of a coffee service

To make a lamp with your own hands, you will need to prepare the following elements:

LED wooden lamp diagram.

1. Dry board made of any type of wood. You can use either ordinary pine or birch, or ash. Oak, which does not need to be painted or varnished, is also suitable.
2. Several translucent coffee cups and saucers to go with them.
3. Several cartridges for a small base with fasteners for them.
4. Required number of light bulbs. IN in this case It is recommended to use LED elements.
5. A small number of rubber gaskets. Their number will depend on the method of securing the cartridges.
6. Two-core copper wire of small cross-section and short length. It is best to use a wire with a cross-section of 0.75 mm.
7. A thin chain or twisted cord. These elements will be used to secure the product to the ceiling structure.
8. Required number of screws with rings. The lamp will be suspended using these elements.
9. Electric drill.
10. Drill bits for working with wood and tiles.
11. Pliers.
12. Screwdriver or screwdriver.

The manufacturing process of the structure is as follows:

1. The planed board is processed with sandpaper (first coarse, then fine).
2. Next, you will need to drill several holes in the places where you plan to place the cartridges.
3. If noble types of wood are used, then further processing of the material will not be necessary. If other types of wood are used, the material must be coated with stain, then dried and varnished in several layers. On outdoors The nitro varnish will dry for several hours, so this process will not take much time.

1. At the next stage, you will need to drill holes in the coffee cups and saucers, but it is very important not to damage them. In this case, you only need to use a drill for working with glass and tiles. Great efforts are not allowed. You need to drill at a low speed, and during the process you need to make sure that there are no distortions. If you press too hard on the electric drill, the bowl or saucer may break.
2. Wires must be attached to all existing sockets. At this stage, they should not be fastened to each other.
3. The entire structure is screwed together into a single unit. If the cartridges will use platforms with holes for fasteners, then they need to be pulled to the board through the holes in the saucers or cups. If there is a threaded pipe and a nut at the end of the cartridge, then they must be passed through the cups, saucers and board. Between metal and glass elements it is necessary to install rubber gaskets. You can make such a device yourself from an unused inner tube from a bicycle or car.
4. You will need to screw screws with rings into the back of the board.
5. The cartridges are connected in parallel. There is no need to leave twists that are wrapped with electrical tape. Care must be taken to make even that part of the lamp that no one can see. To fasten the wires you will need to use a block.
6. The block must be fixed to the back of the board using any method: a small amount of adhesive mixture or screws. In it you need to clamp a piece of wire that will be connected to the wiring.
7. On the back side, chains or cords are attached to the rings. The second end of these elements is fixed to a hook in the ceiling. The wire must be routed through one of the circuits. Finally, you need to install the light bulbs.

Plywood lace design

Tools for making a wooden lamp.

It should be noted that this design is not ideal from a fire safety point of view. However, in this case, LED lamps are used, which are economical. It should be remembered that such devices practically do not heat up. Therefore, the risk of fire in this case is excluded.

From thin plywood using hand jigsaw you can make masterpieces of applied art. You can make such lamps with your own hands as follows:

1. First of all, you will need to sand the plywood sheet.
2. Using carbon paper, you need to transfer the drawing of the parts.
3. The structural elements will need to be cut along the contour.
4. You will need to drill holes inside each of the pieces that need to be removed. In this case, it is recommended to use a drill 1 mm thick.
5. The next step is to cut out the internal parts.
6. With small files various forms You will need to clean the edges of the structure.
7. Next you need to fasten all the elements together. To do this, it is recommended to use an adhesive mixture. It should be noted that PVA glue may turn yellow after some time. Therefore, it is best to use a special adhesive solution for wood. Remains of the adhesive mixture on visible parts of the structure will need to be carefully removed.
8. At the end, the product should be varnished.

If you plan to use incandescent lamps, you should remember that their power should be less than 40 W.

They need to be placed at the maximum possible distance from wooden elements. Only in this case can the lamp overheat be avoided.

Other options for wooden lamps

You can make other lamps with your own hands:

1. Construction made of boards and rope. In this case, several matte lampshades are used as light sources. There is nothing complicated in making such a design. It should be noted that in this case, only energy-saving or LED light bulbs should be used. Incandescent lamps high power Quite often they create a fire.
2. Bars with pots. To drill through the bottoms of the pots, use a tile drill. In this case, it is not allowed to install incandescent lamps of any power.
3. A chopped log with soffits. It should be taken into account that it is difficult to hollow out the product.

Making lamps from wood with your own hands is quite simple. You just need to show your imagination and prepare all the elements that will be needed to make the structure.

Nothing adds coziness to your interior like objects made of wood: tables, bedside tables, beds or pleasant, pleasing things to the eye - crafts, paintings and other little things. Have you ever thought how stylish and homely lamps made of wood will look?

4 master class on how to make a chandelier from wood - very stylish and modern!

Watch the master classes offered below, evaluate the photos of the finished wooden chandeliers– you will be amazed by the ease of manufacture and the elegance of the forms. Such DIY wooden chandeliers will look harmonious in any room - from the hallway to the bedroom, moreover, they can be hung on the veranda or in the garage - they will emit warm, romantic diffused light everywhere.

What makes up the geometry of the room? From the placement of walls, furniture, tulle, paintings... Add more style to your room by introducing the geometry of a chandelier! So stylish ceiling lamp from wooden slats It’s not difficult to make but looks very impressive.

Materials and tools

• 18 wooden slats (posts);
• construction stapler with staples;
• metal pendant for a chandelier;
• metal paint;
• jigsaw;
• ruler;
• pencil.

Installation process

Let's prepare the frame of the chandelier - wooden posts. They will be natural in color.

• Let's cut first 4 identical high columns- according to the height of the chandelier.
• Then let's make 8 more - for transverse inserts.

Step 2: We make the frame of the chandelier.

• Let's make the first frame. Let's take it 2 long guides, put them parallel to each other, 2 short - across between them and fasten them in all corners with a construction stapler.
• We also use a second pair of long slats. It turned out to be 2 frames. Using the same stapler, we connect them with other transverse slats. It turns out to be a kind of cube.

Let's add a designer touch to the frame - we'll lay another diagonal rail through each side of the cube. To do this we will cut one corner of the rail at 45 degrees and apply it to one of the sides for fitting.

Step 3.

• Mark with a pencil and cut off with a jigsaw.
• We attach the diagonal with a construction stapler, as shown in the photo.
• We will do the same for the other parties.

Step 4: Attachment

The model of this chandelier does not include a lampshade, so we take a ready-made blank for the lamp - an original pendant for the lamp. Let's paint it in favorite color and leave to dry.

Step 5.

While the paint is drying, we will make a hole in the frame to secure it to the factory hanger. The diameter of the hole should not be much larger diameter pipes so that the lamp does not fall through.

But in any case with inside you need to tighten the washer or proprietary limiter.

When the suspension is dry, we fix it to the ceiling, then put on the lamp frame, tighten the limiter and screw in the light bulb.

Looking at this chandelier, you will understand that you would not find it in any store. It will become a favorite decoration of even the simplest and smallest room and will definitely be an artful addition to your home interior.

These master classes are intended for anyone who would like to learn or improve their skills in making practical, unique and quite elegant wooden chandeliers with their own hands. The advantages of these products are that wood is easy to process, it is safe, because all conductive parts are hidden in insulated housings, and you can fit chandeliers made by yourself into any interior!

Master class No. 2. Designer chandelier made of wood

A simple creative lamp made of wood can be used as a night light, if you make it so that little light passes through, or as a chandelier, with fewer stripes.

Materials and tools:

• very thin wooden plywood or thick sheets of paper (the main element of the lamp);
• glue for wood or paper (PVA);
• clamps or clips (useful only during the process);
• a wire with a socket and a plug (if it is a lamp from a general power supply);
• pencil;
• scissors or paper knife.

Chandelier assembly

If you don't have ready-made strips, you can cut them from a piece thin plywood or thick paper. You can mark the strips with a pencil or cut them straight away, because they don’t have to be the same. Any design solutions are welcome!

Glue the strips together. We make a rim of the desired diameter from each strip and glue it overlapping with PVA or wood glue.

It is better to glue immediately, creating the final design of the chandelier, since from the rims different diameters In the end it will be difficult to make one figure. Insert strips between others and fasten them together with clamps.

• It is necessary to make a mount for the socket and lamp. Use energy saving light bulbs and when the power is on, do not touch the electrically conductive parts of the cartridge.
• Let's cut it out square piece of plywood and make a hole in it for the cartridge. To do this, you need to circle the inner diameter of the cartridge so that later it does not slip through.

• We cut a hole with a knife and fix the cartridge in it.
• We drag the wire through the lamp, taking into account how it will hang.
• Then we fix the cardboard itself with the socket in the lamp using glue, as shown in the photo.

To dry, secure the plywood with two clamps. Let's leave it for a while.

When the glue has dried, remove all clamps. All that remains is to hang the lamp you made with your own hands, where it will delight you every day!

Master class No. 3. Wall lamp made of wood

If you like bright electric lights and romance simple details– watch this master class. Nothing complicated, but original and stylish. A very simple wall lamp made of wood in a loft style.

Materials and tools:

• wooden bracket (can be purchased at home improvement stores, such as IKEA);
• cartridge with plug and textile cable;
• spray paint on wood;
• old box or newspapers;
• signets.

Manufacturing technique

Take an unnecessary box or spread newspaper to paint the bracket. It is better to do this with gloves so as not to get dirty. Spray paint over the entire surface. If the color saturation after the first painting does not satisfy you, leave the part to dry, then cover it with a second layer and leave it to dry again.

We insert a textile wire into the hole in the bracket and make one turn around the bracket. Textile wire is the highlight of this lamp, but you can use any wire.

We insert the other end of the wire into the socket and make zero and phase wiring in it.

We secure the bracket to the wall with screws or dowel nails. Screw the pear-shaped light bulb into the socket and insert the plug into the socket. How lovely! And in the evening, when these light bulbs - single source light, they create a romantic mood of a summer evening.

Master class No. 4: Lamp with wood veneer

Fantastic pendant lamp from flexible wood plywood will serve as a decoration for a dining room or bedroom; its rounded shapes and neutral colors will complement any interior.

Materials and tools:

• a piece of flexible plywood board (its length determines the height of the chandelier + a small piece for fastening);
• 2 wooden hoops (you can use hoops of the same or different diameters);
• office or construction clips;
• glue gun ( hot glue);
• long ruler;
• pencil;
• knife or large scissors.

Lamp manufacturing technology

Step 1: Prepare the cartridge mount.

1. We take a hoop of smaller diameter and a piece of plywood board. Place the hoop on the board and trace the inner diameter with a pencil.
2. Cut out a circle (or almost a circle - a piece sufficient to secure the lamp).
3. In the center of the circle, cut out a smaller circle - the diameter of the cartridge.
4. Take hot glue or wood glue and glue the circle with the hoop.

Step 2.

Take the second piece flexible plywood and fix it on the table for accurate measurements. Take a ruler and pencil and draw parallel lines - approximately 2 cm wide.

But you can make the stripes as wide as you like - narrower or wider depending on your preferences.

We cut the plywood into equal strips. We will need 4 additional strips to adhere the rims to each other. These strips will be shorter than the others (almost half as long).

Step 3.

• We fix 4 short stripes on lamp. To do this, use one clamp to hook one strip on the small hoop from above and a second clamp from the bottom on the large hoop.
• We repeat this procedure on 4 sides, as shown in the photo (in order for the chandelier to be level, the hoops must be positioned strictly parallel to each other).

Step 4.

1. We attach the remaining strips in the same way, starting with four on all sides, and then filling the voids between them (this should be done for overall symmetry).
2. The strips should be equally curved so that the chandelier looks like a lantern.
3. Latest 2 strips must be left to hide the clips.
4. We glue them one at a time - each according to the diameter of the hoop. You can glue it overlapping - it will be invisible.

All that remains is to hang the lamp and secure the socket in the hole. The air lamp is ready!