General purpose asynchronous electric motors AO2, AOL2. Asynchronous AC motor Motor AO 2 81 4
General information
Asynchronous motors types AO41-4 and AO41-6 are designed to drive various mechanisms.
Symbol structure
AO41-X U2:
AO - asynchronous, blown closed;
4 - engine size;
1 - conditional length of the stator package;
X - number of poles (4; 6);
U2 - Climatic performance and placement category according to GOST
15150-69 and GOST 15543.1-89.
terms of Use
Height above sea level is not more than 1000 m.
When installing the engine at an altitude of over 1000 m, the rated power is reduced in accordance with the coefficient K (Table 1).
Table 1
Height above sea level, m | 1000 | 1500 | 2000 | 2500 | 3000 | 3500 | 4000 |
K factor | 1 | 0,98 | 0,95 | 0,92 | 0,88 | 0,84 | 0,8 |
Temperature environment from minus 45 to 40°С.
Relative Humidity up to 80% at 20°C.
The cooling air does not contain flammable or explosive impurities.
The content of corrosive agents in the atmosphere according to type II GOST 15150-69.
Dust concentration in the environment up to 10 mg/m 3 .
Group of operating conditions in terms of the impact of mechanical factors M1 according to GOST 17516.1-90.
Motors must be protected from direct impact solar radiation and atmospheric precipitation.
Safety requirements according to GOST 12.2.007.0-75 and GOST 12.2.007.1-75.
Engines meet the requirements of TU IBN.050. 380.
TU IBN.050.380
The main technical data are given in table. 2.
table 2
Parameter name | Parameter value for types | |
AO41-4 | AO41-6 | |
Rated power, kW | 1,7 | 1,0 |
Network frequency, Hz | 50 | |
Rated voltage, V | 220/380 | |
Rated current 1) , A | 6,7/3,9 | 4,8/2,8 |
Speed, min -1 | 1500 | 1000 |
81,5 | 77 | |
0,82 | 0,72 | |
Slip, % | 5,4 | 7 |
I start / I nom | 5,0 | 6,0 |
M start / M nom | 1,8 | 1,3 |
M max / M nom | 2,0 | 1,8 |
Moment of inertia of the rotor, kg m 2 | 0,044 | |
Weight, kg, versions: | ||
32 | ||
36 |
1) The current values given in the numerator correspond to a voltage of 220 V, in the denominator - to a voltage of 380 V.
Continuous operating mode (S1) according to GOST 183-74.
The degree of protection of engines from environmental influences IP44 according to GOST 17494-87.
The method of cooling engines 1C01 according to GOST 20459-87.
Heat resistance class of stator winding insulation A according to GOST 8865-93.
The vibration level corresponds to class 4.5 according to GOST 16921-83.
The noise level does not exceed limit values according to class I GOST 16372-84.
Insulation resistance of motor windings relative to the housing and between phases at operating temperature not less than 1 MΩ.
Average resource up to overhaul- 30,000 hours
Mean time between failures - 23,000 hours.
Fixed time storage - 3 years.
Guarantee period- 2 years from the date of putting the engines into operation with an operating time of 10,000 hours.
Execution according to the method of mounting IM1001 and IM2001 according to GOST 2479-79.
The stator of the electric motor consists of a cast-iron frame, a core made of sheets of electrical steel, and a single-layer random winding laid in half-closed grooves.
The rotor consists of a core mounted on a shaft and a cast aluminum squirrel-cage winding.
Bearing shields and covers are cast, aluminum.
Electric motors are made on N306 ball bearings; the outer race of one of the bearings is not fastened. Grease bearing lubricant.
K-1 output device (without terminal box with free output ends).
The overall, mounting and connecting dimensions of the motors are shown in fig. 12.
General view, overall, mounting and connecting dimensions of electric motors of types AO41-4 and AO41-6, version IM1001
General view, overall, mounting and connecting dimensions of electric motors of types AO41-4 and AO41-6 of execution IM2001 v
The scope of delivery includes: a motor with a key and a passport, technical description and instruction manual.
Three-phase asynchronous electric motors of the AO2-9 series are designed to drive various mechanisms in stationary installations and to operate as a mechanism drive on ships of an unlimited navigation area, except emergency equipment. Made for the needs National economy, as well as for the needs of the Russian Navy with the sea and river registers of shipping of the Russian Federation. Three-phase asynchronous electric motors of the AO2-9 series are also manufactured in accordance with the requirements of regulatory and technical documentation for nuclear power plants.
Motor size designation:
A - asynchronous motor with a squirrel-cage rotor;
About - blown closed;
2 - serial number of the series;
9 - the serial number of the dimension (the height of the axis of rotation is 280 mm);
1,2 - symbol stator core length;
0 - special version with reduced power;
4, 6, 8, 10 - number of poles;
A - special version with acceptance by Rosatom
U, OM - climatic version according to GOST 15150;
3, 4 - placement category according to GOST 15543-70.
Design and installation method: IM 1001, IM 1002, IM 2001, IM2002, IM 3011 (according to GOST 2479-79). At the request of the customer, motors with a different mounting method are manufactured.
Climatic performance- moderate, general climatic marine (U, OM) according to GOST 15150.
Degree of protection from environmental influences IP 44 according to GOST 17494.
Working mode- continuous S1 in accordance with GOST 183-74 (for general industrial) and S1 in accordance with GOST R 52776 (for execution with acceptance by Rosatom and ship execution).
Safety class- 2N according to NP-001 (for execution with acceptance by Rosatom).
Seismic category- I according to NP-031 (for execution with acceptance by Rosatom).
Estimated earthquake level- 9 points on the MSK-64 scale (for execution with Rosatom acceptance).
Type of current- variable three-phase.
Current frequency- 50 and 60 Hz.
Voltage- 220/380V or 380 V. At the request of the customer, it is possible to manufacture motors for a different voltage.
Direction of rotation- any.
Permissible operating height*- 1000 m above sea level.
Operating conditions group:
M1 according to GOST 17516.1-90 (for general industrial design),
M6 in accordance with GOST 17516.1 (for execution with acceptance by Rosatom),
М46 in accordance with GOST 17516 (for marine version).
Engine cooling method- IC01 according to GOST 20459-87 (for general industrial version) and IC0141 according to GOST 20459 (for version with acceptance by Rosatom).
Heat resistance class stator winding insulation not lower than B according to GOST 8865-87 (for general industrial version) and H according to GOST 8865 (for marine version).
Noise level motors must not exceed the limit values:
according to class 3 according to GOST 16372-84 (for general industrial design),
1 class according to GOST 16372-84 (for execution with acceptance by Rosatom),
Table No. 1 GOST R 53148 (for marine version).
*When installing the engine over 1000m, the rated power of the engine must be reduced according to the specifications.
The price of the Asynchronous electric motor of alternating current AO2-92-4u3: contractual in rub. VAT included
Our company carries out complex deliveries of asynchronous AC motors from stock and on order at dealer prices. Delivery to the place, any transport company, at the request of the customer.
Table 1
Main characteristics
Engine's type | N, | U, V | Frequency | I, A | h, % | n. rpm | M, kg | IP |
kW | current, Hz | |||||||
AO2-92-4 | 100 | 220/380 | 50,6 | 306/177 | 93 | 1500 | 635 | IP44 |
N - Power, kW
U - Voltage, V
I - Current, A
h - efficiency, %
n - Rotation speed, rpm
M - Mass, kg
IP - Degree of protection GOST 17494-87
Rice. 1 deviceasynchronous AC motor AO2-92-4u3
table 2
asynchronous AC motor AO2-92-4u3
IM1001-1081 Paw execution
Type | L | l1, | l2, | l10, | l11, | l30, | l3, | l33, | b, | b1, | b2 | b10, |
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | |
AO2-92-4 | 1167 | 140 | 140 | 419 | 510 | 1025 | 190 | 540 | 547 | 20 | 18 | 457 |
Type | b20, | b30, | h, | h1 | h2 | h5, | h6, | h31, | h34, | d1, | d2, | d10, |
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | |
AO2-92-4 | 358 | 684 | 280 | 12 | 12 | 74,5 | 64 | 622 | 552 | 70 | 60 | 22 |
Rice. 2 Overall, installation and connecting dimensions
asynchronous AC motor AO2-92-4u3
IM1001-1081 Paw execution
Table 3
Overall, mounting and connecting dimensions
asynchronous AC motor AO2-92-4u3
IM2001-2081 Performance Combi
Type | L | l1, | l2, | l3, | l10, | l11, | l30, | l33, | l31, | b, | b1, | b2, | b10, | b20, | b30, |
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | |
AO2-92-4 | 1167 | 140 | 142 | 399.5 | 419 | 510 | 1025 | 190 | 540 | 547 | 20 | 18 | 457 | 358 | 684 |
Type | h, | h1 | h2 | h5, | h6, | h31, | h34, | d1, | d2, | d10, | d24, | d20, | d25, | nxd22 | - |
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | |||
AO2-92-4 | 280 | 12 | 11 | 74.5 | 64 | 622 | 552 | 70 | 60 | 22 | 225 | 500 | 275 | 8x18 | - |
Rice. 3Overall, mounting and connecting dimensions
asynchronous AC motor AO2-92-4u3
IM2001-2081 Performance Combi
Table 4
Overall, mounting and connecting dimensions
asynchronous AC motor AO2-92-4u3
IM
Type | L | l1, | l31, | b, | b1, | b10, | b20, | b30, | h, | h1 | h5, | d1, | d25, | d20, | d24, | nxd22 |
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | ||
AO2-92-4 | 1025 | 140 | 539,5 | 584 | 20 | 660 | 358 | 684 | 292 | 12 | 74,5 | 70 | 225 | 500 | 275 | 8x18 |
Rice. 4 Overall, mounting and connecting dimensions
asynchronous AC motor AO2-92-4u3
IM3001 -3081 Version Flange
Table 5
Overall, mounting and connecting dimensions
asynchronous AC motor AO2-92-4u3
IM
Type | L | l1, | l2, | l3, | l10, | l11, | l30, | l31, | l33, | b, | b1, | b2, | b10, |
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | |
AO2-92-4 | 1167 | 140 | 142 | 400 | 419 | 510 | 1025 | 190 | 540 | 547 | 20 | 18 | 457 |
AO2-92-4 | 1167 | 140 | 142 | 400 | 419 | 510 | 1025 | 190 | 540 | 547 | 20 | 18 | 457 |
Type | b20, | b30, | h, | h1 | h2 | h5, | h6, | h31, | h34, | d1, | d2, | d10, | - |
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | ||
AO2-92-4 | 358 | 683 | 280 | 12 | 11 | 74,5 | 64 | 622 | 552 | 70 | 60 | 24 | - |
AO2-92-4 | 358 | 683 | 280 | 12 | 11 | 74,5 | 64 | 622 | 552 | 70 | 60 | 24 | - |
Rice. 5Overall, mounting and connecting dimensions
asynchronous AC motor AO2-92-4u3
IM1001-1081 Execution Multi-speed paws
PURPOSE AND APPLICATION
Asynchronous AC motor AO2-92-4u3
The three-phase asynchronous electric motor AO2-92-4u3 is designed to drive various mechanisms in stationary installations and to operate as a mechanism drive on ships with an unlimited navigation area, except for emergency equipment. It is produced for the needs of the national economy, the Russian Navy with the sea and river registers of shipping of the Russian Federation.
The three-phase asynchronous electric motor AO2-92-4u3 is also manufactured in accordance with the requirements of regulatory and technical documentation for nuclear power plants.
The design of an asynchronous AC motor AO2-92-4u3
Design and installation method: IM 1001, IM 1002, IM 2001, IM2002, IM 3011 (according to GOST 2479 - 79). At the request of the customer, motors with a different mounting method are manufactured.
Climatic performance- moderate, general climatic marine (U, OM) according to GOST 15150.
Degree of protection against environmental influences IP 44 according to GOST 17494-87.
Working mode- continuous S1 in accordance with GOST 183-74 (for general industrial) and S1 in accordance with GOST R 52776 (for execution with acceptance by Rosatom and ship execution).
Safety class– 2N according to NP-001 (for execution with acceptance by Rosatom).
Estimated earthquake level– 9 points on the MSK-64 scale (for execution with Rosatom acceptance).
Type of current- variable three-phase.
Current frequency– 50 and 60 Hz.
Voltage– 220/380V or 380 V. At the request of the customer, it is possible to manufacture motors for a different voltage.
Direction of rotation- any.
Permissible operating height*– 1000 m above sea level.
Operating condition group
M1 according to GOST 17516.1–90 (for general industrial design)
M6 in accordance with GOST 17516.1 (for execution with acceptance by Rosatom)
М46 in accordance with GOST 17516 (for marine version).
Engine cooling method– IC01 according to GOST 20459–87 (for general industrial version) and IC0141 according to GOST 20459 (for version with Rosatom acceptance).
Heat resistance class of stator winding insulation not lower than B in accordance with GOST 8865–87 (for general industrial execution) and H in accordance with GOST 8865 (for ship execution).
Noise level engines should not exceed the limit values: according to class 3 according to GOST 16372–84 (for general industrial execution), according to class 1 according to GOST 16372–84 (for execution with acceptance by Rosatom), Table No. 1 GOST R 53148 (for ship execution) .
*When installing the engine over 1000m, the rated power of the engine must be reduced according to the specifications.
Conventions
Asynchronous AC motor AO2-92-4u3
A - asynchronous motor with a squirrel-cage rotor;
O - blown closed;
2 – serial number of the series;
92 - the serial number of the dimension (the height of the axis of rotation is 280 mm);
1, 2 - symbol for the length of the stator core;
0 - special version with reduced power;
4, 6, 8, 10 - number of poles;
A - special version with acceptance by Rosatom
The price of the Asynchronous electric motor of alternating current AO2-91-6u3: contractual in rub. VAT included
Our company carries out complex deliveries of asynchronous AC motors from stock and on order at dealer prices. Delivery to the place, by any transport company, at the request of the customer.
Table 1
Main characteristics
Engine's type | N, | U, V | Frequency | I, A | h, % | n. rpm | M, kg | IP |
kW | current, Hz | |||||||
AO2-91-6 | 55 | 220/380 | 50,6 | 177/102 | 92,5 | 1000 | 520 | IP44 |
N - Power, kW
U - Voltage, V
I - Current, A
h - efficiency, %
n - Rotation speed, rpm
M - Mass, kg
IP - Degree of protection GOST 17494-87
Rice. 1 deviceasynchronous AC motor AO2-91-6u3
table 2
asynchronous AC motor AO2-91-6u3
IM1001-1081 Paw execution
Type | L | l1, | l2, | l10, | l11, | l30, | l3, | l33, | b, | b1, | b2 | b10, |
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | |
AO2-91-6 | 1116 | 140 | 140 | 368 | 460 | 970 | 190 | 514 | 547 | 20 | 18 | 457 |
Type | b20, | b30, | h, | h1 | h2 | h5, | h6, | h31, | h34, | d1, | d2, | d10, |
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | |
AO2-91-6 | 358 | 684 | 280 | 12 | 12 | 74,5 | 64 | 622 | 552 | 70 | 60 | 22 |
Rice. 2 Overall, installation and connecting dimensions
asynchronous AC motor AO2-91-6u3
IM1001-1081 Paw execution
Table 3
Overall, mounting and connecting dimensions
asynchronous AC motor AO2-91-6u3
IM2001-2081 Performance Combi
Type | L | l1, | l2, | l3, | l10, | l11, | l30, | l33, | l31, | b, | b1, | b2, | b10, | b20, | b30, |
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | |
AO2-91-6 | 1116 | 140 | 146 | 374 | 368 | 460 | 970 | 190 | 514 | 547 | 20 | 18 | 457 | 358 | 684 |
Type | h, | h1 | h2 | h5, | h6, | h31, | h34, | d1, | d2, | d10, | d24, | d20, | d25, | nxd22 | - |
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | |||
AO2-91-6 | 280 | 12 | 11 | 74.5 | 64 | 622 | 552 | 70 | 60 | 22 | 225 | 500 | 275 | 8x18 | - |
Rice. 3Overall, mounting and connecting dimensions
asynchronous AC motor AO2-91-6u3
IM2001-2081 Performance Combi
Table 4
Overall, mounting and connecting dimensions
asynchronous AC motor AO2-91-6u3
IM
Type | L | l1, | l31, | b, | b1, | b10, | b20, | b30, | h, | h1 | h5, | d1, | d25, | d20, | d24, | nxd22 |
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | ||
AO2-91-6 | 970 | 140 | 514 | S84 | 20 | 660 | 358 | 684 | 292 | 12 | 74,5 | 70 | 225 | 500 | 275 | 8x18 |
Rice. 4 Overall, mounting and connecting dimensions
asynchronous AC motor AO2-91-6u3
IM3001 -3081 Version Flange
Table 5
Overall, mounting and connecting dimensions
asynchronous AC motor AO2-91-6u3
IM
Type | L | l1, | l2, | l3, | l10, | l11, | l30, | l31, | l33, | b, | b1, | b2, | b10, |
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | |
AO2-91-6 | 1116 | 140 | 146 | 374 | 368 | 460 | 970 | 190 | 514 | 547 | 20 | 18 | 457 |
AO2-91-6 | 1116 | 140 | 146 | 374 | 368 | 460 | 970 | 190 | 514 | 547 | 20 | 18 | 457 |
Type | b20, | b30, | h, | h1 | h2 | h5, | h6, | h31, | h34, | d1, | d2, | d10, | - |
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | ||
AO2-91-6 | 358 | 683 | 280 | 12 | 11 | 74,5 | 64 | 622 | 552 | 70 | 60 | 24 | |
AO2-91-6 | 358 | 683 | 280 | 12 | 11 | 74,5 | 64 | 622 | 552 | 70 | 60 | 24 | - |
Rice. 5Overall, mounting and connecting dimensions
asynchronous AC motor AO2-91-6u3
IM1001-1081 Execution Multi-speed paws
PURPOSE AND APPLICATION
Asynchronous AC motor AO2-91-6u3
The three-phase asynchronous electric motor AO2-91-6u3 is designed to drive various mechanisms in stationary installations and to operate as a mechanism drive on ships with an unlimited navigation area, except for emergency equipment. It is produced for the needs of the national economy, the Russian Navy with the sea and river registers of shipping of the Russian Federation.
The three-phase asynchronous electric motor AO2-91-6u3 is also manufactured in accordance with the requirements of regulatory and technical documentation for nuclear power plants.
The design of an asynchronous AC motor AO2-91-6u3
Design and installation method: IM 1001, IM 1002, IM 2001, IM2002, IM 3011 (according to GOST 2479 - 79). At the request of the customer, motors with a different mounting method are manufactured.
Climatic performance- moderate, general climatic marine (U, OM) according to GOST 15150.
Degree of protection against environmental influences IP 44 according to GOST 17494-87.
Working mode- continuous S1 in accordance with GOST 183-74 (for general industrial) and S1 in accordance with GOST R 52776 (for execution with acceptance by Rosatom and ship execution).
Safety class– 2N according to NP-001 (for execution with acceptance by Rosatom).
Estimated earthquake level– 9 points on the MSK-64 scale (for execution with Rosatom acceptance).
Type of current- variable three-phase.
Current frequency– 50 and 60 Hz.
Voltage– 220/380V or 380 V. At the request of the customer, it is possible to manufacture motors for a different voltage.
Direction of rotation- any.
Permissible operating height*– 1000 m above sea level.
Operating condition group
M1 according to GOST 17516.1–90 (for general industrial design)
M6 in accordance with GOST 17516.1 (for execution with acceptance by Rosatom)
М46 in accordance with GOST 17516 (for marine version).
Engine cooling method– IC01 according to GOST 20459–87 (for general industrial version) and IC0141 according to GOST 20459 (for version with Rosatom acceptance).
Heat resistance class of stator winding insulation not lower than B in accordance with GOST 8865–87 (for general industrial execution) and H in accordance with GOST 8865 (for ship execution).
Noise level engines should not exceed the limit values: according to class 3 according to GOST 16372–84 (for general industrial execution), according to class 1 according to GOST 16372–84 (for execution with acceptance by Rosatom), Table No. 1 GOST R 53148 (for ship execution) .
*When installing the engine over 1000m, the rated power of the engine must be reduced according to the specifications.
Conventions
Asynchronous AC motor AO2-91-6u3
A - asynchronous motor with a squirrel-cage rotor;
O - blown closed;
2 – serial number of the series;
91 - the serial number of the dimension (the height of the axis of rotation is 280 mm);
1, 2 - symbol for the length of the stator core;
0 - special version with reduced power;
4, 6, 8, 10 - number of poles;
A - special version with acceptance by Rosatom
To drive woodworking machines, asynchronous electric motors of a new series (closed, ventilated and protective) are used. Electric motors of this series with cast iron body are designated A, and with aluminum - AL. The letter O is added to the designation of closed electric motors, indicating that the electric motor is blown (AO, AOL). After the designation A and AL, three digits characterize the electric motor: the first digit indicates the outer diameter of the stator package, the second is the length of this package in arbitrary units, the third digit indicates the number of poles.
Asynchronous electric motors of a single series are produced for standard voltages of 127/220, 220/380 and 500 V, with the connections of the stator windings, respectively: triangle to star, triangle to star and star.
Instead of electric motors of the A and AO series, since 1961 a new series of electric motors has been produced. It has better energy performance, as well as smaller dimensions and weight. A new series of electric motors is designated with the addition of the number 2 (A2, A02, AK.2, etc.). Based on the basic design of electric motors of types A2 and A02, modifications AP2 and AOP2 with increased starting torque are produced; AC2 and AOC2 electric motors with increased slip; AK2 electric motors with a phase rotor; electric motors A2 and A02 are multi-speed.
These electric motors are produced for voltages of 220/380 and 500 V with increased starting torque and a squirrel-cage rotor. Execution closed, blown. Form of execution M-101.
The main technical data of electric motors of the AOP2 series are given in Table. 15.
THREE-PHASE ASYNCHRONOUS ELECTRIC MOTORS AOS2 SERIES (GOST 183-66)
These electric motors are available for 220/380, 380 or 500 V with increased slip and a squirrel-cage rotor. Their main technical data are given in table. 16, 17.
Table 16
Technical data of asynchronous electric motors of the AOC2 series
Power, ket, At syn- |
||||||||
chrono rotation speed, |
||||||||
electric motor |
o/man | kg | ||||||
600 | ||||||||
AOS2-31-4, | 6 | |||||||
AOS2-32-4, | 6 | - | ||||||
AOC2-41-4, | 6, | 8 | ||||||
AOC2-42-4, | 6, | 8 | ||||||
AOC2-51-4, | 8 | |||||||
AOS2-52-4, | 6, | 8 | ||||||
AOS2-61-4, | 6, | 8 | ||||||
AOS2-62-4, | 6, | 8 | ||||||
AOS2-71-4, | 6, | 8 | ||||||
AOS2-72-4, | 8 | |||||||
AOS2-81-4, | 6, | 8, | 10………………………………………. | |||||
AOS2-82-4, | 6, | 8, | 10……………………………………….. | |||||
AOS2-91-4, | 6, | 8, | 10………………………………………. | 58 | ||||
AOS2-92-4, | 6, | 00 | 10………………………………………. |
ASYNCHRONOUS THREE-PHASE CURRENT ELECTRIC MOTORS AK2 SERIES (TU AB.4.12252)
These electric motors are produced with a phase rotor for a voltage of 220/380 and 500 o. They are intended for continuous operation from a network with a frequency of 50 Hz. The execution is protected. Form of execution - M-101.
The main technical data of such electric motors are given in Table. 18.
Table 18
Technical data of asynchronous electric motors of the AK2 series
Power, ket, at |
|||||
rotation speed, rpm |
Weight, | ||||
Motor type |
|||||
1500 | 1000 | ||||
AK2-81-A, | C), 8………………………………………… | 22 | |||
AK2-82 A, | (>, N………………………………………… | 30 | |||
AK2-91-4, | 0, 8………………………………………….. | 40 | |||
AK2-92-4, | 0, 8………………………………………….. | 555 |
ASYNCHRONOUS THREE-PHASE CURRENT ELECTRIC MOTORS A02 and AOL2 SERIES (MRTU 2-015-002-62)
These electric motors (series A02 in cast iron and AOL2 in aluminum shell) for general industrial use with a squirrel-cage rotor, they are produced for a voltage of 220/380 and 500 e. The design is closed, ventilated. Form of execution M-101.
The main technical data of such electric motors are given in Table. 19, 20.
0 Table 19
Technical data of asynchronous electric motors of the A02 and AOL2 series at a synchronous rotation speed of 3000 rpm
Type of electro- |
Power, ket | Weight, | Type of electro- |
Power, |
Weight, |
engine |
engine | ket | |||
AO L 2-11-2 | |||||
AOL2-12-2 | |||||
AOL2-21-2 | |||||
AOL2-22-2 | |||||
AOL2-31-2 | |||||
AOL2-32-2 | |||||
A02-21-2 | |||||
A02-22-2 | |||||
A02-31-2 | |||||
A02-32-2 | |||||
А02-41-2 |
ASYNCHRONOUS THREE-PHASE CURRENT ELECTRIC MOTORS AOLS2 SERIES (STU 79-1957-65)
These electric motors (in an aluminum shell) are produced for voltages of 127/220, 220/380 or 500 V with increased slip and a short closed rotor. Execution closed, blown. Execution form - M-101-The main technical data of such electric motors are given in table. 21, 22.
Technical data of asynchronous electric motors of the AOLS2 series at a synchronous rotation speed of 3000 rpm
Motor type | Power, ket | Weight, kg | Motor type | Power, ket | |
. A0LS2-12-2 | |||||
ELECTRIC MOTORS TWO-SPEED ASYNCHRONOUS THREE-PHASE CURRENT A02 SERIES
These electric motors are available for voltages of 220, 380 and 500 V with a squirrel-cage rotor. Execution closed, blown. Form of execution - M-101.
The main technical data of these electric motors are given in Table. 23.
Electric motors 750/1500 rpm
A02-41- | -8/4 | 1.6 | А02-62-8/4 | |||||
2,5 | ||||||||
A02-42- | -8/4 | 2,3 | А02-71-8/4 | |||||
2,9 | ||||||||
A02-51- | -8/4 | 3,0 | А02-72-8/4 | |||||
4,8 | ||||||||
A02-52- | -8/4 | 4,1 | А02-81-8/4 | |||||
6,6 | ||||||||
A02-61- | -8/4 | 5,5 | А02-82-8/4 | |||||
8,5 | ||||||||
Electric motors | at 1500/3000 rpm | |||||||
A02-31- | -4/2 | 1,8 | А02-51-4/2 | |||||
2,3 | ||||||||
A02-32- | -4/2 | 2,3 | А02-52-4/2 | |||||
2,9 | ||||||||
A02-41 | -4/2 | 3,3 | L02-61-4/2 | |||||
4,1 | ||||||||
A02-42 | -4/2 | 5,5 | А02-62-4/2 | |||||
4,7 |
ASYNCHRONOUS THREE-PHASE CURRENT ELECTRIC MOTORS OF T, FT, F TYPES (TU 2-024-19-66)
On woodworking machines, asynchronous electric motors of types T, FT, F are used as a drive. low power, as well as electric motors of the DPT series.
These electric motors are produced for a voltage of 220/380 V with a mains frequency of 50 Hz. The execution is closed. Execution form for electric motors of type T and F - M-261, for electric motors of type FT - M-361.
The main technical data of these electric motors are given in Table. 24.
Table 24
Technical data of asynchronous electric motors of types T, FT, F
Motor type |
Power, W |
Speed rotation, |
Motor type |
Power, |
Rotational speed, |
||
80 | 1400 | 4,2 | 120 | 2800 | 4,4 | ||
80 | 1400 | 4,4 | 120 | 2800 | 4,4 | ||
120 | 2800 | 4,2 |
THREE-PHASE ASYNCHRONOUS ELECTRIC MOTORS DPT SERIES
These electric motors are manufactured for voltage 127/220 and 220/380 V, frequency 50 Hz, with a squirrel-cage rotor. Execution closed, blown. Form of execution - M-211.
The main technical data of such electric motors are given in Table. 25.
Table 25
Technical data of asynchronous electric motors of the DPT series
Motor type |
Power, W |
Speed rotation, |
Motor type |
Power, W |
Rotational speed, |
||
270 | 1400 | 8,7 |
DPT-22-4/2S2 |
9,8 | |||
500 | 1410 | 9,8 | DPT-22-2S2 | 10,0 | |||
400 | 2800 | 8,7 |
DPT-21-4/2S2 |
8,7 |
THREE-PHASE ASYNCHRONOUS ELECTRIC MOTORS VAO SERIES EXPLOSION-PROOF
These electric motors are produced with a squirrel-cage rotor. They are designed to work in installations with the possible formation of firedamp "(methane), with the presence of explosive coal dust and vapor, gas-air mixtures of 1, 2, and 3rd category of flammability groups. Form of execution - M-101.
Electric motor type |
■2 | ■2 | |||||||
Power, ket, at |
|||||||||
synchronous speed |
|||||||||
rotation 3000 rpm |
|||||||||
Electric motor type |
|||||||||
Power, ket, at |
|||||||||
synchronous speed |
|||||||||
rotation 1500 rpm |
|||||||||
1 Electric motor type |
|||||||||
Power, ket, at |
|||||||||
synchronous speed |
|||||||||
rotation 1000 rpm |
|||||||||
Electric motor type |
|||||||||
Power, ket, at |
|||||||||
synchronous speed |
|||||||||
rotation 750 rpm |
|||||||||
Electric motor type |
|||||||||
Power, ket, at |
|||||||||
synchronous speed |
|||||||||
rotation 3000 rpm |
|||||||||
Electric motor type |
|||||||||
Power, ket, at |
|||||||||
synchronous speed |
|||||||||
rotation 1500 rpm |
Electric motor type VAO-32-6 VAO-41-6 BAO-42-6 VAO-51-6 VAO-52-6
gatela
Power, ket, at 2.2 3.0 4.0 5.5 7.5
synchronous speed
rotation 1000 rpm
Motor type BAO-62-8 BAO-71-8 VAO-72-8 VAO-81-8 BAO-82-8
gatela
Power, cat. at 10.0 13.0 17.0 22.0 30.0
synchronous speed
rotation 750 rpm
Note. Electric motors insulation class - B. Execution - РВ, В15, blown.
Electric motors of the BAO series are also used as drives and separate units of finishing woodworking equipment.
The main technical data of BAO series electric motors are shown below.
Table 26
Electric motors of the BAO series installed on the finishing woodworking equipment
Name of equipment |
trodvigatel power, |
rotational speed, |
Number of installed electric motors, pcs. |
Motor installation location |
|
PZShch machine for |
BAO-12-6 | 0,6 |
vibration mechanism |
||
pore filling |
|||||
BAO-22-6 | 1,1 |
Roll drive |
|||
VAO-11-6 | 0,4 | ||||
ShPSH machine for |
BAO-42-8 | ||||
priming under |
|||||
opaque finish |
|||||
Laconic ma- |
BAO-22-2 | 2,2 |
» conveyor |
||
BAO-22-2 | 0,8 | - | |||
single drum |
VAO-51-4 | 7,5 |
» drum |
||
polishing |
|||||
GIB machine |
Examples of the use of electric motors on finishing woodworking equipment are given in Table. 26.
On fig. 33 shows a kinematic diagram of a single-drum polishing machine P1B. On this machine, a VAO-51-4 electric motor with a power of 7.5 kW and a rotation speed of 1500 rpm is installed as a drive.
Electric motors of the MD and MDU series with a squirrel-cage rotor are used to drive woodworking machines.
They are powered from the mains with a current frequency of 50 and 100 Hz. Execution closed, blown. Form of execution M-101.
Technical characteristics of electric motors of the MD and MDU series
md-o | md-z |
MDMU-1 MDMU-2 |
|||||
Power, ket |
|||||||
Rotation speed. |
|||||||
Mains voltage, V |
|||||||
Frequency Hz |
|||||||
Power, ket |
|||||||
Rotational speed. |
|||||||
Mains voltage, V |
|||||||
Frequency, ec |
On fig. 34 shows a four-sided planer S16-5P with an installed electric motor of the MD series.