Our company offers its services for urgent repair of boilers for equipment located throughout Moscow and the Moscow region. We carry out troubleshooting professionally, quickly, efficiently, at affordable prices, with a guarantee. The AIS company currently has more than 10 years of experience in boiler repair and can offer not only simple boiler repairs, but also annual maintenance and repair of breakdowns of any complexity.

Our engineers and craftsmen have a wealth of knowledge and skills, as well as professional tools without which boiler repairs cannot be carried out professionally.

We offer boiler repair:

High-class specialists with extensive experience;
- Processing your call regarding boiler repair as soon as possible;
- You will immediately find out over the phone the price for the repairs being carried out; we answer openly and honestly from the very beginning;
- Quick departure for boiler repairs in Moscow and throughout the Moscow region;
- Diagnosis of faults is carried out using only professional tools;
- Boiler repairs are carried out using original spare parts;
- Boiler repairs are carried out necessarily with a subsequent guarantee for the work done and spare parts.

The specialists of our service center will repair any faults; for them there are no difficult tasks that cannot be solved.

The professionals of our company will repair the boiler as quickly as possible, 90% in one visit.

Common causes of malfunction leading to boiler repair:

The installation of the heating system was carried out unprofessionally and did not comply with the conditions;
- failure to comply with the manufacturer's operating recommendations heating equipment;
- the necessary maintenance operations, which must be carried out annually, are not carried out;
- no additional protective equipment is used, such as a voltage stabilizer.

Common boiler malfunctions and repairs:

The flame in the burner goes out when the unit starts;

A lot of soot is formed;

Loud popping noises are heard when the equipment is operating;

The boiler does not turn on and does not respond to the reset button;

The pressure in the heating system constantly drops.

If you have problems with the operation of your boiler equipment, call us, the specialists of our company will come to you urgently in order to repair heating boilers from any manufacturer in the shortest possible time. Specialists constantly improve their knowledge and increase their experience by going out to repair heating boilers of any degree of complexity.

AIS company always strives for fruitful cooperation with its clients. Personal approach to each client, discounts, well-executed difficult work, work guarantees.

Professional service of Thermona heating equipment- the key to its stable and efficient work for many years. Boilers from the Czech manufacturer are characterized by high performance and quality of materials. With proper care and maintenance, these units will delight their owners not only economical work, but also low fuel consumption.

Our center offers professional service for the entire line of THERM boilers. E-Tech craftsmen have all the necessary permits and certificates to work with Thermona heating equipment. You can invite our specialists to carry out one-time service, or you can enter into a long-term contract that provides significant discounts. We provide an official guarantee for all types of work and materials.

Features of the Thermona gas heat generator service

Most boiler models have THERM installed copper heat exchanger, protected from corrosion by a layer of aluminum silicone. To maintain a minimum level of heat loss, the outer surface of the plates and inner part The heat exchanger must be kept clean. As a preventive measure, it is recommended to install a filter at the inlet of the return water boiler.

Another feature gas generators heat from the Czech manufacturer is a combustion chamber made of coated aluminum sheet metal. This material is resistant to corrosion and various deposits. However, without regular cleaning, hidden defects can go unnoticed and develop into a serious problem. In addition, contaminated working surfaces greatly reduce boiler performance, increasing fuel consumption and reducing heat transfer rates.

At the bottom of the combustion chamber of THERM boilers there is a water-cooled gas burner, equipped with ignition electrodes and a control ionizing combustion electrode. Special attention during routine maintenance work this should be the focus the most important element heating system. Over time, due to the natural accumulation of soot and soot, its performance decreases. In this case, ignition reliability and combustion stability are significantly deteriorated. This leads to increased fuel consumption and high volume production. carbon monoxide, dangerous to the life and health of people. Cleaning and timely replacement of spare parts during service helps to avoid all these problems.

Condensation gas boilers THERM 28 KD/KDZ/KDC, 45 KD are equipped with a siphon to collect condensate. Care must be taken to ensure that the outlet pipe remains clean, otherwise, if the condensate outlet becomes clogged, resonance of the combustion chamber will follow.

THERM EL electric heat generators, with a power from 5 to 45 kW, use powerful rods (up to six pieces) to heat water, operating on the principle of uniform load. The processor analyzes the operating time of individual heating rods and always turns them on so that the load is evenly distributed over both the boiler body and the heating rods. This significantly increases the service life of the device and its reliability. In order for the heating elements to remain effective for many years, not much is required - regular cleaning, replacement of worn parts and correct operation of the control system. All these activities are included in the routine maintenance of THERM EL boilers.

The main protection function lies on the emergency thermostat built into electric boilers. It blocks operation if a malfunction is detected. Elimination of problems identified by the emergency thermostat by the user himself is impossible; unlocking can only be done manually by a service specialist after eliminating the cause
failure.

Floor-standing cast iron boilers THERM is modern gas devices, used for heating apartments, mansions, medical institutions, shops and other facilities. The “heart” of these units is a gas burner with stainless steel burner tubes, manufactured and positioned so that the amount of waste flue gases remained within minimum limits, and all boiler equipment worked with high efficiency. Condition correct operation The burner is the precise placement of the nozzles against the diffuser tubes. Therefore, under no circumstances should the gas platform be allowed to be deformed by unqualified actions. Only a professional service technician can adjust and balance the burner!

The most common and optimal for creating cascade installations are THERM DUO 50, DUO 50 T, DUO 50 FT, TRIO 90 and TRIO 90 T boilers in all their modifications. Other boilers with a power of 28 or 20 kW are also suitable for the cascade.

The technical solutions used in the boiler cascade system make it possible to combine all variants of THERM boilers with Dims control automation. These include units with a digital display on the left side of the control panel. An exception is boilers with continuous heating of the hot water supply circuit CX and TCX. The efficiency of a cascade installation largely depends on the right project boiler room Particular attention should be paid to power calculations. It often happens that as a result of overestimating or, conversely, underestimating this parameter, the boiler room begins to fail to meet your requirements.

Uneconomical operation, unnecessary increase in capital investment or lack of heat are the most common consequences of design errors. Since our service center is part of the E-Tech Group of companies, providing a full range of services in the field of creation heating systems, our specialists can not only repair the THERM boiler, but also carry out the design, installation and maintenance of a system of any complexity based on these boilers.

We have a team of certified engineers (each employee has an SRO permit and a license for the relevant activity). Having received a request for repair of a Thermona boiler, we send specialists to the address you specified.

Restoring water heating equipment does not take much time. Having found out the nature of the malfunction over the phone, our employees take with them not only everything necessary tools, but also spare parts: gas throttle, relays, burners and others. Please note that for high-quality repair of Thermona boilers, it may be necessary to replace not only small components, but also entire units.

Additional information

Having studied in detail the design of boilers of the famous Thermona brand and learned methods for eliminating typical faults, we restore this equipment to factory condition. The service center provides a 1-year warranty on the work performed, as well as on spare parts used during the repair of the Thermona boiler.

The mobile team serves all districts of the capital, as well as the region. Our service center accepts requests 24/7, 7 days a week. You can rely on the help of experienced engineers. As for the cost of repairing Thermona boilers, it is calculated individually for each client.