Every girl needs to take care of herself. Sometimes it is very difficult to find this or that cosmetics, a mirror or a hairbrush. A dressing table will help you cope with this small problem. It can be made in the form of a dressing table with or without a mirror, and even with backlight. Such furniture can be made not only multifunctional, but also beautiful, which will significantly transform the interior of your apartment. Most often, such a product is installed in the bedroom, corridor or bathroom. This is a very convenient thing due to the fact that all the necessary items will be at your fingertips. Making a dressing table with your own hands is not easy, but it is quite possible if you start by building a simpler design. Today we will tell you how to do it.

DIY dressing table - preparation and materials

Before starting the manufacture of the product, you need to complete a certain action plan: carry out preparatory work and purchase the necessary material and other components. Let's look at each of these steps in order.

Preparatory work

Without preparatory work, you are unlikely to be able to build a beautiful, stable and durable structure. Below is an instruction that is suitable for absolutely any dressing table. So, let's take a look at it:

• We carefully consider the location of the structure and its correspondence with the overall picture of the interior.

Important! It is desirable that the table be made in soothing colors that the immediate hostess would like.

• We create a drawing of a dressing table with dimensions. We indicate on the sketch the desired length, width, depth, height, size and number of shelves. In the case of furniture with a built-in mirror, we write on paper and its parameters. If the table will have additional lighting, then we mark the locations of future lamps with a description of the method of their attachment. You can make similar drawings yourself or take ready-made diagrams from the Internet.

Important! We pay special attention to lockers and shelves, because their size and quantity directly depend on the dimensions of the product and on your wishes. Here it is important to take into account all the nuances: where you put cosmetics, first aid kit, books and other necessary things. If you have a lot of things, then add open side shelves to the design.

• Choose a mirror, if available. According to its parameters, we will select the mounts that will hold it.

Important! It is advisable to stop at a mirror with thick walls so that you do not worry about its integrity and safety.

• The material that you choose for the manufacture of the frame of the dressing table must be well sanded, the edges processed with high quality, and then closed with plastic corners.

Materials and tools

Structurally, it is not so difficult to make a simple dressing table. For example, you can make a small chest of drawers, and attach a mirror parallel to the wall. The only thing needed is the accessory boxes.

The list of materials to choose from for the manufacture of the frame, side walls, bottom and shelves of this product:

• Sheets of chipboard or chipboard 16 mm thick. These are the most common materials in furniture production. They have a number of advantages: they are inexpensive, light in weight and easy to process at home.
• MDF sheets. It is considered expensive due to its high quality, efficiency and durability.
• Wood. For such material, only those craftsmen who have experience in carpentry are taken. Wood is easy to process, but a milling machine is needed to cut out the details.
• Plywood or fiberboard. Used for the manufacture of the bottom of drawers and the back wall of furniture.

Required fasteners:

• Confirmates 5x70 mm in size.
• Self-tapping screws 4x16 mm and 4x25 mm.
• Metal furniture corners.
• Roller guides for free movement of drawers.
• Hardware for doors and drawers.
• Adhesive plastic edge.

Instruments:

• Drill or screwdriver with a set of nozzles.
• Jigsaw for cutting sheets of chipboard, chipboard, MDF.
• Drills with a diameter of 5 and 8 mm.
• Building corner.
• Roulette.
• Screwdriver for tightening confirmations.
• Sandpaper of varying degrees of grit.

Additional accessories and details:

• Mirror of the correct size.
• Plastic inserts for sashes (for glass - glass).
• LED Strip Light.
• Decorative panels.

Table for cosmetics with your own hands without a mirror

This is the easiest option and is ideal for a beginner. So, your attention is presented with a detailed master class on the manufacture of such a small chest of drawers for accessories:

• We impose on chipboard sheets ready-made sketches of the details of our future product.

Important! You can easily cut sheets at almost any hardware store for a small fee. So you will be sure of the quality of the work of specialists. If, nevertheless, you do not have such an opportunity, then cut the material into parts using an electric jigsaw.

• We clean the ends of each part with sandpaper: first coarse grit, and then fine.

Important! Do not be upset when you see chips on the edge of the sheets, because at the end of all work, any flaws will be hidden by the end tape.

• We prime the ends twice to give greater strength to the edge. Glue "Moment" is well suited for this. We put a soft edging on the tabletop, and then paste over the ends with a special melamine edge, which we apply to the edge and iron.
• We assemble the frame of our table: table top, side walls, legs, back wall. We drill holes for attaching all the elements to each other. We fix the details with confirmations, check the corners using the building level. After we are convinced of the correct assembly of the structure, we tighten the confirmation with a suitable key.
• We duplicate the side walls and support legs of our product with metal corners.
• Now we collect the boxes. We drill all the side parts into the plane, and into the end - the front and back parts. We assemble the table for confirmations, check the build quality, and then tighten the fasteners with a screwdriver. We fix the plywood bottom with small nails.
• We fix one roller guide to the side screws, and its second counterpart to the walls of the cabinet. We put the box in the installed guides.
• Since our table has doors, we need a Forstner drill with a diameter of 35 mm to install the hinges. We make holes for the hinges with a depth of 12.5 mm. We fix the hinges with strong screws. We fix the hinges to the sash with ordinary self-tapping screws.
• We drill holes for handles on the front of the drawers and doors of the product, and then tightly fix the fittings.

Dressing table assembly with mirror

This method is a little more complicated than the previous chest of drawers without a mirror, but it is also quite possible to make it. Let's look at two main ways to make it.

First method:

1. We cut out the back wall not from a fiberboard sheet, but from a chipboard with a prepared base for a future mirror. It can be used as a functional fixture or be a decorative frame of various shapes.
2. We fix the purchased mirror in the frame with the help of plastic holders. For these purposes, you can use "liquid nails" or double-sided tape.

Second method:

1. From plywood sheets, cut out the desired shape under the mirror. It can be rectangular, square, round or curly.
2. We fix the mirror with “liquid nails” to the cut canvas.
3. We fasten the still separate part to the back wall of the base of the previously made dressing table. We carry out this work with self-tapping screws, screwing them as much as possible to the upper part with a mirror.

DIY dressing table with mirror and lighting

In a chest of drawers for accessories, recessed lighting can serve one of two functions - practical or decorative. For the latter option, you will need an LED strip, preferably colored. It is placed along the edge of the table, along the supporting legs or at the bottom of the furniture.

Important! It is very simple to install such lighting: the places of its possible cutting and connection are marked on the tape. Do not forget that the tape is powered by the mains, the voltage of which must be at least 12 watts. This will create a slightly subdued light on the coffee table.

Technique for making cabinets with backlight:

1. We assemble the main frame from wooden boards 20 mm thick and 90 mm wide according to the size of our mirror. We connect all the parts together with carpentry glue. We cut the ends at an angle of 45 degrees. We fix the structure in the corners with metal corners.
2. We drill holes in the frame that are needed to install bulb holders. We glue the outer frame of the thinnest rails. It is she who will hide the wires of our backlight.
3. We fix the furniture corners to the base, then lay the mirror on them. We connect the cartridges in parallel to each other.
4. We paint the product in the desired color. We are waiting for complete drying.
5. We bring out the power cord through one hole made.
6. Now we screw the bulbs into the cartridges and check the operation of the lighting.

Now you know how to make a dressing table with your own hands. According to the above instructions, this is not so difficult to do, especially since you can start with a simpler model, and then improve it.

Every woman dreams of a small place where she can lay out all her accessories and cosmetics. It is not always possible to buy a ready-made dressing table. This is due to its high cost and not always suitable sizes. As for the individual order, it can be even more expensive. Therefore, it is more expedient to make a dressing table with your own hands. It's simple, the main thing is to devote enough time and think over its design. The design of the table should include a work surface, shelves, drawers and a mirror.

Dressing table dimensions.

Additionally, such a dressing table can be equipped with lamps. They can also be used as night lights if equipped with a dimming system.

In order to make a dressing table, you must use laminated chipboard. The color is chosen at your discretion. If desired, you can combine several colors. If possible, you can order parts, for this, provide the dimensions to the appropriate workshops, in which you will be cut out the necessary elements of the table. If this is not possible, you can deal with it yourself, at home. To do this, you need to acquire a special tool.

Tools you will need to make a table with your own hands:

Dressing table assembly diagram.

• screwdriver, you can use a drill;
• electric jigsaw;
• roulette;
• building corner, 30 cm long will be enough;
• drills, required dimensions - 8 and 5 mm in diameter;
• a screwdriver, it is very important to purchase a hexagonal model;
• iron;
• a pencil for basting, a hammer, you will also need sandpaper.

If the details of the table have been ordered, you can immediately start assembling. If this process is carried out independently, it is necessary to start with measurements and drawing contours on a chipboard sheet. It is very important to measure correctly and only then cut off. In order to make the dressing table perfect, it is better to take measurements several times.

For a dressing table, it will be enough to use a sheet thickness of 16 mm.

After all the details are cut out with a jigsaw, the ends must be cleaned with sandpaper. This should be done carefully so as not to damage the lamination.

Assembly accessories

The next step is assembly. Almost all cabinet furniture has the same fastener systems. They can be purchased at any hardware store in the hardware section. For a table with a shelf and drawers, you will need the following set of fittings:

General view of the dressing table.

• confirmat size 5x70 mm, can be purchased with a margin;
• self-tapping screws 4x16 mm in size;
• self-tapping screws 4x25 mm in size;
• for boxes it is necessary to purchase roller guides, the size and quantity depends on the size of the structure;
• handles for drawers;
• soft edging for ends;
• melamine edge on an adhesive basis, it is recommended to take with a margin;
• metal furniture corners;
• mirror glue, mechanical fasteners can be used;
• for handles it is necessary to pick up screws.

Features of the assembly process

If the design of the table involves curved lines, you should not rush during the sawing process. It is on how the parts are prepared that the appearance of the structure will depend.

1. Prepared parts must be processed from the front side. To do this, they need to be primed. This can be done using ordinary Moment glue. This technique will make the edges of the chipboard more durable.
2. After complete drying, you need to apply another layer of glue and put on the piping. Soft edging is used only on the top tabletop. To finish the ends that are not processed by edging, use a melamine edge.
3. In order to glue it, the ends also need to be cleaned. The melamine edge is glued with an ordinary iron. Having attached one end of the edge to the end, we smooth it with a well-heated iron (up to 3-4 power). The iron must be carried out from above several times until it is completely glued. Press well with a dry cloth. After cooling, cut off excess elements. It is very important to use a blunt object that will not damage the laminate. The edge is cleaned with fine sandpaper.
4. Finished parts can be assembled. In disassembled form, roller guides for boxes are installed. The assembly of the entire structure is carried out by confirmants. The base of the table is assembled first, then the department with drawers or cabinet. All departments are interconnected. During the assembly process, you should check with a building corner that the corners correspond to 90 degrees.
5. The final step is to install the mirror. Previously, it is fixed on the prepared chipboard part. A more reliable option for fixing are mechanical holders that are screwed into the base of the chipboard.
6. The whole structure with a mirror is attached under the table top. For additional strength, it is necessary to install guides that will hold the structure with a mirror. A properly installed mirror should not be movable.

For greater convenience in such a table, you can equip lamps with daylight. Making a dressing table with your own hands is quite realistic, the main thing is to follow the recommendations and be patient and attentive. And a table made with your own hands will delight your beloved woman.

Any woman needs a place where it will be convenient for her to put herself in order in the morning or get ready for bed. A makeup table with a mirror is a great solution to this problem. Harmoniously matched to the interior of the room in which it is located, it will bring comfort and become a favorite corner for restoring beauty or for spiritual relaxation.

Any woman needs a place where it will be convenient for her to put herself in order in the morning or get ready for bed.

Dressing table in a modern style has a good capacity, can be illuminated, with mirrors (from 1 to 3) or without them. By turning the flaps of the latter, it is very convenient to inspect makeup, jewelry or hair from all sides. A dressing table with a mirror is called a dressing table. He won the greatest popularity among the fair sex. A modern dressing table has irreplaceable elements: various drawers, shelves, caskets. They will fit the entire cosmetic and perfume assortment, so necessary for a woman.

In addition to its intended purpose, a piece of makeup furniture with large mirrors can visually expand the space of the room, and its original look will turn the room into a luxurious boudoir. Typically, a makeup table is placed in the bedroom, but it can often be placed in other places in the apartment, such as the hallway or bathroom. It all depends on the preferences of the hostess, on where it is most convenient for her to paint and take care of herself. It is better if it is a window seat, as the sunlight allows you to notice all the slightest nuances and create the most natural make-up. If the room is without windows, you will need to take care of additional lighting for the dressing table.

Probably, for any woman, having a place to store cosmetics is not as important as the process of creating her image. Therefore, the design of the dressing table is of no small importance. Nowadays, a large selection of products of different designs, colors and shapes is offered for sale. This allows you to satisfy the demand of the most demanding customers and choose a boudoir table for any style, be it modern or high-tech.

Classic-style options are perfectly combined with any interior space. Provence or vintage styles are suitable for small rooms. Particular attention can be paid to wrought iron dressing tables: they can be a great addition to any bedroom decor. A wrought iron piece of furniture looks like a light lacy construction and may include details inlaid with stones, which not only makes the piece itself original, but also decorates the room as a whole.

If the options on sale do not suit you in terms of size or price, it is quite possible to make a suitable dressing table with your own hands.

Gallery: makeup table with mirror (25 photos)

DIY make-up mirror with lighting (video)

Making your own makeup table

Special furniture for cosmetics is an optional element, but still necessary for every woman. Sometimes it is just a shelf under the mirror, but it is also a kind of mini-table for makeup. In the absence of the opportunity or desire to buy a finished product in a store, you need to assemble a dressing table with your own hands. The design of this piece of furniture is simple. This is the most common table, even optional with a mirror that can simply be mounted on the wall. Complicate the work only built-in drawers.

First you need to determine the location of the product, develop a project, taking into account the desired dimensions of the dressing table, and draw a diagram. Mark the number and dimensions of drawers and shelves, their attachment points. In this case, in the middle you need to leave enough free legroom. To make a stylish dressing table, you can show your imagination and add some original elements to the sketch. Then, according to the drawing, calculate the amount of necessary materials, fasteners and accessories that will need to be purchased at a specialized store.

The countertop can also be bought ready-made.

Assembly is carried out starting from the body: tabletop, side racks or legs and back wall. Then each box is collected separately. Roller guides are attached to the finished case and boxes are inserted. All side cuts must be processed with a piping and a special edge. After that, you can add various accessories and elements to your table: a mirror, LED strip, decorative inserts for doors, etc. Now you can install the finished furniture in the chosen place.

In order to get an excellent result, making a dressing table with your own hands, careful execution and strict adherence to the project are necessary. Various elements, especially for a simple model, are not difficult to make, but accuracy and patience are required when aligning and finishing the edges. And then a self-made original product will decorate the interior of your favorite room for a long time.

Dressing table (video)

Attention, only TODAY!

Dressing table made of handmade wood

Modern techniques, equipment and materials make it possible to create a unique dressing table with your own hands. By following simple instructions, even people with no experience can make a beautiful piece of furniture at minimal cost in a few days. Making a table with his own hands, the master can make furniture of the required size and functionality, colors and shapes, using materials that are safe for health and choosing a mirror that is convenient in shape.

An elegant dressing table in the bedroom is a necessary and practical piece of furniture.

A table of complex design with drawers, mirrors, cabinets, countertops of unusual shapes, shelves and other elements is harder to make than a simple neat table with four legs (the mirror is attached to the wall).

Stylish dressing table with a separate mirror on the wall

An example of a drawing of a dressing table with dimensions

The dressing table on legs is complemented with drawers from the bottom of the tabletop, a bookcase on the side, built-in and side drawers, folding mirrors, etc. Each additional element complicates the design and its manufacture.

White dressing table in modern style

Considering how to make a dressing table with your own hands, one of the prerequisites for obtaining a beautiful and functional product should be singled out separately - the creation of competent project documentation (a drawing indicating the exact dimensions up to millimeters, a list of necessary materials, accessories). Changes to the model should be made at the design stage.

DIY dressing table model

The scheme of creating a dressing table without a mirror in the bedroom with your own hands

The ease of execution of the dressing table depends on the materials that will be used in production. For example, natural wood products require a certain level of skill, and even a beginner can handle MDF, plywood or chipboard (many suppliers offer cutting material to size).

To make a dressing table of almost any model, you will need the following tools and materials.

Clamps are used to connect parts at right angles.

Elements for decorating the dressing table are selected individually depending on the style of the piece of furniture. You can make any decorating elements (patterns of hemp rope, beads, shells, beads, etc.)

Manufacturing process: step by step instructions

Figured shape of the table top of the dressing table with dimensions

A do-it-yourself dressing table can be made with and without a mirror (the mirror is bought and decorated separately, fixed directly to the wall). Beginning craftsmen are advised to make a model without a mirror. Making a dressing table with your own hands must be done in the following order:

We pre-drill the parts fastened with confirmations

• frame assembly (tabletop, back wall, support posts / table legs are fixed with confirmations);

We tighten the sidewalls of the pedestal with confirmations with slats and a bottom

We assemble the module “panel with a mirror + shelf with supports”, fasten it from below, through the tabletop

If the project implies the presence of a door, it is required to drill a hole to fix the furniture canopy (fastened with screws). To achieve greater reliability and stability of the product, the craftsmen recommend additionally gluing each joint with a suitable adhesive, for example, PVA. To do this, before tightening the fasteners, the ends are smeared with glue.

Scheme of a dressing table with two cabinets for making your own hands

dressing table decoration

Beautiful handmade decoupage dressing table

More than half of the uniqueness of each handmade product consists of decor. Modern materials and decorative elements allow you to create a dressing table in any style.

A small dressing table perfectly complements the interior of the bedroom

The surface can be made plain or multi-colored, stained or painted with paint, varnished or left matte. For example, when painting with ordinary acrylic paint, the surfaces take on the appearance of valuable wood species, and the use of stain shows a woody structure.

Unusual dressing table with decor and lighting

The dressing table can be decorated with any decorating elements (beads, paintings, beads, painting, etc.). You just need to choose the style, the appropriate decor details and a new unique piece of furniture, made by yourself, will decorate the women's boudoir.

Low light dressing table for girls

Video: Dressing table with an oval mirror

A dressing table is an indispensable attribute of a women's bedroom. All kinds of perfumes and items are stored in its drawers and shelves, without which a woman cannot imagine a full-fledged existence, but the main part of this table is a mirror.

A dressing table is a small cabinet with a mirror, designed to store cosmetics and other items.

Try to make a dressing table with a mirror with your own hands. Today you can buy almost everything for its manufacture, and if your plan succeeds, then you will give your life partner not just an original piece of furniture, but real happiness.

Materials for manufacturing

Perhaps this is the first time you take up the construction of a dressing table with a mirror and do not quite understand how all sorts of dressing tables are made. The simple and compact design will fit even in the smallest room.

For manufacturing you will need:

• chipboard plates with a thickness of at least 16 mm;
• plywood or radio cardboard;
• fittings (handles, furniture canopies, drawer guides);
• melamine or PVC tape;
• self-tapping screws;
• confirmations;
• plastic plugs;
• mirror;
• glue or 2-sided tape.

By the way, the table top of the dressing table can be made of thicker chipboard. You can also assemble a thicker slab by joining 2 16mm panels together. The configuration of the wall to which the mirror will be attached depends on its shape. You can cut a mirror from an old product you have, order it in a specialized workshop, or buy it ready-made in a store.

The list of tools is short. Prepare:

• pencil;
• tape measure or long ruler;
• awl;
• square;
• jigsaw or circular saw;
• drill driver;
• key for tightening confirmations.

Back to index

To cut chipboard, use an electric jigsaw with a special saw.

Mark the plates according to the dimensions indicated in the drawing and cut the chipboard into the required fragments. Care must be taken when cutting laminated chipboard, as chips can form on the edges. Use for sawing a special blade designed for working with chipboard, or an appropriate jigsaw blade. There is an opinion that it will not be possible to avoid chips when cutting plates at home, but this is not so. They need to be cut with a tool with well-sharpened working surfaces, set to maximum speed, without stopping cutting in the middle of the material being processed. You can seal the cutting line with transparent tape before sawing.

After sawing, the ends of the chipboard are pasted over with melamine tape. It adheres tightly to the edges after ironing with a hot iron. Excess tape is cut off with a clerical knife.

Possible chips will be hidden by a U-shaped facing tape, which is planted on the edges with glue.

The assembly of a double tabletop is carried out with the help of glue and self-tapping screws screwed into it from below (for self-tapping screws and confirmations, it is necessary to pre-drill holes). After joining, the ends of the tabletop are closed with tape.

Back to index

Dressing table assembly and mirror installation

Mark the mounting locations for the fasteners. Before drilling holes, mark the laminated surface of the particle boards with an awl. After drilling, countersink the holes for the confirmation caps. For fasteners, 5 mm holes are prepared, and countersinking is carried out with a drill with a section of 8 mm. Cut out the back partition from fiberboard or plywood. Assemble the table in outline. Check how well the structure is assembled. Using a tape measure, once again determine the dimensions of future drawers, doors and shelves.

Make drawers, a door and a bedside table shelf. Their front walls can be covered with MDF facade panels. Guide skids are attached to the drawers and sidewalls of the table with self-tapping screws. In the door, it is necessary to drill 2 blind holes for furniture hinges. The diameter of each hole is 3.5 cm. An appropriate crown is inserted into the drill chuck, and a limiter is installed so that the drilling depth does not exceed 12.5 mm. The hinges are fastened with short self-tapping screws.