The tabletop is upper part table, which is its main component, which determines the possibility of using this type of furniture.

In the manufacture of countertops, various types of natural and artificial materials, such as: wood, stone, various types of plastics. When using wood and materials made from wood waste (chipboard, plywood, OSB), which are the easiest to process, you can make a tabletop with your own hands at home.

The undoubted advantage of using wood is that it is an environmentally friendly material, which also has a number of undeniable advantages, This:

• Easy to process, allowing you to make a wooden tabletop with your own hands, of various geometric shapes and sizes.
• The variety of wood species used in production makes it possible to combine such products with various types of other finishing materials: glass, tile, metal, etc.
• The beauty and warmth of natural material allow it to be used in the design of tables of various types (kitchen, dining, work, etc.).
• Easy to maintain and maintain, and with proper care, long service life.
• Possibility of performing local, local repairs and reconstruction.
• The cost is lower than that of analogues made from natural stone.

Having said about the advantages, we cannot forget about the disadvantages, which are:

• Low resistance to external influences, such as: high temperature, humidity, mechanical damage(cuts, scratches).
• Required for maintenance special means without damaging the outer surface.
• In case of damage - required special processing and repairs (grinding, varnishing, waxing, etc.).

Tree selection

When choosing a material important has the purpose of the table on which the tabletop is mounted and its location.

The selection criteria are:

1. Durability.

This indicator determines the ability of the material to withstand mechanical and thermal loads, as well as prevent moisture.

1. Hygiene.

It is characterized by the ability to be treated with detergents and other sanitary and hygienic products.

1. Practicality.

It is characterized by the durability and hygiene of the material, as well as its ability to be restored and repaired.

To make a tabletop, a board with a thickness of at least 25.0 mm and a high degree of drying can be used. Its humidity should be no more than 12.0%.

The raw materials for the production of boards can be oak, cherry, walnut, teak, iroko, Siberian larch, linden, birch, spruce or pine.

In addition, solid wood, straight plank or furniture board, which are made from the above listed wood species.

Straight planken – wooden board with hewn sharp edges. Plankens come in straight, beveled and straight with grooves.

Furniture board is a natural material made from wooden blocks connected to each other by gluing.

Table size

The size of the table and tabletop, in particular, depend on its purpose and type of use.

It should be comfortable to sit or stand at the table, as well as to use cabinets and other furniture hung (installed) above the table surface.

When determining the size of the countertop used in the kitchen, the following are considered optimal:

• height – 850 – 900 mm;
• depth – 600 – 800 mm.
• length - depending on the size of the table.

The installation height and depth of the tabletop must correspond to the height of the user, which can easily be varied when independently manufacturing furniture for various purposes.

Materials and tools

Hard wood is used to make countertops, especially for products used in the kitchen and in rooms with high humidity(bathroom, laundry room and the like).

As already written above, it can be oak, cherry, walnut, teak, iroko, Siberian larch, less often - linden, birch, spruce or pine.

For self-made of this piece of furniture, you will need the following tool:

• planer (jointer) manual or electric;
• wood saw or electric jigsaw;
• drill or screwdriver;
• wood cutters;
• thicknesser;
• angle grinder(“grinder”) with a set of grinding wheels;
• files, sandpaper;
• tape measure, square;
• pencil, scriber, chalk.

To assemble and finish the countertop you will need:

• stain of the required color shade;
• antiseptic substances and materials;
• varnish or paint;
• wood glue.

How to make a wooden tabletop with your own hands

The manufacturing technology depends on the material used in the work: boards, straight planks, solid wood or furniture panels.

Manufacturing from boards and straight planks

When using a board and straight plank, the manufacture of a tabletop is carried out in the following sequence:

• boards (planken) are cut to the required length and in the required quantity;
• the outer surface of the boards is processed with a plane and jointer;
• grooves are cut in the side ends of the boards; for this, an electric jigsaw or a special machine is used;
• The slats are cut from a material similar to that used to make the tabletop. The thickness of the slats should correspond to the width of the sawn groove.
• the manufactured slats are inserted into the groove on one of the sides of the prepared boards. When installing the slats in the groove, wood glue is placed there.
• when the slats are inserted, the boards are connected to each other in such a way that the slats fit into the free groove of the adjacent board. This also uses wood glue.
• after all the boards are connected to each other, they are compressed by installing clamps or other devices that provide compression to the assembled sheet.
• When the glue dries, the outer surface is sanded and tinted.
• carried out antiseptic treatment assembled structure.

Manufacturing from furniture board

When a furniture panel is used in the manufacture of a tabletop, the work is performed as follows:

• the furniture panel is cut in accordance with the dimensions required for the table being constructed.
• With inside furniture panel is reinforced, for which it is used wooden block, lath The installation of these elements ensures the strength of the structure under loads in the vertical plane (deflection strength).
• if it is necessary to install the legs, the fastening elements are mounted and installed; when installing the table top on the table frame, the necessary fasteners (tenons, corners, etc.) are installed.
• The outer surface is ground and polished.
• treated with water-repellent substances and painted, if necessary.

Plastic coated

Regardless of what technology and what material the tabletop is made of, it can be covered with plastic, which will improve the performance of this piece of furniture.

Plastic is used if work surface damaged during the operation of the table or initially during its manufacture.

There are similar products on the market large number various types plastic, differing in technical specifications(density, thickness), geometric dimensions and color options.

To finish the tabletop, plastic is cut in accordance with the required dimensions, and then glued to the outer surface. The edges of the tabletop can also be lined with plastic.

Used for gluing special adhesives, adhesive mastics or liquid nails.

Prefabricated countertop cover

When using boards in the manufacture of canvas, in order to hide their ends, a lining is made, which is a protective edge made of bars along the entire perimeter of the tabletop.

The lining is fastened to the tabletop using the “edge-groove” technology.

Finishing of the trim (grinding, polishing, painting) is carried out simultaneously with the execution of these works on the tabletop canvas.

When furniture board is used, the edge finishing is done in the same way.

In order for a hand-made tabletop to serve for a long time and delight its user, it is necessary to carry out maintenance on it proper care, ensure its cleanliness, avoid excessive mechanical stress and exposure to high temperatures.

Apartment design in an ecological format does not go out of fashion. Interior items that are as close as possible to textured natural objects are associated with the natural nature of man. The table, the production of which is proposed, is not only environmentally friendly. Its basis is a single piece of solid wood, it will not only be pleasant to look at during lunch or board games, just a friendly conversation over a cup of tea, it’s nice to touch it with your hands.

The master class offered for consideration on our website will tell you how to make a table for the kitchen from a solid cut of wood, or coffee table. You can vary the sizes to create suitable pieces of furniture for your interior. The work to create this designer piece is not difficult. As a result, you can gain skills, aesthetic taste, and create even more professional things in the future.

Required tools and materials

Wooden cut. Select thickness and other dimensions in accordance with your idea. For a coffee table, this could be a thinner, narrower cut of wood. The kitchen table requires somewhat larger sizes.
Furniture screws. Wood varnish or other coating. Glue.

Among the tools you will need is a saw; plane; sandpaper or grinder; drill; screwdriver or screwdriver; other tools.

You will need a beautiful solid piece of wood with an attractive pattern. It is important that there are no knots on the board, as they may fall off while working on the table and defects will have to be corrected. However, if you are able to disguise minor damage, the knot can turn into decorative decoration table. In the presented case, the damaged area was corrected using wooden disguise– inserts. Glue was also used.

Step by Step Actions

Whole wide board needs to be dried well. If this is not done, deformations and cracks may appear. This blank is not suitable for a tabletop. The thicker the wooden board, the easier it is to process. If the cut is too thin, an inexperienced craftsman may inadvertently split the tabletop during the work. If it is too thick, the table will look massive and will be difficult to move. Normal thickness is 30-50 millimeters.

Tabletop processing

It is necessary to remove all bark from the prepared piece of wood. You can use a knife or chisel. Do not forget about safety precautions, use protective gloves. For better removal of bark, use a wire brush.
Now you can plan the board with a plane.
At the next stage we use sandpaper. If you have grinders, that's just great. You need to process the top and bottom of the tabletop. Use coarse grains first and gradually move on to the finest grains. Don't forget about the edges.

Making the base

There will be four legs and two boards to connect the legs. The latter need to be rounded and the grooves connected, using wood glue.

Final surface preparation

Now you can begin decorative processing. Sand the surface again to avoid any roughness from any remaining dust. Proceed to paintwork. If you want to preserve the wood texture, use clear varnish. To avoid defects, try varnishing or painting scraps of the same material. Use a brush or roller. The latter are more convenient for large surfaces, since the layer will be more uniform. After 1 coat has dried, see if you should apply another one.
Wait until the product dries.

Final assembly

Take the four table legs and the crosspiece and secure them together by assembling the bases. Install and secure furniture screws tabletop on it. It is important to pre-drill holes for the screws to prevent cracks from appearing.

All. A beautiful innovative table made from a piece of solid wood is ready. It could be kitchen table, on which natural products will look great. Or a coffee table that will give your living room a natural, natural look.

Natural wood in the kitchen? Yes, and this article will blow your doubts to smithereens! A wooden tabletop is one of the most good decisions for the kitchen, practical and convenient. You just need to know these 6 professional secrets.

Should there be a wooden countertop in the kitchen? We asked real professionals: qualified designers, craftsmen, technologists and wood specialists - those whose opinions you can trust.

1. Why is a wooden countertop not scary?

On the one hand, smooth, warm wood with a beautiful natural structure - excellent material for furniture production. Easy to use, environmentally friendly, always fashionable and relevant. Moreover, the tabletop is not a heavy wooden buffet that is impossible to move. You don't have to make all your furniture out of wood, it makes perfect sense. modern solution Only the table top and, perhaps, some other individual parts will be made from this material.

But many are afraid of how wood may behave, they are afraid of fungus, cracked varnish...

But professionals think differently: “A wooden countertop is not a problem if you apply reasonable, adequate care to it. There are not many materials used for countertops in non-professional kitchens that are not afraid of any impact and do not require maintenance - says Andrey Lyamin-Borodin, builder, general manager online repair ordering service PriceRemont. “All materials age during use, but the peculiarity of wood is that it can age gracefully.”

So what are we dealing with? Mikhail Vychuzhanin, wood finishing specialist, North House, determines the advantages and disadvantages wooden countertops So.

• environmental friendliness of the material;
• beauty and variety of wood texture;
• unlimited product parameters: almost anything can be made from wood in any way;
• easy to update;
• the ability to perform any milling of the edge of the tabletop.

• more careful care is required;
• restoration will be needed after some time;
• relative high cost of the material and work with it.

2. Which wood to choose for the countertop?

Here is the answer to the question of what types of wood and wood characteristics are worth paying attention to.

“When deciding on a wooden countertop in the kitchen, please forget about MDF, chipboard and veneer. Only natural wood, advises Artyom Lepyoshkin, General Director of the Dynasty House of Interior Solutions. It's not a matter of harmfulness, but of the properties of the material. The countertop is exposed to aggressive human influence every day: crumbling, cutting, whisking, spilling and spilling are a common occurrence in the kitchen. The surface must be durable, smooth, resistant to cuts, moisture and temperatures.

The classic option is oak or beech: strong and durable wood species. Some choose teak and mebrow. More affordable options: pine, walnut, ash, birch. We prefer larch: you will have to pay more, but it will also last longer. The peculiarity of larch is the very high density of wood; the growth rings are located along the trunk with small intervals. It easily tolerates mechanical damage and deformation, and can withstand high compression and pressure loads. It contains gum - a natural antiseptic that protects against rotting and damage by mold. Ideal for the kitchen. Larch gives off and absorbs moisture when humidity changes.

The manufacturing method also affects durability. A solid wood tabletop is more likely to warp than a laminated tabletop assembled from several plates. This method increases flexibility and elasticity.”

“Attention should be paid to such points as: the age of the wood, the method of its extraction, storage conditions, the region where the material was brought from,” adds Mikhail Vychuzhanin. Most best breed He considers oak to be the wood used for making countertops. - The stronger and harder the wood, the longer your countertop will serve you. There are countertops made from solid birch, cherry, and walnut.”

3. How to cover a wooden countertop in the kitchen: Belinka

With the question of how to protect the wood of the tabletop, we turned to Chief technologist of TM Belinka Valery Ermakov.

“The ideal option for protecting a wooden tabletop is bio-impregnation based on natural vegetable oils and beeswax - that is, oil-wax for wood. Natural oils for wood they can make its surface waterproof, which means that the wood is not afraid of fungus and mold. By the way, a countertop impregnated with high-quality oil and wax becomes resistant to standard kitchen detergents - nothing bad will happen to wood from diluted household chemicals. It is even better and more reliable to treat the kitchen work surface with a special oil for wood that comes into contact with food. And of course, no one canceled the more familiar coatings - interior varnish for wood or a combination of colored azure with subsequent application of varnish.”

4. How practical is a wooden countertop?

How to protect wood besides using wood products?

“If you want your countertop to last longer and maintain its appearance, follow simple rules: do not cut anything directly on the tree (perhaps only oak will endure such violence), do not test the surface for fire resistance and heat resistance, continues Artyom Lepyoshkin. - Very hot objects can darken wood, ash is especially sensitive. But if you spill wine or juice on the surface, just wipe it with a damp microfiber cloth. Do not use wet rags, this will cause the wood to swell.”

Andrey Lyamin-Borodin advises against using aggressive household chemicals for washing the countertop: “It happens that drops of such a product fall on the countertop when cleaning the sink or hob. If this product contains, for example, a solvent, it can change the color of the wood and whiten it. Important rule If any stains get on the countertop, do not allow them to be deeply absorbed, and therefore remove them immediately. A stain that cannot be washed off can be removed by walking over the area with fine-grained sandpaper, after which the protective coating will need to be renewed.

On the issue of choosing a sink - it is in in this case must be mortise or, in other words, invoice. Washing an under-table installation will create constant exposure to water on the edge of the countertop, which will inevitably cause it to deteriorate. However, lovers of country style or those with countertops made of particularly water-resistant wood may not be bothered by this.”

5. Will this countertop suit my design?

Wooden surfaces in the kitchen also offer wide design possibilities and are a current trend. Here's what designers think about it.

“The world is becoming more urbanized, and people are experiencing stress due to lack of communication with nature. Natural materials in the interior, such as wood, stone, clay help to modern man feel comfortable in the “concrete jungle,” comments Valentina Konstantinova, creative designer at Kashirsky Dvor company.

The designer gives examples of using wooden tabletops in “star” interiors: “Jake Gyllenhaal, the star of the movie Source Code, uses a wooden tabletop in a Provence-style interior. Kitchen apron finished small tiles“hog”, and the furniture is exactly like in the south of France: delicate blue color with chamfer and retro handles.

Since wood is not a moisture-resistant material, the part of the countertop adjacent to the sink can be replaced with a surface made of artificial stone, like in Sarah Jessica Parker's kitchen. The wooden countertop fits perfectly into the modern urban interior of the actress’s kitchen, built on contrasts of textures and colors - white stone and dark brown wood."

Interior studio designer LOFT & HOME Anastasia Yarysheva believes that you can find a place for wood in a kitchen in any style, it is only important to approach the matter correctly. “So, a tabletop made of solid wood with knots, uneven texture, and aging effects will suit a kitchen in a rustic or loft style. But the smooth ones wooden surfaces will look great in modern interiors, high-tech, especially tinted in white, black or graphite - such a tabletop will combine effectively with chrome and glass surfaces. It is worth paying attention to options made from laminated wood - perhaps even from different species: the rhythmic pattern of the elements can emphasize the beautiful geometry of the room.

6. How to update wood countertops?

Sooner or later, the surface of the wooden tabletop will have to be renewed - the wood will have to be re-saturated with oil. How often should this be done?

“It’s difficult to name a specific date; a lot depends on specific conditions operation, - answers Belinka brand technologist. - To understand whether it’s time to renew the countertop, apply a few drops of water to the surface and observe - if the wood quickly absorbs them, it’s time to take out a jar of oil. However, don’t worry, applying oil is not a difficult task, every housewife can handle it on her own.”

We wrote more about this in our blog.

Resume

Wooden table top - great solution For modern kitchens, and there is absolutely no need to be afraid of using wood in the kitchen. A little care for wood - and your kitchen will delight you for many years!

All photos from the article

Despite the abundance of modern high-quality and quite presentable materials, the tabletop is made of natural wood still remains a sought-after product. Moreover, the craze of recent years for everything natural has brought such countertops to the top sales. People no longer want to live in concrete jungles made of glass and concrete, they want the natural warmth of natural wood.

Our site could not remain indifferent and, based on own experience, we have systematized the most exciting issues on this topic. Based on this analysis, this article was born, from which you will learn about the reasons for such popularity and how to make a wooden tabletop with your own hands.

What is the secret of popularity

For centuries, our ancestors used wood for construction and home improvement.

Such furniture was, is and will remain at the peak of popularity and there are many reasons for this, here are just a few of them:

• It is difficult to find a more environmentally friendly material. Wood itself has natural warmth. Plus, with proper processing, such a table top made of wood will have a very beneficial effect on the aura and health of the household.
• From a design point of view, this material fits perfectly into almost any interior. The array lends itself easily to decoration and adapts well to different, sometimes diametrically opposed, styles.
• Such furniture can have different shapes In addition to classic rectangular and square tables, you can order or cut a plane of any configuration with your own hands.

• If you properly process such an array, it will not be afraid of biological pests, moisture and straight sun rays. As a result, the table will feel good both in the house and on the veranda or in the open gazebo.
• A tabletop made of natural wood is many times more elastic than natural or artificial stone. Where the stone cracks or begins to crumble, only a small dent will remain on the board, which can then be filled with putty.
• And finally, making wooden countertops with your own hands is quite accessible to a person with basic carpentry skills.

Anyone, even the most perfect and beautiful material has its drawbacks. A tabletop made of natural wood is no exception.

Fortunately there are not many of them:

• The durability of the material directly depends on how to cover the wooden tabletop. Synthetic varnishes have high protective properties, but at the same time they neutralize the environmental component of the material. Natural oils are good, but wood with this treatment quickly darkens in the sun. Plus, any coverage needs to be updated at certain intervals, which means additional costs.
• Compared to glass or stone, wooden table It's easy enough to leave a scratch or dent. Although in fairness it should be noted that repairing such a defect will not be difficult.

• High quality, natural product at all times it was expensive, especially if it was a tabletop made of a single piece of wood, which is very problematic to make on your own in a home workshop.

Alternative options

Everyone knows that the price of good furniture made from natural solid wood is quite high. Therefore, as alternative option Often a wood-look countertop is installed. We will not talk about pure plastic; we will focus only on materials close to wood in composition.

The most affordable option are laminated panels based on chipboard or MDF. The slabs are made from waste from the wood processing industry and are covered with a synthetic film on top, onto which a background is applied that copies a natural pattern. Thanks to modern technologies, externally, such a slab differs little from natural solid wood.

Veneered coating is much closer to natural wood. Essentially, this is an average, cheaper option. The basis is MDF or a board of an inexpensive species, onto which a thin section of wood of more expensive varieties is glued and pressed.

If you make a round tabletop for a coffee table, then it will serve for decades. But such a product is not suitable for a kitchen or cottage; the veneer will quickly delaminate.

Advice: if you plan to install the stove yourself under kitchen sink or a cutting table, then a factory laminated wood-look countertop will the best option, both in cost and quality. In any decent hardware store There is large assortment of this product.

If we're talking about When considering a kitchen work surface, it is better to take a synthetic-based varnish for a wooden countertop. Polyurethane compounds for parquet are often used.

If price does not play a big role for you, then you can take urethane-alkyd or, as it is also called, yacht varnish. Acrylic-based coating is not suitable for work surfaces.

Natural oil-based formulations are more suitable for home use. Oil for wooden countertops is usually linseed. If you have heard about mint, spruce or any other oil, then know that they are made by infusing a product, for example, mint, with flaxseed oil in a dark place for 2 weeks. For 1 liter of refined oil, add 1 cup of filler.

Natural wax mastics are made by mixing the same in a water bath linseed oil with clean beeswax. The proportion is selected depending on the type of wood and can range from 1:3 to 1:5.

Important: both varnishing and processing oil compositions done at least 2 times. If you want to achieve good result, you may have to apply up to 7 layers. Moreover, the composition is applied only to a dry surface.

Wood as a manufacturing material home furniture, doors and other interior items have always been especially valued. Especially in the context of our own environmental properties, naturalness. Kitchen wooden furniture and solid wood countertops help improve mood, positive emotions due to the bright natural texture, beautiful tactile sensations and harmonious combination with various culinary smells.

Characteristics of kitchen countertops

Wood in the kitchen looks fashionable and gives the kitchen a special touch

With the help of a correctly selected one, it is quite easy to refine interior design kitchen space, give the interior environmental friendliness, solidity and prestige. Despite the fact that, made of solid wood, today it is somewhat inferior in terms of practicality to some synthetic materials(primarily due to the need for regular maintenance), its attractiveness is a fundamental factor in sustainable demand.

The main characteristics that a high-quality kitchen countertop must meet:

• resistance to moisture;
• resistance to temperature changes, thermal influences;
• ability to withstand mechanical stress;
• ease of care, cleaning, cleaning;
• resistance to the absorption of dirt, foreign odors, condensation, grease;
• high aesthetic and ergonomic qualities.

Modern technologies involve the production of several types of solid wood countertops, which are classified according to two criteria: the type of wood used and the production method.

Today, several types of wood, soft and hard varieties, are used for the production of countertops. Moreover, too hard rocks can dry out over time, which will lead to early deformations and the formation of visible cracks on the surface of the product. And too soft ones can quickly be pressed through during careless handling. Optimal varieties, the most accessible in our area are:
:

• nut;
• cherry;
• ash;
• pine.

Today, two main technologies for manufacturing wooden countertops are used:

• Made from solid wood. These products are characterized by an excellent natural texture. Since the cost of such products is extremely high, they are usually used in expensive classic kitchen sets.
• Made from glued lamellas. It is a collection of perfectly processed and fitted strips of wood. Since each layer can use different varieties wood, it is much easier to build a tabletop that is resistant to temperature influences and more durable than analogues made from solid wood. Only the aesthetics in this case may be lower, since it is difficult to match the lines of wood texture of different lamellas.

Advantages of oak and pine boards

Wood countertops go with almost all styles

These furniture products have the following advantages:

1. 1. Ease of manufacture and. Having special skills and having the appropriate carpentry tools and equipment, you can give tabletops any shape, produce them in any configuration and size. They are also subject to multiple restoration procedures, varnishing, and painting.
   2. Ecological cleanliness. Natural wood is natural natural material, therefore not capable of harm environment, people and pets due to the absence of any harmful/dangerous emissions.
   3. Highest aesthetic qualities. Kitchen countertops Even the most affordable types of wood, which are subjected to minimal processing, always look much more advantageous in the kitchen than most alternative products.

1. Huge selection of textures, colors, wood processing methods will allow you to create a unique product that can become the highlight of a kitchen interior made in any style.
2. Elasticity. Wood is more resistant to minor mechanical impacts when compared, for example, with natural stone. Thanks to some shock-absorbing properties, the appearance of dents and chips on the working surface is eliminated during mild impacts.
3. High wear resistance. Subject to the technology of manufacturing countertops made of solid wood, corresponding to the primary processing and correct operation They easily withstand high temperature and moisture tests.
4. Excellent ergonomic properties. Natural wood is pleasant to the touch and creates a feeling of warmth upon tactile contact due to its low thermal conductivity, in contrast to natural stone and metal.

Natural wood is an environmentally friendly material that looks amazing

Flaws

The easiest way to do this is by unfastening a series of transverse slats from the bottom, placing them on screws and glue.

Installation of natural wood in the kitchen

Installation of the finished countertop is carried out in several stages:

• if a non-prefabricated frame is used for its installation, lower Set the headset sections according to the level gauge readings;
• then using a jigsaw it is necessary cut holes for acrylic or either/and . The edges must be treated with a sealing agent;
• using metal corners and wood screws, you need to securely attach the tabletop to the lower sections of the headset or to a pre-fabricated frame, leaving a gap of several millimeters to the wall;
• left secure the baseboard to the wall using special glue or self-tapping screws (depending on the material of the baseboard and its design features). Don't forget to install For a wooden tabletop to last a long time, it needs to be carefully looked after

  Due to their tendency to deform during use and poor resistance to thermal and damp influences, wooden countertops require more careful care than most products made from other materials:

  • surface cleaning should be done with a slightly damp cloth;
  • Maybe application of soft detergents for gentle cleaning;
  • categorically The use of hard brushes is not allowed, brushes and abrasive cleaning powders;
  • to maintain moisture-proof properties the working surface must be regularly treated special water-repellent compounds;
  • in case of violation paint coating it must be restored immediately.

  If you still haven’t saved your countertop or table, read how you can decorate it using ceramic tiles

  

  Very fashionable in recent years make a table from rough wooden canvas.

  Despite the fairly high cost of such elements furniture designs, many adherents natural materials stop their choice on solid wood. In our other articles you can familiarize yourself with and .