A summer cottage is an area where you can give yourself the freedom to conduct numerous experiments and dream to your heart’s content. This manifests itself not only in interior design, but mainly in the design of a garden or vegetable garden. Inquisitive and inventive owners have long ceased to be guided by expensive and standard methods for arranging their plots, since there are a lot of alternative solutions in fact for all areas of activity.

There are several types of vertical beds that allow you to optimize the use of free space. Non-standard designs are a great opportunity to create interesting design garden, vegetable garden, summer cottage.

This type of beds is in most cases used for growing ornamental plants or herbs.

Materials for production:

Length drainpipes regulated in accordance with the wishes of the owner of the site. However, you should not make bulky beds, as they can complicate movement around the area.

Creating a bed

Stage 1. Create a container. To do this, take a drainpipe, cut it in half lengthwise and put special plugs on both sides.

Stage 2. We take the prepared metal holders and put them on the resulting frames for the beds.

Stage 3. We make holes in the pipe. They are made in those places where metal fasteners will be located.

Stage 4. We pass a cable or strong rope through the holes made.

Stage 5. Fix the cable/rope using fasteners.

Stage 6. Fill the resulting beds with expanded clay and soil.

Stage 7. Plant the plants in the beds.

Stage 8. We hang the pipes to the selected location. Sometimes a special wooden crossbar is installed for this purpose, or rather a structure in the shape of the letter “P”.

Step 9: Alternatively, a special design can be made for the pipes.

Important! A bed made of drainpipes is not resistant to strong gusty winds, so you should choose a place for it that is not blown from four directions by winds. Otherwise, the frame will quickly collapse, nullifying all your efforts.

A garden bed made from plastic bag, is another modification of vertical beds. It is extremely compact, functional and interesting in appearance. You can make such a bed in a couple of hours.

Materials for production:

• durable polyethylene film;
• sewing machine;
• priming;
• seedling.

In order for the bed to be strong, it is recommended special attention pay attention to thickness polyethylene film, which is in in this case will act as the “frame” of the structure. Minimum thickness films - 0.2 millimeters.

The process of creating a polyethylene bed

Step 1. We cut out 2 rectangular pieces of film, the size of which corresponds to the size of the bed being created. An allowance of one and a half to two centimeters should be left on each side. The recommended diameter of the bed is twenty centimeters.

Step 2. Sew the rectangles together, leaving only the top part bag.

Step 3. Sew to future garden bed a handle whose strength will allow it to withstand the weight of a bag filled with soil. It should also be taken into account that when watering the weight will increase.

Step 4. Fill the bag with fertilized soil.

Step 5. We make horizontal cuts on the bag in increments of twenty centimeters. They are necessary for planting seedlings in the garden bed.

Step 6. Plant seedlings.

Step 7. Regularly water the soil and add the necessary fertilizers.

With these simple steps you can get a cheap and useful garden bed.

An integral element of every summer cottage is a compost heap. This is the place where all sorts of biochemical reactions take place to create fertilizers.

To create fertilizers that will satisfy all the requirements placed on them, several key steps should be carefully considered: creating the container and directly correct production the compost itself. Let's talk about each of them in more detail.

Stage 1. Take eight support posts of the same length.

Stage 2. Treat the bottom of the wooden posts with motor oil or tar.

Stage 3. We dig the posts into the ground so that they are reliable and stable. If compost bin will be located next to the fence, then 4 posts (that is, one side) can be attached to the fence. This will avoid having to dig 4 holes.

Stage 4. Between each two adjacent posts we nail the crossbars so that we end up with three independent sections. Be sure to leave gaps that will serve as ventilation holes.

Stage 5. In two sections, we nail the boards horizontally to half the height of the pillars. In these places it is planned to create two small doors.

Stage 6. The remaining section will big door, so only one board should be nailed. It should be located at the very bottom in a horizontal position, that is, like a regular crossbar.

Stage 7. Install the covers. To do this, you can use one large solid board.

Stage 8. Install the pre-prepared doors.

Stage 9. We provide the doors with handles and latches.

Stage 10. We process the wood using special impregnations.

Stage 11. Paint the box in any color that suits your preferences.

Many gardeners mistakenly believe that any components can be dumped into a compost heap. In reality, to create the right biofertilizer, the “ingredients” must be carefully selected.

Among the required components compost heap the following components:

• peat;
• ash;
• needles;
• tree branches;
• leaves;
• hay or grass;
• wood ash;
• plant roots;
• raw vegetables and fruits, etc.

All elements are randomly mixed in a heap. To speed up chemical reactions It is recommended to cover the pile with a tarpaulin (this is especially true if there is no box).

Trips to the dacha with the family require the presence of entertainment elements on the site that will delight children. The most common way to keep young summer residents occupied is a swing.

Building a swing yourself is not an easy task, but it is quite doable. Of course, you can always take a stick, tie it with a rope and hang the structure on a tree, but this can hardly be called a full-fledged swing. Real craftsmen prefer to build comfortable structures with a comfortable place to sit.

Structural components:

• two logs;
• strong rope.

Indicators:

• log diameter – 85 mm;
• log length – 700 mm;
• distance between ropes – 500 mm.

Making a swing

Stage 1. We stretch the ropes between the logs.

Stage 2. Wrap ropes around each log.

Stage 3. Let the ropes out.

Stage 4. Tighten the ropes to 3 knots.

Stage 5. Attach the swing to the tree.

Important: this swing is designed for only one person.

Garden path from scrap materials

There are several types of garden paths that you can easily make with your own hands.

Step 1. Remove the sidewall from the tire using a knife or saw.

Step 2. Cut the tires.

Step 3. Line the space with corrugated stripes.

Step 4. Paint the path with paint.

Step 5. Sprinkle with stone chips.

This is an economical option for those who do not want to rack their brains and waste time on a full garden path. Tire paths are usually used for vegetable gardens, as they are easily laid in the ground.

Stage 1. Paint the corks in different colors.

Stage 2. Dig a small trench.

Stage 3. We drive in supports to strengthen the future path.

Stage 4. We construct the formwork using boards.

Stage 5. Install spacers along the edges of the trench.

Stage 6. Place crushed stone deep into the trench and compact it thoroughly.

Stage 7. Make a solution from sand, cement, glue and water.

Stage 8. Pour the solution into the trench.

Stage 9. Press in the plugs in random order. Smooth multi-colored stripes look interesting.

These are the simplest and quick ways make a garden path without purchasing expensive materials.

DIY tools

The expression “everything is useful on the farm” turns out to be more relevant when we're talking about about canisters. From this plastic container you can make large number irreplaceable tools that are actively used in the process of dacha work.

To make this tool we only need sharp knife and the container itself.

Stage 1. Cut off the bottom of the canister.

Stage 2. Mark a cut line for the scoop on the container so that the handle of the canister is the handle of the future tool.

Stage 3. Cut off excess material.

As a result of these simple steps, we get an excellent scoop with a comfortable handle.

Materials:

Manufacturing

Step 1. Wash the canister thoroughly so that no odor remains in it.

Stage 2. Cut the canister vertically into two parts.

Stage 3. We make a groove on the board using a woodworking machine.

Stage 4. Apply glue to the plywood and insert it into the bottom of the canister.

Stage 5. Paint the resulting shelf using a spray can.

Of course, this design will not withstand a lot of weight, but it is quite suitable for storing small parts.

Materials:

• 40 cans;
• scissors;
• rope;
• paper;
• marker.

Stage 1. Pierce the top of the canisters with a knife.

Stage 2. Make a stencil from paper.

Stage 3. Apply it to the canister and outline it with a marker.

Stage 4. Cut out large holes using scissors.

Stage 5. We stack the prepared canisters in several rows, tying each row by hooking a rope under the handles of the containers.

Stage 6. We tie all the rows around the perimeter for greater strength.

Stage 7. If you plan to lean the cabinet against the wall, then drill it to the surface.

Stage 8. Put in bottom row heavy objects - stones or bricks.

The result is a fairly spacious and functional rack that will help get rid of the problem of storing many small parts.

Be resourceful and bold in implementing your ideas. Good luck!

Video – DIY crafts for a summer cottage

Video - We do it ourselves for the dacha

Since you have decided to become a self-taught electrician, then probably after a short period of time you will want to make some useful electrical appliance for your home, car or cottage with your own hands. At the same time, homemade products can be useful not only in everyday life, but also made for sale, for example. Actually the build process simple devices at home is not difficult. You just need to be able to read diagrams and use the ham radio tool.

Regarding the first point, before starting production electronic homemade products with your own hands, you need to learn how to read electrical diagrams. In this case, ours will be a good helper.

Among the tools for novice electricians, you will need a soldering iron, a set of screwdrivers, pliers and a multimeter. To assemble some popular electrical appliances, you may even need welding machine, but this is a rare case. By the way, in this section of the site we even described the same welding machine.

Special attention should be paid to available materials, from which every novice electrician can make basic electronic homemade products with their own hands. Most often, old domestic parts are used in the manufacture of simple and useful electrical appliances: transformers, amplifiers, wires, etc. In most cases, novice radio amateurs and electricians just need to look for everything necessary funds in a garage or shed at the dacha.

When everything is ready - the tools have been collected, spare parts have been found and minimal knowledge has been obtained, you can proceed to assembling amateur electronic homemade products at home. This is where our small guide will help you. Each instruction provided includes not only detailed description each stage of creating electrical appliances, but is also accompanied by photo examples, diagrams, as well as video lessons that clearly show the entire manufacturing process. If you don’t understand some point, you can clarify it under the entry in the comments. Our specialists will try to advise you in a timely manner!

As they say, there is never too much space in the garage. Men who spend a lot of time in the garage will agree that in some cases every minute and every square centimeter of free space counts. This is why a garage handyman needs competent organization workspace. Various people help out and help here in every possible way. devices for storing building materials and work equipment, machine parts and other things necessary for work. To ensure that your electronic, garden and garage gadgets are always in their place, use the following devices:

• • stands;
  • shelves;
  • retractable panels;
  • racks;
  • organizers for tools.

For clarity, we also offer homemade products for the garage and home handyman do-it-yourself YouTube video will reveal all the nuances of organizing your workspace and suggest fresh ideas.

DIY crafts at home with your own hands

Man has been making homemade crafts since prehistoric times. Actually, all industrial processes are the improved once handicraft or home-made developments of folk craftsmen. Sometimes we don’t even think about the fact that we pay for things that we can do with our own hands. DIY homemade schemes are easy to find online, and the materials can be purchased at a hardware store or found at home.

For example, from a cardboard box and a piece of fabric You can make a convenient portable organizer for towels and other textiles.
The topic of storing all sorts of little things is inexhaustible, fortunately, as is the number of ideas. Good ideas for decor You can also draw from ordinary things - let them be buttons or empty tin cans.
Cool shelves are made from ordinary drawers. How do you like this idea?

As you managed to understand, if there is detailed instructions It’s not that difficult to make homemade products with your own hands at home. The video will help you understand all the nuances of this enjoyable activity. Useful tips, interesting ideas- Everyone should watch it.

DIY crafts for the garden and garden with your own hands

At the dacha there is usually some free time for creativity and arrangement of the surrounding space. That's why It's worth having a few on hand fresh ideas to implement them on your own summer cottage. Country homemade products at home, with your own hands, they can be ingeniously simple. From scrap materials you can make unexpected and extremely useful things for home use.

Ordinary pebbles turn into fairy-tale animals.From an old teapot it turns out great flower pot.

Used tires- this has already become a classic in the world of garden figures. Stylish lamps for country interiors – do it yourself from an ordinary jar and candles (don’t forget about safety precautions).
- a great idea for a small cottage.
Do-it-yourself homemade products for the garden and garden are often made by yourself, without unnecessary time and financial costs. Perhaps you had no idea how useful it is for household will turn out to be plastic bottles. Plastic bottles that have gone out of use can serve as the basis for an incredible decorative flower bed. Cool “blooming” pillars will significantly decorate your garden space.

Do-it-yourself garden furniture, successful homemade products: photos and drawings

In the previous sections, we told you about homemade products that will become indispensable for the household and home life. However, we should not forget about rest, before which, nevertheless, you will have to work a little. Cozy armchairs, various tables and benches, swings and hammocks- all this country and garden bliss can settle on your site. We invite you to familiarize yourself with photo instructions and manufacturing drawings. garden furniture. We have selected for you best options.

DIY homemade tractors at home: video

One more car in the household will never be superfluous. WITH using video lessons you will learn to design homemade tractors for processing the garden and summer cottage without extra effort.

Video: DIY crafts at home

New and simple crafts for arranging your home, garden and vegetable garden await you in this section. We will tell you completely free of charge, how to make useful and beautiful things with your own hands.

DIY fishing crafts: video for you

Every fisherman loves to brag about a good catch. And in order for your fishing plans to coincide with your capabilities, listen to the advice of professionals and experienced amateur fishermen.

Crafts made from old objects and things that can be given a second life can make your home much more comfortable. Some DIY homemade items for the household can significantly save your home budget, make work easier, or make surrounding interior more interesting. And even if difficulties arise in the process, overcoming them will be worth it.

Homemade crafts for the home workshop

In almost any home there is always some set of tools necessary for farming. But sometimes situations arise when working in your own workshop or garage requires some kind of device that cannot be purchased in a store or is very expensive. In this case, you can find a way out by making it yourself.

Forge from a balloon

This device for heating metal will become an indispensable assistant in a home workshop. The forge can be safely used for making original items using artistic forging. These will be truly unique forged items.

For the forge, it is best to use an empty 25 liter gas cylinder. Its ends are cut off with a grinder, and the door of the forge and its back part will be made from the cut parts. Interior The cylinder is covered with fire-resistant ceramic wool, which can withstand temperatures of more than 1200 0 C. On top it is coated with fireclay clay (lined), which can withstand temperatures up to 1500 0 C. After lining, fireclay slabs or fire-resistant bricks are laid on the bottom of the hearth.

A hole is drilled at the top and a small squeegee is inserted, allowing the nozzle of a gas-powered burner to be inserted, which can create a temperature in the forge of more than 1000 0 C - quite sufficient to heat the metal to a certain temperature suitable for forging.

Collapsible garage crane

When manufacturing such a lift, the cash costs will be much less than purchasing a factory model. To make it, you will only have to spend money on materials, half of which may be found in the garage.

Materials required to assemble the lift:

1. Two racks - profile pipe 100x100x2350.
2. Cross rod - steel pipe arbitrary length with a diameter of 100 mm.
3. Four supports for the rod - profile pipe 100x100x600.
4. The base and braces are a corner with 100 mm shelves.
5. Two metal rollers for the cable.
6. Four wheels for movement.

For the lifting mechanism, it is best to use a manual winch with a worm gear with a maximum load of up to 500 kg, which is attached to one of the racks of the crane beam.

The design does not take up much space in the workshop, is easy to move on hard surfaces and is quite convenient for removing the engine from the car.

Mobile tool rack

The main highlight of this rack is its small size, but at the same time you can place a large number of tools on it, and if necessary, quickly move it to any place or an adjacent room. It is very convenient to use such a rack in your workshop or when carrying out construction and repair work in large rooms, especially when you need to frequently carry tools.

The rack can be assembled on the basis of a collapsible plastic rack installed on a homemade platform with wheels (trolley). The platform is made precisely to the dimensions of the rack from metal corner with shelves 45x45 mm or a sheet of plywood with a thickness of at least 10 mm. Furniture metal wheels are used for movement.

It is additionally possible to manufacture and attach fastenings to the rack for building levels, extension cords and other tools that can be stored hanging.

To help the hostess

It is not always financially possible to buy, for example, some new furniture in furniture showroom or place an order for its production. But you can always get out of this situation by making the right thing with your own hands, while making it attractive and unique, using available means for this.

Kitchen apron made of corks

The kitchen apron is the surface of the wall located between the countertop and wall cabinets. Usually this part of the wall is lined tiles. But it is possible to use many other materials to cover it, for example, gluing wine corks to the wall.

Such exclusive decor looks pretty great.

Before sticking, each cork is cut lengthwise into two halves with a sharp stationery knife. It is advisable to paint the wall black, which will highlight the seams between the plugs.

Corks are glued to the wall using liquid nails V checkerboard pattern or with a certain pattern, since it is unlikely that it will be possible to lay them out perfectly evenly, and curved rows will visually look disgusting.

The plugs themselves are not afraid of moisture, but they quickly get dirty and are difficult to wash, so it is best to cover them with a glass screen made of tempered glass. True, you will have to spend a little money on it and order glass from a special workshop, where they will cut it to a given size and make holes for sockets and fasteners.

The glass is fixed to the wall with anchor dowels, which can be purchased at almost any hardware store.

Although the apron, decorated wine corks, may turn out to be an expensive pleasure, but the result achieved will be worth it.

The surface of the tabletop, as well as the wall, can be decorated with corks and covered with tempered glass.

Hanging folding table

Wall mounted folding table IR allows you to save some space in the apartment. When folded down, it can protrude from the wall at a distance of no more than 10 cm and does not bother anyone at all, but when unfolded it can replace a full-fledged table.

There are many options where you can use a wall-mounted folding table. Here are just a few of the most basic:

Shower for the cottage

There is probably nothing better than cooling off under running water on a hot summer day, especially if it was spent working in the garden. Naturally, only a shower will solve this problem and relieve the fatigue that has accumulated during the day.

You can install the shower yourself without involving outside help; the main thing is to choose a place for it and decide on the type of shower stall.

Among the summer showers, three types of cabins stand out:, which you can freely build on your own:

Installing a simple shower is done as follows:

1. A shower cabin frame is made, which can be assembled from metal, wooden beam or other available materials.
2. A metal or plastic container for water, which can be from 50 to 200 liters.
3. Metal container It is advisable to paint it black for better heating of the water. Additionally, several heating electric heating elements can be installed in the container, then you can take a shower even in cloudy weather.

The booth can be sheathed with boards, plywood, slate, or simply covered with tarpaulin or cellophane film with folding curtains.

For construction on your own

The topic of construction or renovation probably worries everyone. And, naturally, everyone who is involved in it wants to finish it quickly with minimal financial costs. Therefore, if you want to save money, you can make some materials for construction on our own. For example, these could be SIP wall panels or like this useful tool, like a vibrating plate, the need for which often arises for many owners of a personal plot.

Homemade SIP panels

To make them, you need to prepare a flat, hard platform. Laying a 10-12 mm thick OSB sheet on it rubber spatula with teeth, apply glue to it.

Then lay sheets of grade 25-30 foam plastic on the glue. After this, an adhesive mass is applied on top of the laid foam plastic, as well as on the bottom OSB board, and a second sheet of OSB is laid on top.

If several slabs are being made at the same time, stacked, the work should be done quickly until the glue hardens. Typically, no more than 4-5 panels can be prepared in this way at a time.

After preparing the formed slabs, you need to create pressure using a press. Since at home, naturally, hydraulic press no, it can be replaced with a thick plywood sheet, laid on prepared SIP boards over the entire plane and loaded for 2-3 hours, for example, with several bags of cement, sand or other cargo. You can even use a passenger car, having stopped at plywood sheet along a pre-made overpass.

After the glue has completely dried, the homemade panels are ready; they can be placed in a separate stack and you can begin preparing new panels. The manufactured panels should lie unloaded for another day, after which they can be used for their intended purpose.

Making a vibrating plate

To make homemade vibrating plate, you will need to prepare:

1. An electric motor with an IV-98E eccentric, which is the main part of the vibrating plate.
2. Steel sheet, at least 8 mm thick, size 450x800 mm. It can be ordered at any metal warehouse.
3. Two pieces of channel no more than 400 mm long.
4. inch pipe for the handle and two rubber bushings for its fastening.
5. The tools you will need are a welding machine, a grinder and a set of wrenches.

On the narrow sides of the slab, stepping back 80-100 mm from the edges, make an incision with a grinder to a depth of about 5 mm. After this, bend the edges towards the cut at an angle of approximately 25 0 and weld them by welding. The bends are needed so that the vibrating plate does not sink into the material it compacts and moves freely along its surface.

Then, across the slab at a certain distance calculated for mounting the electric motor, two channels are welded with the shelves down. Through in advance drilled holes in the channel, using M10 bolts, an electric vibrator is attached to them.

The handle, made of pipe, is attached to the vibrator through soft rubber bushings, which can be purchased at an auto parts store or hardware store in the hardware department.

Thus, you can make a lot of useful household things with your own hands, spending on it only a fraction of the money that you would have to pay when purchasing finished product. You just need to put in some effort and have certain skills.

Nothing brings joy to the house more than something made with your own hands. And it's true various homemade products for the home not only fill life bright colors, but also give the interior uniqueness and some zest. And it’s certainly impossible to forget about such a thing (even if it’s a small trinket). Moreover, it is not so important that these are homemade products made from wood for the home, from paper or plasticine. There are millions of options and methods for making various gizmos, and today we will look at several of them. So how to do it interesting homemade products for home?

Shelf made of tin cans

It would seem that such a trifle is a coffee can. However, even from it you can make a beautiful, comfortable and useful shelf for storing household items. Often, various souvenirs and memorable photographs are stored in such containers. There is little practical benefit from this homemade product, but such jars look very harmonious.

Details about the procedure for making this craft

1. First, holes are made in the jars using a drill or a special knife-ripper (in the top and bottom - 3 points, and in the walls of all the rest - 2 points).

2. Next, the jars are fastened together. Small nuts and screws are used as fastening elements. By the way, to get the desired (beautiful) result, you will need to have at least 5-6 of these jars.

3. Afterwards, a hole is punched in the containers for screws. 1-2 holes are made in the bottom of the jars located in the upper part of the structure to attach the shelf to the wall. The finished homemade product is screwed on with a screwdriver or screwdriver. To do this, dowels are first driven into the wall.

That's it, now homemade products for the home are being introduced. Rest assured - various small items will definitely not get lost in such jars. Thus, you kill two birds with one stone - decorate the interior and get rid of clutter in the house.

Homemade crafts for home - how to make a clock on a CD/DVD?

The clock on the CD is also very interesting and original version interior decoration.

As you can see, the design of this device is very original, and therefore it will look organically against the background of any interior (perhaps it will become its highlight). Such “smart” homemade products can be made for the home in a matter of minutes. We will tell you in more detail about all the stages below.

So, how to do it yourself homemade watch? First, you will need to prepare the appropriate materials - a CD/DVD (you can choose the design of its front part at your discretion) and a cover-case for it (the distance between the walls should be at least 0.05 centimeters). It is very important that the last part does not have any chips or scratches. To make the work easier, you can purchase a ready-made watch and then simply replace the standard dial.

It must be a pointer, otherwise you won’t be able to make a homemade product. You should also do the numbers. There should be a total of twelve of them. These can be cardboard, paper or plastic circles. Their thickness should not exceed two millimeters. Rhinestones can be used as decorations. You also need to prepare about 30-40 centimeters of wire, a piece of leather or fabric and “Moment” type superglue. The core of this entire design will be the CD. We will redo it first.

First you need to mark the disk into twelve equal parts and glue the numbers to the marked points. In this case, the sectors should not go beyond O.D. devices. How do you make homemade products for your home? After the sectors, we proceed to the clock itself - remove the arrows and place them exactly in the center of our disk. By the way, before attaching them, you can stick some kind of interesting photo, which will make the watch design even more original.

To increase the size of the arrows, use thin metal strips. To achieve the desired result, it is enough to apply glue to them and carefully position the part evenly over the entire surface of the guiding elements. The arrow mechanism itself is attached to the reverse side of the disc.

What to do next?

So, the base of the watch is almost ready. The next step is to make holes in the device along the contour of the arrow mechanism. The field of this disc is installed in a case. The mechanism itself is brought out through the hole and closed tightly. Now, using wire, a stop is made, which is glued to the back cover. To make it more durable, glue a piece of fabric or leather on top of it. This will make the stop not only strong, but also beautiful, since the excess part of the wire will no longer gape on the watch as before. That's it, the homemade watch from a CD has been successfully made. All that remains is to insert the AA battery and set the time. By the way, you can also make a battery yourself.

How to make a source of energy from a lemon?

As we know, this fruit contains a lot of acid, accordingly, when correct actions A lemon can be turned into a real mini-battery.

Of course, the charge from such a “battery” will not be enough to work household appliances, however, for operation or charging mobile phone this current is quite enough.

Making homemade crafts for the home - preparing tools to turn lemon into a source of constant energy

During the work you will need tools such as a knife, soldering iron, drill, iron pin, as well as several pieces copper wire in isolation. Among other items, it should be noted the need for one glass or shot glass, a pair wooden sticks and the same number of push pins. And, of course, our main source of energy will be lemon. You can also use orange, but it contains much less acid, so the charge from it will be minimal.

Instructions

First, cut the lemon in half. This is necessary so that it gives more acid necessary for the lemon to be fixed in the glass so that it does not roll around the table. Next, copper and iron pins are inserted into its flesh along the entire perimeter at a distance of 0.5-1 centimeter. Our “minus” will be iron, and our “plus” will be copper.

Pieces of wire are attached to all the pins using a soldering iron. They will serve as a connector for the power supply. All elements are connected in series.

On final stage sticks are inserted into the battery compartment. It is important to observe polarity here. The contacts are pressed against the contact group. The container remains open throughout the entire charging process of the device.

So, we found out how to make useful homemade products with your own hands. Good luck in your endeavors!