For exterior finishing For building facades, materials such as clinker tiles or facing bricks are increasingly being used. This facade is very practical and has visual appeal. Only you can decide what it will be like for many years to come: stylish, festive, elegant, business or casual. Get creative and create a façade that no one else has.

What is better for decorating the facade: clinker tiles or facing bricks?

When in the process of building a house the question arises: what material to choose, you should not rush. It is necessary to consider this issue from all sides, weigh all the pros and cons.

The first thing you need to evaluate is: which material is more durable - clinker tiles or facing bricks? Of course, brick is a more durable material. But at the same time it is heavier. The tile, despite its fragility in appearance, is no less durable when used as cladding. And, besides, there is no need to carry out foundation work or expand the base. Brick will require additional reinforcement and expansion of the foundation by 12-13 centimeters.

Thanks to these qualities, the process of laying clinker tiles will take significantly less time than laying facing bricks. And if you purchase facing panels with clinker tiles, the installation process will be further reduced. All this will greatly reduce the cost of the work performed.

And in general, if we consider the financial side of the issue. What is cheaper: clinker tiles or facing bricks? The answer to this question is clear: tiles are much cheaper, since the consumption of raw materials is much less. And when you buy clinker tiles for brick, you will get a brick facade at the low price of tiles.

If you look at the service life of these materials. Warranty period for tiles – 50 years. Of course, the service life of the brick is longer. But all this is subject to high-quality surface execution. building material. The destruction of clinker tiles or facing bricks begins with the ingress of water and subsequent freezing.

The advantages of facing bricks are indicated by their quality, such as air conductivity. After finishing with facing bricks, the walls continue to “breathe”. The surface of the clinker tiles is covered special composition, which prevents the penetration of not only moisture, but also air.

The range of clinker tiles is very wide. It is available in various colors and textures. This allows you to create unique facades. The variety of facing bricks is also growing steadily. Materials of different colors and shades are beginning to be produced, and the heterogeneity of texture contributes to the creation of unusual facades that differ in the depth of color.

Clinker tiles are used in construction much more widely than facing bricks. The fact is that it can be used both for finishing the facades of buildings and for interior decoration of premises: fireplaces, stoves, staircases, terraces.

Facing brick is intended for exterior finishing building facades, including houses made of SIP panels . It protects walls from moisture, high and low temperatures, as well as mechanical damage. This is a very durable and reliable material.

Advantages of facing bricks:

• environmental safety - facing bricks are made from natural materials;
• frost resistance;
• resistance to temperature changes and high humidity;
• strength and durability;
• respectable appearance.

However, facing brick creates a high load on the foundation and supporting structures. Therefore, if you have not provided for amplification in advance load-bearing structures at home, you will have to abandon facing the façade with brick.

In addition, facing bricks have several other disadvantages:

• the complexity and duration of the laying process (in order for the brick to lie flat and not fall off, you will have to use the services of a professional layer);
• high cost of material and its installation.

Facade panels: is it worth overpaying?

Plastic siding for brick ( façade panels) repeats the color and texture of brick. From a distance and from photographs, distinguish these two finishing materials almost impossible.

Facade panels are made of polypropylene. They are designed for cladding the base and have increased resistance to mechanical damage and impact atmospheric phenomena– snow, rain, temperature changes, etc. Due to their light weight, facade panels can be used to cover almost any house or part of it.

In terms of strength and durability, facade panels are practically not inferior to natural stone, but at the same time they are much more affordable. Therefore, in most cases, when there is a choice: siding or facing bricks, they give preference to what is cheaper.

Brick siding is a ventilated facade. Air circulates freely through the gap between the building wall and the panels, preventing stagnation of water and the formation of fungi, mold and moss.

In addition, facade panels have the following advantages:

• light weight;
• quick and easy installation;
• protecting the building wall from moisture, mold and rot;
• unattractive to fungi and moss;
• affordable price.

The disadvantages of facade panels include the fact that they are not natural bricks. And upon closer examination (at a distance of less than 1 meter), this is noticeable. In addition, facade panels are less durable and resistant to mechanical damage.

Siding or facing brick: comparison

Both facing materials have sufficient durability (at least 30 years), strength and frost resistance.

Facing bricks are much heavier than siding: one brick weighs from 1 to 2.3 kg. Therefore, its use is limited. Siding – lightweight material, it can be applied to any building.

Laying bricks is a long and labor-intensive process. Just imagine: one brick measures 260 x 120 x 65 mm. The width of one siding panel ranges from 445-470 mm, length - 1130-1217 mm, thickness - 16-23 mm. This fact alone suggests that laying brick will take much longer. In addition, this process is difficult and requires professional skills. The cost of installation can significantly exceed the price of the brick itself.

Installing façade panels is much easier. If you strictly follow the manufacturer's instructions, even a beginner can handle it. This does not require special devices, tools or skills.

Facade panels do not lose their strength after 60 freezing/defrosting cycles. For bricks, this indicator depends on the quality of the material and can fluctuate between 50-100 cycles.

Moss and mold like to settle on the surface of natural brick in damp and shady corners. On plastic panels they don't appear.

Full list distinctive features bricks and facade panels is given in the table below.

Which is better: siding or brick?

So, what to choose, siding or brick, depends on your preference and willingness to pay for natural material. One question remains: is it worth overpaying? Facing brick – natural and beautiful facade material. But given the complexity and high cost of its installation, in some cases it is more advisable to use facade panels.

When executing finishing works Homeowners are faced with a difficult choice: which building material to purchase: facing bricks or clinker tiles?

Wall cladding is a great way to reliably protect your home from negative impact cold, rain and wind. In addition, high-quality masonry can provide the structure with excellent resistance to mechanical damage, as well as prevent fading, thereby maintaining an attractive appearance.

When performing finishing work, homeowners are faced with a difficult choice of which building material to purchase: facing brick or? Each of them has its own advantages and operational features. Today we will look at the advantages of materials and find out which material is better and in what case.

Facing brick and its features

Bricks for finishing facades are produced in the form of a parallelepiped of regular shape. It may differ in type, size, texture and color palette. Facing material Widely used for outdoor and interior decoration. It looks great in the interior of the room. Fireplace portals, stairs, doorways and kitchen aprons can be finished.

The main advantages of this building material include:

• a wide range of domestic and European production;
• wide choice of colors: from light yellow to black;
• excellent resistance to UV rays and sudden changes temperature conditions;
• long service life without repair.