Mirror table with infinity effect do it yourself. Unique do-it-yourself infinity table

Reading time ≈ 6 minutes

You can make the interior unique and original with the help of unusual pieces of furniture, for example, a table with an infinity effect. Making such a little thing yourself is not difficult if you follow a simple instruction. The finished product will organically complement any modern interior and will cause genuine delight among households and guests!

Table with LED lighting.

Table Feature

Externally, the table is not much different from any ordinary coffee table. However, as soon as the backlight is turned on, the tabletop of the product begins to flicker and glow with hundreds of lights, creating the illusion of infinity. You always want to admire such magic, and there are no indifferent to the unusual table, neither among adults nor among children.

A backlit coffee table looks especially impressive when the lights are off in the evening.

The effect of infinity is achieved due to the special design of the tabletop - its box consists of two mirrors, and a diode tape is installed on the sides. At the same time, a translucent mirror is selected for the top cover so that the light pattern is more visible and pronounced.

A more detailed design of the product is shown in the photo below:

Design.

You can turn on the product using remote control or a special switch on the box.

To illuminate the countertop, you can choose diodes of any desired shade or combine several colors. But experts especially recommend taking a closer look at the red diodes - due to the small dispersion, the endless tunnel acquires more depth.

Such unusual item furniture is perfect for home use as well as for placement in the office. It can be made in absolutely any size and from any material.

Table with lilac backlight.

Materials and tools

You can make an exclusive piece of furniture with your own hands. To do this, prepare necessary materials, tools and follow the step-by-step instructions.

To make a table you will need:

boards for the frame (made of wood or chipboard);
mirror according to the parameters of the countertop;
translucent mirror. Dimensions should be 10 cm larger than the lower mirror;
self-adhesive diode tape, length depending on the size of the table, but not less than 1.5 m;
materials for connecting the tape: controller, programmer, wires, power supply with USB;
consumables: sandpaper, glue, screws, metal corners.

Instead of a translucent mirror for the top cover, you can take ordinary glass and paste over it yourself with a tint film.

Idea: to cut down on work, in any furniture store you can purchase the simplest table in design and use it as a finished base.

Why choose LEDs:

They give a rich, beautiful, deep shade.
Longer service life without burnout (at the same time, the number of on / off does not affect the service life).
No heating.
High efficiency.
A variety of colors.
Acceptable cost.
Light bulb safety.

Assembly

Before assembly, it is necessary to develop a drawing of the table, calculate the distance between the mirrors, the number of diodes, and consider the location of the electrical elements.

To get an idea of how the flickering lights will look in the finished product, simply place any light source between the bottom and top of the table and look at the result.

Regarding the distance between the mirrors, everything is individual and depends on your wishes. But often the average value is chosen - 8 cm. To calculate the depth of infinity, the distance between the covers must be multiplied by 16. Also keep in mind that the depth of the tunnel will depend on the light transmission of the top cover. After all the calculations, you can proceed directly to the assembly.

Step-by-step instructions for making a table with an infinity effect with your own hands - making a base:

From bars with a section of 5 * 5 cm and metal corners you need to make a frame for the future table. For fastening, use screws and a screwdriver.
Using sandpaper, carefully process all edges and corners to give them smoothness and eliminate burrs.
Drill holes for electrical elements with a drill, follow the drawing. The holes need to be sanded tighter.
For additional fastening of the structure, you can process the joints with glue. After that, the frame must dry for at least 24 hours.

Frame assembly.

Tabletop assembly step by step:

To plywood sheet right size attach boards (section 5 * 1 cm) along the outer perimeter, and at a distance of 5-6 cm along the inner perimeter. You should get a kind of gutter between the boards - this is where the wiring and electrical elements(see photo above).
Place a mirror on the bottom of the countertop with the reflective side facing up.
To the inside of the smaller frame, you need to attach the LED strip with double-sided tape.
Wiring is laid in the space between the frames.
Attach the top mirror cover to the table top.
The whole structure is fastened with screws.

Tabletop assembly.

At the end of all the work, you should get something like this table with a mirror surface:

Finished product with backlight off.

However, it should be understood that you can make a table with an infinity effect from any material that you know how to handle - for example, plexiglass, plastic, metal.

When working with mirrors and glass protective film remove only at the end of all processes.
Be sure to thoroughly study the diode connection diagram in order to avoid a short circuit, or even worse, a fire.
Use a moisture-resistant adhesive for fastening.
In the event of a breakdown of electronic parts, it will be convenient to have free access to them, therefore it is better to place the controller and programmer not inside the table, but outside - placing it in a neat box and fixing it under the tabletop.

Reading time ≈ 6 minutes

Table with LED lighting.

Table Feature

A backlit coffee table looks especially impressive when the lights are off in the evening.

A more detailed design of the product is shown in the photo below:

Design.

You can turn on the product using the remote control or a special switch on the box.

Such an unusual piece of furniture is perfect for both home use and office placement. It can be made in absolutely any size and from any material.

Table with lilac backlight.

Materials and tools

You can make an exclusive piece of furniture with your own hands. To do this, prepare the necessary materials, tools and follow the step-by-step instructions.

To make a table you will need:

boards for the frame (made of wood or chipboard);
mirror according to the parameters of the countertop;
translucent mirror. Dimensions should be 10 cm larger than the lower mirror;
self-adhesive diode tape, length depending on the size of the table, but not less than 1.5 m;
materials for connecting the tape: controller, programmer, wires, power supply with USB;
consumables: sandpaper, glue, screws, metal corners.

Instead of a translucent mirror for the top cover, you can take ordinary glass and paste over it yourself with a tint film.

Idea: to cut down on work, you can buy the simplest table in any furniture store and use it as a finished base.

Why choose LEDs:

They give a rich, beautiful, deep shade.
Longer service life without burnout (at the same time, the number of on / off does not affect the service life).
No heating.
High efficiency.
A variety of colors.
Acceptable cost.
Light bulb safety.

Assembly

Before assembly, it is necessary to develop a drawing of the table, calculate the distance between the mirrors, the number of diodes, and consider the location of the electrical elements.

To get an idea of how the flickering lights will look in the finished product, simply place any light source between the bottom and top of the table and look at the result.

Step-by-step instructions for making a table with an infinity effect with your own hands - making a base:

From the bars with a section of 5 * 5 cm and metal corners, you need to make the frame of the future table. For fastening, use screws and a screwdriver.
Using sandpaper, carefully process all edges and corners to give them smoothness and eliminate burrs.
Drill holes for electrical elements with a drill, follow the drawing. The holes need to be sanded tighter.
For additional fastening of the structure, you can process the joints with glue. After that, the frame must dry for at least 24 hours.

Frame assembly.

Tabletop assembly step by step:

Attach boards (section 5 * 1 cm) to a sheet of plywood of the desired size along the outer perimeter, and at a distance of 5-6 cm along the inner perimeter. You should get a kind of gutter between the boards - this is where the wiring and electrical elements will be placed (see photo above).
Place a mirror on the bottom of the countertop with the reflective side facing up.
To the inside of the smaller frame, you need to attach the LED strip with double-sided tape.
Wiring is laid in the space between the frames.
Attach the top mirror cover to the table top.
The whole structure is fastened with screws.

Tabletop assembly.

At the end of all the work, you should get something like this table with a mirror surface:

Finished product with backlight off.

However, it should be understood that you can make a table with an infinity effect from any material that you know how to handle - for example, plexiglass, plastic, metal.

When working with mirrors and glass, remove the protective film only at the end of all processes.
Be sure to thoroughly study the diode connection diagram in order to avoid a short circuit, or even worse, a fire.
Use a moisture-resistant adhesive for fastening.
In the event of a breakdown of electronic parts, it will be convenient to have free access to them, therefore it is better to place the controller and programmer not inside the table, but outside - placing it in a neat box and fixing it under the tabletop.

Illuminated table - very interesting and eye-catching element decor rooms.

Thanks to the use of a translucent mirror and many sources light is created stunning Effect shining tunnel.

This unusual a piece of furniture is also called an infinity table, 3D table and a glowing table.

LED strips

Used in the manufacture of the table LED Strip Light, which creates the effect of infinity.
The most convenient are self-adhesive ribbons.

Operating principle

The LED strip consists of two diodes - single-chip, having one color spectrum, and three-crystal, consisting of three color spectra (green, blue, red).

radiation crystals blend to form a broad color spectrum gamma.

Specifications

LED type - The main difference between all LED strips from each other. The most common are SMD 3028 and SMD 5050 LEDs.
The abbreviation stands for "surface-mounted device", and the numbers indicate the dimensions of the LED lamps: 3.0 x 2.8 mm and 5.0 x 5.0 mm.
Density. The more LEDs per running meter, the brighter the glow from the tape.
Glow color LEDs can be anything. The most popular are white, yellow colors, cold and warm tones.
Moisture protection. IP 20 - open, IP 65 - moisture resistant, IP 68 - the highest degree of moisture protection.

Advantages

Large light return;
high strength and vibration resistance of tapes;
Long service life (about 100 thousand hours);
various tones and shades glow lamps;
inertia tapes is small, which allows you to use the most high brightness from the moment you turn it on;
Quantity cycles switching on / off does not affect the service life of LED strips in any way;
Environmental friendliness;
Security;
budgetary price;
Not prone to breakage due to low temperatures.

Note! High temperatures categorically contraindicated for LED strips.

How to make backlight computer desk with help led strip, look at video:

DIY 3D table

Consider making more complicated but the safest beautiful led table.

materials

In order to make a table, you will need the following materials:

Mirror(diameter 60 cm);
Mirror translucent self-adhesive film;
Styrofoam(for the body);
Glass or plexiglass (thickness 4 mm, 65 x 65 cm);
metal strip in a roll (for a window);
wires;
Instantaneous Super glue;
Bilateral scotch;
Power Supply 5/5.5V 200/300mA with USB output;
Self-adhesive tape LED(not less than 1.5 - 2 meters);
Arduino Uno;
programmer for Arduino (for projects);
USB to power the microcontroller.

Note! The mirror can be absolutely any shape: square, circle, oval, D-shaped bar, etc.

Instruments

Instruments, necessary to create an LED table:

router(a nozzle is required for the manufacture of round parts);
regular or
soldering iron(you definitely need solder for a soldering iron);
dremel;
scissors;
knife(for cutting metal and plexiglass);
pencil, pen, thin marker;
square(ruler).

Stages of work

Step 1. Cut out a piece of plexiglass circle according to the diameter of our mirror. The edges clean up, remove the string.

Note! When cutting a circle from Plexiglas, the milling machine must be driven quickly so that the edge does not melt.

Step 2 Gently glue on the plexiglass self-adhesive film. We glue the plexiglass to the table with adhesive tape. Remove the film applied to plexiglass, and a film from a mirror film. Spraying Plexiglas water, and even better - soapy solution. We place the mirror film on the glass and drive out all the resulting bubbles.

Step 3 Protruding edges of the mirror film cut off scissors. We leave the entire structure to dry (no less 12 hours).

Step 4 On the dried mirror plexiglass, you need to carefully attach metal strip with transparent superglue.

Step 5 Glue the LED strip on internal side of the metal strip.

Step 6 We drill holes in the metal strip for wires.

Step 7 We polish the received holes.

Step 8 Connection code can be write yourself, or you can use ready-made ones. Scheme connecting the Arduino Uno controller:

Step 9 From plexiglass you need to cut 10 - 15 small rectangles. Using transparent instant glue, attach them to facial side of the mirror. They will serve as supports for designs from glass and metal. The size rectangles should be such that the strip, together with the plexiglass, overlaps our mirror.

Step 10 into rectangles install top design with glass. The adhesive must be completely dry out. It is advisable to put something heavy on top for the best surface bonding.

Step 11 Second (external) film remove from plexiglass. This design can be used as mirror. We install the structure on a table with a tabletop of the same or smaller diameter.

Step 12 We supply food to Arduino and upload our the code.

Not worth it take for the manufacture of a luminous table, if you are not sure that right connect the LED strip to the battery or mains. Wrong or careless can lead to a short closure and fire.
Films that protect glass from external influences, filming lastly so it is save mine appearance.
Before cutting plexiglass in the middle of the circle bilateral sticking a piece of wood with tape bar. It will serve as a support for the router.
Glue must be taken waterproof.
glue you need a good, strong double-sided LED strip scotch. If the tape peels off when the table is completely ready, have to open up the entire structure fixes this problem.
minicontroller put in a box and attach to bottom countertops.

For food ribbons can be used Electricity of the net or build a small battery. When powered by a battery, the table will become even more safe and will not depend on the power grid. It can also be installed in country home without electricity.

LED strips are safe and durable. To illuminate the table, you can use plain or colorful LED strip (they differ only in price). Luminous the table will please the owners and their guests with an unusual design.

How to install desktop lights in the kitchen, see the following video:

In contact with

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos for publication on a topic?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

There are many creative ideas used by furniture makers in the manufacture of masterpieces with their own hands. A bright, original and memorable product that will perfectly decorate a modern interior and create a unique atmosphere is Coffee table ir with infinity effect. It is not very easy to make it, but it is quite possible with some skills in working with wood and glass.

You can place a table with backlight as in office space either in the country or at home. LED lamp used in the assembly of such furniture are absolutely safe for human health, as well as for environment. Such lamps are durable and economical, so the operation of a table with an infinity effect will not lead to increased power consumption.

The illusion of an endless tunnel is created through the use of two mirror surfaces and LEDs located between them. The colors of the lamps used can be any, however, experts say that red diodes allow the tunnel to be deeper, since the red color is less prone to scattering than other colors.

To control the backlight, an on-off button or a special remote control can be used.

Preparing to start work

To make a coffee table with a mirror, you need to prepare necessary tools and materials. The master will need:

boards - wood or chipboard;
sandpaper - it is needed to process the boards after cutting them (if the material is purchased cut into suitable elements, then there is no need to use sandpaper);
ordinary mirror coffee table with a diameter of about 60-70 cm;
translucent mirror - its width should be about 10 cm more than the width of a regular mirror (an additional size is needed so that the glass can be glued to the strips with LEDs); in the absence of a translucent mirror, you can use glass on which a mirror film is glued;
power supply with USB output;
self-adhesive LED strip with a length of at least 1.5–2 m;
wires;
USB to power the microcontroller;
microcontroller and programmer for it;
self-tapping screws;
Super glue;
screwdriver

Some masters prefer to make a table with their own hands using a New Year's garland instead of an LED strip. In this case, there is no need to purchase equipment that equips designs with LED strips (microcontroller, USB).

Table top assembly procedure

First, the frame (sidewalls) of the future structure is assembled from 4 boards using self-tapping screws, then this frame is glued on top of the mirror, on its front side. In this case, the size of the frame must correspond to the dimensions of the mirror.

At the next stage, a frame with LEDs is assembled with your own hands. The outer diameter of the frame can be equal to or greater than the outer diameter of the frame, but the inner diameter must be less than the inner diameter of the frame by 1-2 cm on each side. When the frame is ready, an LED strip is attached to its underside, along the inner edge. Then the frame is attached to the sidewalls with screws. Holes are drilled in the frame through which the wires are brought out.

When all these works are completed, it remains to attach a translucent mirror to the frame. It is fastened with special screws. It is advisable to choose screws that can be removed without special work(in case you need to replace the LEDs). Masters recommend attaching small strips to the edges of the frame, which in height form a single plane with glass. At the final stage of work, it will be possible to attach an upper frame to these slats, which ensures reliable fixation of the tabletop.

Not every craftsman can equip a table with such a mirror, because this material is quite rare. Many furniture makers use plexiglass and a self-adhesive mirror film that is applied to the bottom surface of the glass (the one that will face the mirror).

Mirror-coated glass is also popular, but it must be chosen correctly. To determine if mirror-coated glass is suitable for making an infinity coffee table, you can put a piece of mirror and a piece of glass in parallel, and place any light source between them and visually evaluate the effect.

Another affordable option, which is often preferred by novice craftsmen, is the use of ordinary window glass. But in this case, it will not be possible to achieve a sufficient depth of the infinite tunnel. In addition, the observer will be able to see everything that is inside the table.

One of the most important characteristics One thing to pay attention to when assembling a mirror table is the depth of the tunnel. It is determined by two factors:

the distance between the mirrors (the real distance should be multiplied by 16 to get the approximate apparent depth of the tunnel; in most cases, the real distance from the lower mirror to the upper one is 75-80 mm);
throughput translucent material.

To ensure long-term operation of the backlight and save energy, it is recommended to use a power supply with a 50% power reserve.

There is an easier way to make a do-it-yourself table with an infinity effect. In this case, instead of the LED strip, the usual one is used. christmas garland. First, a square or rectangular frame is made from the bars, then the number of light bulbs on the garland is counted.

After that, marks are applied to the frame in those places where the light bulbs will be located. It is recommended to place them at a distance of about 2 cm from each other. At the next stage of work, holes for light bulbs are drilled in the frame of the future table.

Then light bulbs are inserted into these holes and fixed there. Then you need to stick the frame on the mirror with your own hands, and stick glass with a mirror film on top of the frame.

When the backlit tabletop is ready, it remains to make the base and legs of the table. The legs should be thick enough (about 10 cm in diameter) so that a hole for wires can be drilled inside one of them. Leading wires through the leg is a solution that allows you to make the product as aesthetic as possible. It is possible to run the wires directly from the table top, but this will make the table less beautiful and easier to use.

When the legs are made, in one of them it is necessary to form a through hole with a diameter of about 5 cm. In the upper part of the leg, two grooves should be made through which the wires will pass, and also cut out the corner hole necessary to fix the tabletop.

The height of the hole should be equal to the height of the countertop. The depth of the hole must be calculated individually in each case, it must ensure reliable fixation of the table top. Similar corner holes are made on all four legs.

In addition to the legs, you need to prepare a base in which the countertop will be placed. The width of the base should be such that the base protrudes 8-10 cm on each side of the countertop placed inside it. Free space around the countertop is needed to accommodate wires and related equipment.

A hole is formed in each corner of the tabletop into which the leg is inserted. Then, with the help of self-tapping screws, an external frame is attached to the base, the height of which is equal to the height of the countertop. Then the legs are screwed on, and in finished structure tabletop is placed. In the spaces between the table top and the outer frame, wires are placed, which are led out through the table leg.

When the assembly of the base and tabletop is completed, it remains only to close the space with wires and additionally fix the tabletop inside the base. For this, a special frame is made.

The width of each side of the frame is calculated as follows: the width of the gutter with wires + the thickness of the outer frame + a few centimeters to ensure that the tabletop is fixed by the frame. This frame is assembled from four blanks and fastened with self-tapping screws. Then it is bolted to the outer frame, as well as to the frame of the tabletop with LEDs.

Bolt holes must be pre-drilled to avoid delamination of the wood. The design is ready!

Leave a message!

I will make table with infinity effect to order according to your size. From order to finished product no more than 21 days. Delivery to all regions of Russia by the best transport companies with 100% insurance.

div > .uk-panel", row:true)" data-uk-grid-margin="">

Benefits of ordering an infinity mirror table from us

Table with infinity effect is one of Sofia-Led's main design directions. Our experts put their whole soul into the creation of each copy, which is made by hand. No conveyors and production lines during assembly. Individual approach to each product. The principle of such a table is very simple, everyone has known about it for a long time, and its “composition” also does not stand out for anything that could not be bought in a nearby store. But there is one "but" - you need to correctly assemble this "constructor". Only assembled in the required order, with correct dimensions and distances, an ordinary table will turn into a table with an infinity effect.

Our tables are made using modern equipment and the latest technologies. In the finished version, the table does not look like an item made by hand. This is facilitated by vast experience in the assembly of similar products, as well as the availability of all the necessary modern tools.

Our table with an endless mirror is not a shame to present to colleagues, friends or relatives for a holiday. Do you often host guests and want to impress them with something unusual? Brew tea and seat guests at our table, and the infinity tunnel with dynamic lighting will capture their eyes for a long time. Let's now take a closer look at the benefits of our infinity mirror tables:

The ability to use absolutely any table. Thanks to the presence necessary equipment and vast experience, we can put the infinity effect on any table. It does not matter either the thickness or its dimensions.
Only quality materials . We use time-tested materials and components - from glass and mirrors to LEDs and power supplies.
Maximum reps. Everyone knows that the more repetitions, the more effective the visual effect. Our mirrors give about 20 repetitions. In certain cases, we do more.
Very deep tables. Do you want a deep reflection? No problem. We will achieve this without interfering with the appearance of the table.
Installing an additional backlight. We illuminate not only inside, but also outside.
Additional curly patterns. Using professional equipment, we will add beautiful patterned cutting to the table.

How do we make a table with an infinite mirror

When installing an LED strip, we turn to the section of physics - Optics. We believe that it is necessary to carry out calculations according to the laws of optics, and only with strict observance of all proportions can one achieve ideal dispersion and reflection of light from LEDs.

Additional table lighting

Setting the backlight inside, creating an infinity tunnel, we always suggest lighting the table additionally from the outside. Basically we use the same color as inside. This technique visually expands the visual perception of the tunnel of infinity. But if desired, we can add adjacent colors, for example, the backlight is red, and around a few tones lower or orange. Sea of options for creativity.

Additional patterns

Using various styles table decoration, sometimes it will not be superfluous to resort to a certain design option, for example, "baroque" or "gothic". We will add symmetrically from the infinity tunnel beautiful patterns on a stencil, which we will highlight in any color at the choice of the client.

Below you can choose finished table with standard sizes. But if you need a table with non-standard parameters: round, oval or other irregular shape, lighting according to your own design, etc. - please, Contact us and we will be happy to fulfill your order as soon as possible.