A doorway without a door is sometimes an original way out when solving the problem of combining living space. For example, not all homeowners want to install a door between the hallway and the living room, especially if the layout of the apartment allows for this. Quite often practiced, combining a loggia with a room is also done by removing the window and door frame, which expands usable area. However, both of the solutions given above as examples at the same time create new problem- original and neat design of the resulting opening.

Today the construction market offers a very wide range of various materials, allowing you to decorate your living space in any style and to suit every taste. Therefore, there should be no problems in implementing even the most intricate project. Moreover, you can get by relatively low cost, at the same time, richly decorate the doorway with a beautiful and original platband.

There is no need to think that the design of this interior element is not as significant as, for example, the walls or ceiling. Until the last decorative details are installed, general view the premises will not have the required completeness.

Finishing materials for doorways

Developed by modern designers large number design options for doorways, which are carried out using different materials. These include the following:

• Decorative clinker tiles.
• Stucco molding made of gypsum, or its imitation made of polyurethane.
• Plastic panels.
• Artificial stone.
• Natural wood.

In addition to the finishing material itself, the chosen shape of the doorway itself can become a decorative detail of the interior. And it can vary from traditional rectangular options to asymmetrical complex configurations.

Finishing with any of the above materials can be done independently, having previously developed a design sketch and having on hand necessary tools and materials.

Clinker tiles

One of the traditional solutions for finishing an opening is cladding with clinker tiles to look like brick.

Finishing doorways with clinker tiles has recently become a fairly popular trend - this can be explained by the variety of colors of this material and the ease of its use. Not only straight versions of tiles are produced, but also corner ones, which are convenient for lining the corners of doorways, and they are suitable for both traditional rectangular shapes and for arches or semi-arches.

Most often used for external facade finishing, but for certain rooms and doorways it will be perfect, especially if it harmonizes with the decoration of the walls. Sometimes, in addition, in combination with the doorway, the areas around the windows are also covered with the same material, thanks to which the room immediately acquires its own style.

Sometimes clinker tiles are used in combination with smoothly plastered walls.

Markings are made on the walls according to the drawn up sketch. This process is especially important if the tiles are laid out in a chaotic asymmetrical pattern.

The tiles are laid in different ways, creating a smooth edge or a jagged, stepped edge; they are often installed offset.

Before laying the tiles, it is recommended to additionally treat the area on the wall to be tiled, which will improve adhesion construction compounds, and the material is guaranteed to be securely glued to the surface. The primer must be completely dry before gluing the tiles.

Clinker tiles are glued to tile adhesive or “liquid” nails - the adhesive composition is selected depending on the quality of the wall surface. If the wall has flaws or small irregularities, it is best to use tile adhesive. “Liquid” nails can only be used when perfectly flat surface.

The glue is applied very carefully to the back surface of the tile. If a cement or gypsum-based mortar is used, then its excess must be removed immediately, and it is better to try so that it does not protrude beyond the boundaries of the tile.

It is very important to ensure that the tiles are laid exactly horizontally. This parameter must be controlled using building level constantly during facing work.

When the glue has set, these calibration strips can be removed from the seams and the masonry can be left until the mortar has completely dried.

After the glue has dried, the seams between the tiles are sealed with grout of a suitable color, in harmony with the finishing material or the shade of the walls.

Artificial stone

Finishing with artificial stone is also quite a stylish option, especially since the choice of this material is even much wider than that of clinker tiles. It is made from natural rocks, crushed into crumbs, to which various polymers and dyes are added.

Artificial material very reliably imitates the appearance and texture of natural stone - it can be limestone, malachite, shell rock, jasper, marble and other rocks. There is an option that is simply called “wild stone”, that is, without processing, which looks very original.

The colors of this material are varied, from cold gray to warm ocher, so it can always be matched to the shades of the interior.

The advantages of finishing surfaces with artificial stone include the following qualities:

• Presentable, aesthetic and stylish appearance.
• Excellent harmony with other materials.
• Resistance to mechanical damage with proper installation.
• Long service life without changing appearance.
• Simplicity in daily care of finishing.

To decorate a doorway, compact sizes are usually selected artificial stone, with a not very deep relief pattern, otherwise it will look too bulky.

For corners, it is best to choose special corner elements that are easy to install and securely fasten to surfaces.

Finishing with this material is carried out in different ways - sometimes it is laid, maintaining an even border, but more often the “torn edge” design technique is used. Using this masonry method, the finish is more natural, original and does not look “boring”.

Of course, when choosing one of the options for placing tiles on the wall and in the opening, you need to rely on general style decoration of the entire room.

The artificial stone is fixed in the same way as clinker tiles, using one of the tile adhesives or “liquid nails”. It is necessary to take into account that this material is much heavier than tiles, since it is often thicker, so the wall for its installation must be especially carefully prepared, be sure to treat it in several layers with a primer.

Cladding with artificial stone is quite labor-intensive work, since each of the elements must be glued to the wall and held for some time so that the composition sets. In addition, it must be said that this is a rather expensive material. However, it is worth it - the effect of a high-quality finish will be amazing.

Stucco molding, natural gypsum and artificial

Stucco molding around the perimeter of the opening without a door - columns with pilasters and capitals.

Nowadays, stucco molding inside modern apartments and houses can be seen quite rarely, although it is one of the most interesting design styles, including doorways. Naturally, stucco molding is not suitable for every interior - it must be maintained in a certain style, and all elements in it must be harmoniously combined with each other.

However, if it is decided to design one of the rooms in a classical, Doric, Venetian or other similar style, where the presence of stucco elements is expected and would not be absurd, then decorating the doorway with it will certainly be “in keeping with the theme.”

Previously, gypsum was used to decorate rooms and facades, and columns were often made of natural limestone. Today, these interior parts are also made from polyurethane.

Plaster stucco elements are quite heavy, so they are quite difficult to attach to the walls. Installation is also complicated by the fact that gypsum in its hardened form is very fragile, and if it falls even from a small height or with careless actions during cladding, the finishing element can break into pieces.

Gypsum stucco is, of course, a “classic of the genre”, but working with it is quite difficult

Polyurethane is very light, adheres well and adheres to any surface.

It is much more convenient to carry out finishing - use polyurethane parts “under stucco molding”

A very wide range of different parts are produced for decorating a doorway - these can be borders, pilasters with capitals, or even full-fledged columns that are glued to the ceiling and wall.

The range of polyurethane parts with imitation stucco molding is very wide

The variety of shapes and relief patterns of these decorative elements allows you to choose them to suit any, most demanding taste. It is also very important that polyurethane can be easily painted, which can create an imitation of natural stone or make the surface of parts glossy and perfectly white.

Similar polymer parts are also produced for modern design- with a relief that does not have floral patterns, elements of columns and capitals, but is made in the form of moldings. Although they can also be combined with modest trims that will complement arched or straight elements.

This type of polyurethane finish can be disguised as natural wood or stone, painting them in the right color and varnished.

Installation of polyurethane parts can be easily carried out independently using one of the polymer adhesives, “liquid nails” or special “Moment” glue.

It’s probably worth noting that columns and pilasters are not particularly suitable for small-sized apartments, since such details will overload the space and make it seem even smaller.

If your house or apartment has high ceilings that make the rooms uncomfortable, you should round them sharp corners doorway and choose the arched option for this.

In the case when a hall or hall in a large house is decorated with polyurethane parts, it is best to use columns decorated with Doric reliefs to create pomp and grandeur.

Plastic panels

Plastic kits for decorating doorways can even be purchased ready-made - they are produced for openings different forms: rectangular, arched and semi-arched, designed for different heights and widths. Platbands can be white or made with a textured pattern of one of the wood species that may have different shades. Selecting the color of the platband to match the overall scheme of the interior will not be difficult, as well as installing them on the walls of the doorway.

Typically a finishing kit consists of the following elements:

• Platband, which is fixed with outside opening on the wall. As a rule, this element consists of three parts - a top bar and two side ones. If the opening is made in the form of an arch, then upper part should be arched. If an opening is being finished that will be used without a door leaf, then the kit should include two trims, for one and the other side of the doorway.
• An additional strip that is mounted directly on the walls of the opening along its thickness and covers it completely.

• For an arched opening, it must also be made in a certain configuration. Some kits are made from fairly flexible plastic, so they bend perfectly to the desired shape. However, when purchasing such a kit, it is worth asking the seller to demonstrate the flexibility of the material right in the store.

Decorating doorways with just such a plastic kit is very popular, since it has a relatively affordable price and has a number of positive characteristics, which include:

• Ease of installation of elements, which will not be difficult to do yourself.
• Sufficient resistance to mechanical stress with careful use.
• Easy to care for, as the material does not accumulate dust and can be easily cleaned with a damp soft cloth.
• Possibility to disguise communication cables under panels. Some kits have a special entrance for them in interior space platband, located at the level of the baseboard, and the design provides special channels for laying wires.
• Plastic panels give the doorway neatness and visually highlight it with an aesthetic frame.

Fastening of elements of plastic platbands and extensions to the walls is carried out in different ways- this can be by gluing them to surfaces using “liquid nails”, and sometimes they are attached with locking joints to special guides that are included in the finishing kit.

Wood finish

Wooden trims are traditional for finishing doors and window openings, but not many people know that they can have a variety of shapes and designs. Of course, having decorative elements, carved by hand or on special equipment, will not be cheap, but they will also be used for a very long time.

If necessary, wooden frames you can repaint, for example, if the entire interior of the room changes, including the color of the walls.

Wood finishing materials can be selected to suit any design style - they can look very simple or be decorated with figured carvings. An important advantage of the material itself and products made from it is its environmental friendliness.

In addition, it should be noted that even the most inexpensive wood, but well processed and coated necessary means to preserve the material, and also decorated with paints and varnishes, it will be impossible to distinguish it from expensive wood. Carrying out these processes is not at all difficult, so you can save on them by purchasing or ordering the frames in an unprocessed form to the master.

Despite the emergence of a large number of new types of materials from which platbands are made, wood will never lose its popularity and is often chosen to design doorways of any shape.

Doorway shape

Since the shape of the doorway plays an important role in interior design, especially if it is not planned to install a door on it, this parameter should be considered separately. The configuration of the doorway may be familiar to many - rectangular, emphasizing classic style– arched, asymmetrical, trapezoidal and other shapes.

Arched doorway

The arched configuration has recently become especially popular when constructing a doorway without a door. This form has become widespread for decorating passages both in standard apartments and in large private houses.

The advantage of this shape is that it softens sharp corners. Visually, the arch makes the ceiling higher in an apartment, and “lowers” ​​it somewhat when the ceilings in mansions are too high. If you need to visually “lower” the ceiling, making the room more comfortable, you only need to slightly widen the arched opening, making it almost completely semicircular, without vertical sections.

In addition, such an arch will expand the space, and both rooms united by it will look much larger.

An arched opening is usually installed between the living room and the kitchen or hallway. This solution makes the design original and the interior more interesting. Each apartment owner, performing installation independently, gets the opportunity to make it exclusive.

This type of opening is also ideal for combining a loggia with a living space. Thanks to the expansion arched design the room will visually appear larger than it actually is.

Try making an arch yourself!

In skillful hands, drywall turns into a truly universal material, opening up the broadest possibilities for independently creating the most complex interior elements. For a diligent and careful apartment owner it should not amount to special difficulties making . To help him, there is a special publication on our portal.

Video: a variety of interior solutions with an arched opening without a door

Trapezoidal opening

A doorway of this shape cannot be called popular, and it is quite rare to find it, especially in a city apartment. It must be said what a frame is, especially one that has dark shade, has a somewhat depressing effect on the psyche. It may be more rational to use such a form in large rooms, where it will not become the compositional center of the design, but will neatly fit into it along with other decorative elements.

The appropriateness of a trapezoidal opening in a residential area is highly questionable

If, nevertheless, it is decided to use this form to design an opening in an apartment where the ceiling is not very high, then you should not make the upper horizontal part of the trapezoid too narrow. Such a shape will not only visually narrow the room and lower the ceiling - it will seem to weigh down the interior and, oddly enough, spoil the mood.

Such “hard” forms can negatively affect a person’s psycho-emotional state

The absence of smooth shapes in the doorway will make the room uncomfortable, even if wallpaper or other material is used for its overall design. decorative finishing warm shades. Therefore, if you choose the shape of a doorway without a door, then it is better to immediately abandon this option.

Asymmetrical opening shapes

There are a great many options for asymmetrical openings - they can have smooth, angular shapes or combine several of the configurations. When choosing fancy lines for an opening, you need to remember not only about the supporting structures of the house - it is not always possible to widen the opening to the expected width.

Asymmetrical openings - the widest field for the owners’ fantasies

Very important point- This psychological impact forms on the mood of residents. If you don’t want constant clashes, irritability and misunderstandings in the family, it is best to avoid sharp corners and sharp shapes of doorways. If you still cannot do without such outlines, then they need to be smoothed out by placing smooth rounded transitions and shapes nearby.

Due to the fact that today in the construction markets you can find not only ready-made arched or asymmetrical kits for decorating openings, but also a lot of other materials, designers and amateur finishers are creating the most unrealistic decorative configurations. One of the materials most often used for such work is drywall. It is used for cladding structures made from galvanized metal profiles. These building materials They have a very affordable price, but to make complex, decoratively designed interior transitions, you will have to put in all your efforts and spend a lot of time, as well as seriously work on the project first, adapting it for a specific doorway.

Drywall is a unique material for the construction of walls and partitions.

When planning a redevelopment, erecting new partitions or reconstructing existing ones, it is best to rely on the use of plasterboard. A special publication on our portal is devoted to the process of independently creating internal ones.

To summarize, it should be noted that the above options for designing doorways without installing door panels are by no means the only possible ones. It is quite possible to independently develop and implement your own own project design of this interior element. In this case, it is necessary to take into account the structural structure of the entire structure, since an expanded doorway in some cases can weaken the load-bearing walls and ceiling, which is extremely dangerous not only for residents of the upper floors, but also for those who live in a reconstructed apartment.

If any doubts arise when drawing up a project, then it is best to contact specialists to make calculations or even complete all the work. They will identify opportunities load-bearing structures and calculate the permissible limits for the expansion of doorways without compromising general design the entire building.

There are various options doorway finishing. They help to obtain a harmonious and stylish design premises. It must be taken into account that these designs are divided into two types, which depend on the presence or absence of a door leaf. It is this element that determines the sequence of activities carried out in order to obtain the desired effect.

Methods for lining openings without door panels

There are two main options for finishing a doorway without a door:

1. Standard. This technology provides for lining openings with various materials, without changing the design.
2. Arched. This method involves changing the configuration of the opening - significantly or slightly.

Each method requires compliance with certain rules, as well as accuracy.

Various types of materials for standard finishing

To design a doorway without a door, finishing products are used that have different technological features.

PVC panels

This option is one of the most popular. This is facilitated by the fact that such products have excellent characteristics and are also very affordable. For installation, the glue-on method is often used. The panels are mainly used to cover slopes. Other parts of the doorway are finished with other materials.

Note! PVC products require careful selection. To create a coating that will look harmonious in the interior, you should give preference to varieties made as imitation of natural materials.

Everything is done as follows:

Requires leaving the structure for a while to avoid displacement of elements. Now let's start eliminating external joints. If you cover them with plastic corners, as is done when covering windows, you may get a not very attractive effect. Therefore, it is better to putty with putty. Then you can begin the subsequent finishing. For this purpose, painting and wallpapering are carried out.

You should know! There are plastic trims that combine well with PVC panels. But pruning them is a very labor-intensive task. The fact is that it is necessary to adjust the elements at an angle of 90 degrees.

The best replacement for PVC would be MDF panels. Finishing openings with this material goes well with other products. If it is necessary to cladding structures using this method in order to eliminate formations visible joints, lamination is used.

Covering the door slope with MDF

Stucco molding

It is immediately worth noting that stucco molding is currently used, which is made from polyurethane. Unlike gypsum options, this type The product is characterized by low weight. Its installation can be performed without the involvement of additional assistants. Important feature What makes this material so special is that it can be processed further. That is, it is easy to paint in different colors.

The finishing of the opening is carried out according to a certain scheme:

• All parts and glue are pre-conditioned in the room where installation will take place for 24 hours. This will ensure that all elements get used to the existing microclimate.
• The areas that will be pasted over are carefully coated with a primer. Only compositions that have a deep penetrating effect are selected.
  

  Important! It should be remembered that the stucco sticker is done first. Only after this can general finishing of the walls be carried out.

• The surfaces of the products are slightly rubbed with sandpaper. Next, glue is applied. It is evenly distributed along the wrong side of the fragments. Now the stucco molding is applied to the selected area and pressed well. To prevent the elements from slipping, small screws are screwed under them.
• If excess glue appears, it is removed immediately. When this cannot be done immediately, you can use acetone, which is used to moisten a sponge.
• An important point is the joining of elements. It can be carried out at a right angle (perpendicular installation), or trimming can be performed, which is done at an angle of 45 degrees.
• After cladding, joints appear. They are hidden using putty, which, after drying, is rubbed down with sandpaper. Particular care should be taken when finishing between rooms, because it is necessary to provide for the location of parts on both sides.

Decorating a doorway with stucco requires some nuances. This option is most suitable for rooms that have fairly high ceilings. If you use it for small rooms, then it is advisable to carefully consider the location of all elements. The fact is that it is quite easy to overload a room so that the interior becomes simply ruined.

Artificial stone

The use of artificial stone is great solution, which helps to decorate a doorway without a door in a very stylish and modern way. This option is superior to similar products due to the fact that the material is produced in a wide decorative range. For example, clinker tiles are also used for cladding such structures, but their choice is quite limited.

Note! It should be borne in mind that the concept “artificial” does not detract from the merits of this product. The imitation is carried out with excellent accuracy. The texture and shades of natural stones are repeated.

Decorating a doorway with artificial stone

Before decorating a doorway without a door with decorative stone, you should familiarize yourself with its advantages. The following advantages of the material are highlighted:

• Excellent appearance that brings presentability to the interior.
• Possibility of combination with other finishing materials.
• Excellent resistance to mechanical stress.
• Durability. The service life is calculated in decades.

Small-sized products that have some relief are used for work. If you choose a deeper texture, it will look very bulky.

Cladding is carried out using various technologies. Often laying is done in a way that allows for uneven edges to be formed.

Note! Currently, special elements have been developed that act as corner pads. They allow you to avoid unnecessary pruning.

Making the opening is quite simple:

1. Marking is carried out in selected areas. It should repeat the developed scheme. To carry out this process most accurately, the stone is laid out on the floor in a given order.
2. Wall surfaces are treated with primers that have deep penetration. This will improve adhesion. It is important to let all areas dry thoroughly.
3. Fixation can be carried out using special tile adhesive or “liquid nails”. The second option is suitable for cases where the base has almost perfect evenness.
4. The composition is applied to the reverse side of the elements. It is important to remove any excess.
5. The stone is laid in ways that make it possible to form a seam or make do with a monolithic surface (without joints).
6. The parts settle into place and press together. It is important to achieve good grip.
7. If joints have been formed, they are rubbed down. The color of the mixture can be contrasting or monochromatic.

If the question arises: what is the best way to decorate a doorway that does not have doors, the first thing to consider is options that include artificial stone, decorative brick and clinker.

Plaster

Recently, this material has seen a noticeable decline in popularity. But just recently, about ten years ago, this method seemed to be the most accessible. It's safe to say that many people simply underestimate plaster. Indeed, this option has several significant shortcomings– labor-intensive application (in the absence of experience) and the presence of a certain amount of “dirt”. But if you do all the work correctly, and also achieve a combination with other products, the effect will be pleasantly surprising.

How to decorate a doorway without a door by plastering:

1. The required amount of mixture is prepared. The solution made should be in such quantity that it is enough for 30-45 minutes of work.
2. The mixture is applied to the surface by casting. Leveling occurs using a rule or a wide spatula.
3. If required, beacons and perforated profile guides are installed.
4. When the mortar layer exceeds 1-1.5 cm, a reinforcing mesh is laid.

This surface can be painted. But it’s better if the plaster serves as the starting composition. Then the finishing touch can be decorative (textured) putty. It is applied in a certain order, which allows you to get an amazing coating. Such doorways will decorate the interior.

Decorative plaster– an effective design option for a doorway without a door

Arch device

An arch can transform an interior. It is important to understand that a device of this design requires some experience. After all, to decorate a doorway exclusively with your own hands, you will need to spend a lot of effort.

You should know! There are standard-sized arches that are completely ready for installation. They just need to be carefully installed.

Doorway in the form of an arch

The easiest way to make arches is made of plasterboard. It looks like this:

1. Finishing doorways begins with installing a frame on both sides. It is fixed on the upper horizontal and vertical posts. On the latter, it has a size that is almost equal to the end of the rounding.
2. GCR parts are attached to the frame. An arc is pre-cut on them; a stencil is made for this.
3. Additional lathing is performed inside the resulting structure. It serves to fasten the last arcuate plasterboard element.
4. The final finishing is done with putty. Decorative cladding made from various materials.

The arch can be made using more “noble” products, but will require more skill.

Other design methods

The design of doorways can be done using other methods. They involve the use of decorative curtains or screens. This method is very affordable and simple. In addition, it does not require virtually any work.

Various options can be used:

1. Fabric curtains. They will be a great addition to any interior. The composition should be composed in such a way that there is harmony with other elements and combination with window decoration.
2. Bamboo curtains. This option is suitable when the room is made in eco style.
3. Thread curtains. These products are used if you want to fill the room with unusualness.

Of course, everyone chooses how to design the opening based on their taste and preferences.

Photo gallery: options for finishing doorways without doors (20 photos)

What can be done with an opening equipped with a door

Deciding how to make a doorway that has a door leaf involves using the most simple options. The only difference is where this structure is located.

Simple arrangement of interior space

Most affordable option finishing interior openings installation of the box and adjacent elements is considered. General technology is this:

• The box is installed. It can be equipped with a threshold or without it.
• Extensions are used as materials that will line the slopes. They are available in standard sizes (up to 120-150 mm).
• These elements are attached using a groove on the box. If such a design feature is not provided, then fixation is performed using self-tapping screws. The hole for them is drilled through the end of the part.
• External finishing is done using platbands that frame the opening.

This option is great for situations where you need to cladding not very wide structures.

Other options

How to decorate a doorway that has a door in a more original way? In reality, to create a truly interesting option, you need to try. The fact is that it is the hanging canvas that limits the use of different materials. Improper use of finishing products prevents opening. Although, if we take this feature into account, then for exterior finishing Almost everything fits.

Note! There is a sliding way to open the door. That is, the canvases repeat the design of compartment doors. This is a rather interesting technological solution that requires a more careful selection of facing products.

How to finish a doorway? This question has many answers, depending on specific situation. But no matter what anyone advises, you still need to listen to your heart and choose the option that will be closest to you.

During repair work the owners may have a dilemma - whether to install or better replace them with more modern version decoration, for example, with an arch. By removing the doors, you can solve several problems at once: decorate your home and save free space. That's why most people choose alternative options. Let's figure out how to decorate a doorway beautifully and without much effort, the main pros and cons existing methods decorating the passages between rooms, as well as the appropriateness of such redevelopment in various situations.

In what cases are interior doors not required?

The interior opening can be varied

The answer to this question largely depends on functional purpose premises that are planned to be combined, and individual characteristics housing. The passage between the kitchen and living room is often remodeled. This redevelopment makes sense if the kitchen area is small. The dining area can be moved into the room, freeing up useful kitchen space.

Replacing the door with an arch or another option for opening the opening will be no less relevant in the case of connecting a balcony to one of the rooms. This will ensure a smooth transition between them, and the two rooms will seem to merge into one, which will visually enlarge the room.

A passage designed in the form of a portal will also look good if there is a small dressing room located between front door and a corridor. But making such an entrance to the bedroom, even if it is draped with curtains, is hardly appropriate.

Possible finishing options

So, if you decide that the layout of your home allows you to refresh the interior by changing the appearance of doorways, then first you should learn more about existing varieties such finishing. Let's look at some of the most popular ways to decorate the passage between rooms.

Arches in the doorway. What are they?

Arch

Installing an arch in a doorway is one of the most popular ways to decorate the entrance to a room. It can be performed in several variations:

1. Oval. This arch is considered standard and has a rounded shape. To create it, you will need to round the corners of the opening using drywall and a metal frame.
2. Rectangle. The most easily implemented option that does not require the installation of additional structures.
3. Complex shapes. Giving a doorway a more exotic look is impossible without installing a complex plasterboard construction and, most likely, will require the involvement of builders and finishers.
4. Imitation. This type of arch is relevant if the door structure is of a significant size and does not look very beautiful in a rectangular form. To give such a passage a rounded shape, semicircular segments are installed at its corners.

All types of arches, except unusual shapes, are quite simple to implement. However, there is also a minus - they cannot be installed in any room, because the installation requires a considerable height of ceilings. Therefore, for those who are not very lucky with this option, it is better to choose another decor option.

Stone decoration is always in fashion

A bright accent in the interior will be a doorway painted in contrasting colors or highlighted using various facing materials. And stone decoration for this purpose is one of best solutions. Stone for finishing can be used both natural and artificial. The first is used less frequently due to its high cost and less ease of installation and operation.

Stone finishing

Installation of natural stone is not an easy process, and entrusting it to better for professionals. But with cladding artificial panels“under the stone” it is quite possible to do it yourself, securing them with tile adhesive. At the same time, in appearance they will be practically in no way inferior to the real material.

Pay attention! In order for the stone finish to harmonize with the rest of the interior, it is worth placing in the room objects with elements made of a similar material, for example, a mirror in a frame, shelves, wall panels or false fireplace.

Decoration with stucco: beautiful and practical

Polyurethane stucco molding is also very popular when decorating doorways. It has many advantages: it is easy to attach, quite durable, and, being initially white, lends itself well to painting.

But when deciding to decorate with this material, you need to remember that it often looks very cumbersome. Therefore, if the rooms are small, it makes sense to choose flat rather than raised elements, so as not to visually overload the room.

Curtains in the doorway: an affordable solution

Curtains are a great solution!

Draping curtains is another way to refine a doorway. The advantage of this type of design is that it not only allows you to emphasize the passage between rooms, but also, if necessary, hide it. The advantages also include ease of installation, affordability and wide selection color range and materials.

Curtains in the doorway can be either fabric or in the form of “hangers”. You can use ordinary traditional curtains as fabric curtains, but it is better to purchase products specially designed for this purpose.

So-called “pendants” are used more often for decorating doors. They can cover the entire opening or have the appearance of a frame. The materials used to make them are wood, plastic, bamboo, various cords, beads, etc. If you wish, you can easily make such a decoration with your own hands.

Video on how to create a door arch with your own hands

In this section, we invite you to familiarize yourself with the features of installing and decorating a door arch with your own hands. The video will help you understand all the nuances of this matter.

Photos of interiors with interesting door space decor

As you can see, there are many options for designing a doorway. We have described only some of them, but in reality there are many times more of them and anyone who decides to replace the boring and standard door structure for something more original, he will be able to find a solution to his liking. Make a choice and get a few interesting ideas The photos below will help you.

Arches continue to hold the palm of leadership among the decorative decoration of doorways. This is not surprising, because in addition to the classic round shape, there are many other variations. For example, by performing a small redevelopment and expanding the entrance to the room, you can install an arch with niches or shelves. It will not only add variety to the interior, but can also serve as a stand for indoor plants, your photos or souvenirs.

Those who like minimalism can opt for a simple but original arch in the shape of a circle.

For lovers of luxury, this method of decorating doors also opens up a lot of possibilities. An arch finished with polyurethane stucco molding will turn your home into a real palace.

Don't forget about curtains. Such bamboo curtains will fit perfectly into an interior decorated in ethno style.

Another original version– thread curtains. They look very gentle, but at the same time bright, and the variety of colors allows you to choose curtains that are ideal for your home.

Ensuring the privacy of each family member in a large apartment is the responsibility of interior doors. If there is a lot of living space, and there is no need to enclose the space, you can beautifully equip a doorway without a door. The absence of a door leaf between rooms is enough practical option expansion of space. This is especially true for small apartments. Also, thanks to this solution, you can arrange pieces of furniture more conveniently. Finishing a doorway without a door is definitely profitable solution. It is worth learning more about the features of its implementation.

Features of doorless openings

This design is equipped in such a way that the door frame is completely eliminated. You also need to choose the size of the opening and its shape. The interior is determined by the design solutions present in the adjacent rooms. If an arched structure is chosen, it is necessary to take into account the height of the ceiling and the location of the load-bearing walls. Photos of doorways without doors can be seen below.

Usually standard solution which is accepted in such a situation is decorative finishing using the following materials:

• panel plastic;
• artificial or natural stone;
• polyurethane stucco molding.

Curtains and screens can be used as additional decorative elements. Particularly popular are materials that do not lose their characteristics even after many years of use.

Advantages of an open doorway

One of the popular solutions in terms of equipment for openings is the device sliding doors. They do not require much space for installation, so they are often installed in apartments with small dimensions.

Properly designed open openings look quite attractive. They create the effect of combining adjacent rooms. This solution also improves the quality of apartment ventilation. Such openings also look great if they open onto an insulated balcony.

Thanks to the equipment of a doorless space, you can completely compensate for the standard layout. It's worth the money and effort. To one of distinctive features such openings is a reduction in the cost of materials that will be used to design a doorway without a door.

A doorway (for example, to a kitchen) that is not equipped with a door leaf is an advantageous solution for the interior. The implementation of various finishes, presented in the photo in the article, is original and emphasizes the individuality of the apartment owners. The work can be done with your own hands.

Drywall arches

One of the cheapest options for decorating an opening without a door is to use drywall. Material Features:

• it can be cut with a regular knife;
• due to the smooth and even surface of the material, its preparation is carried out in a minimal amount;
• the reverse side has a fairly high degree of adhesion to various adhesives;
• The service life of such material is 20 years of continuous operation.

To secure the cladding, you will need to install the frame of the arched structure. It is usually made from a metal profile. A mounting beam can also be used. First, the wall plasterboard is installed, and the facing plasterboard is installed on top.

Using waterproof putty, as well as a special tape, allows you to seal seams much faster. When choosing a material, it is worth considering that acrylic-based compositions have fairly high strength. In contrast, gypsum products can be sanded well. This property is especially important for paint and varnish processing of the arch.

Making an opening using plastic

In the process of designing doorless openings, plastic is often used. A variety of panels allows you to choose from a variety interesting options. Such products can imitate various textures, including wood and stone.

The plastic decor of an opening without a door is usually selected according to the pattern, as well as color and texture. This allows you to create an interior in which all the details will look as harmonious as possible. With the correct selection of material characteristics, you can visually increase the space.

There is no need to invite specialists when finishing the opening. If you have certain skills in such work, you can complete the entire process yourself.

Polyurethane stucco

Polyurethane stucco is often used to decorate doorless spaces between adjacent rooms. If the work is carried out in a small apartment, it is better to pay attention to materials that have a low-relief pattern. Volumetric stucco molding is appropriate only if there are high ceilings.

One of the advantages of polyurethane is the ability to paint it with any paint. For this reason, this coating is often used when decorating openings without doors. The material can be easily fixed using special glue.

Stone in finishing of openings

The stone is one of the most attractive and durable materials, which are used for interior decoration. It has a high degree of wear resistance and also has an excellent appearance. It is easy to attach with glue.

Artificial stone is inferior to natural stone in terms of service life, but its lightness compensates for this. This type of finish is also inexpensive. The construction market offers many models of artificial stone in different colors.

Stone cladding methods

There are several options for laying stone elements when lining an opening. One of the most common is the method of making edging with smooth edges. This cladding looks neat and stylish. The second option is torn edges. Before you begin installing the tiles, you should level all surfaces of the opening. To increase adhesion, the surface should be primed.

An interesting option is clinker cladding. Such products perfectly imitate ancient masonry with natural stone. Clinker masonry is characterized by increased wear resistance, as well as preservation of the original appearance of the material even after years of use.

How to choose the type of opening

According to designers, arched structures have great potential for increasing the visual appeal of the opening. This makes the premises look more interesting. It is especially worth thinking about making an arched doorless opening in the case of narrow corridor. Thanks to this solution, you can improve not only the interior design, but also increase the convenience of moving around the apartment.

If the apartment has standard ceilings, you can make an arch that has a slight rounding. Typically, the radius of such structures is selected based on the size of the doorway. The radius should be twice the width of the free space under the arch.

Important! Gentle arches visually enlarge the space, raise the ceiling, and can also be combined with many interior styles.

To design an opening with high ceiling, you can use arches of unconventional shape. For example, they are trapezoidal, elliptical and asymmetrical. If, for example, an arch is erected over the space between the corridor and the living room, you can make it in the form of a structure with slopes that imitate half-columns.

Openings made in Baroque or Empire style look interesting. If the apartment is small, do not overload the space small elements. This will visually reduce the space.

Many designers pay more attention to symmetrical designs. If you decorate such an opening with low-relief polyurethane stucco molding, you can get great view. To make an arch, you should understand the rules for working with drywall, and also purchase necessary materials for the frame.

Restrictions

When arranging the opening between rooms, you should take into account certain rules work. There are several limitations that require careful attention. For example, apartments often have block partitions, in which the door frame is a power element supporting the wall. In this case, its dismantling may lead to subsidence of the partition and the appearance of cracks. For this reason, such openings are first strengthened.

Such frames ensure uniform distribution of the load on the walls. For example, it increases if the opening is trimmed with stone. You should also think about the environmental friendliness of materials. If you buy too cheap products without thinking about their quality, the consequences can be unpleasant.

Conclusions

Thus, finishing an opening without a door is a fairly popular method of arranging the space between two rooms. This allows you to complement the interior with interesting details, as well as visually enlarge the space. There are quite a large number of options for finishing openings.

Arched structures are very attractive and can be installed in apartments of any style. However, when choosing this option, it is worth considering the features of the layout of the living space.

Materials for finishing the opening can be very different - polyurethane stucco, stones, clinker tiles, plastic panels. This variety allows you to choose the most suitable option for your apartment.

Having decided to get rid of traditional doors, you cannot avoid the question of how you can design the resulting arch? In this article we will look at how you can make it beautiful without doors using various materials yourself.

Why are openings made?

1. In some buildings, open doorways are part of load-bearing wall. It cannot be removed; all that remains is to decorate it or turn it into a built-in closet or niche.
2. Open doorways are also made to visually unite several rooms: kitchen and living room, office and bedroom, living room and hallway.
3. In open-plan rooms, such openings divide the area into functional zones.

In addition, open doorways visually increase the space; they do not need to be maintained like traditional doors; they can be interestingly decorated and given an original shape. But this option is unacceptable for those who want to retire from everyone.

Door niche shape

• Rectangular. This design requires mandatory finishing, installation of platbands and framing. It can be finished with wooden or plastic panels with similar platbands, decorate with stucco or decorative stone.

• Arched design. It can have a rounded, trapezoidal, ellipsoidal arch, etc. Such an opening visually expands the space, so it is advantageous to make it in narrow rooms. In principle, you can use drywall.

Advice! When planning to decorate an arched opening, avoid “heavy” and “bulky” cladding methods (stucco molding or stone with large patterns).

• Imitation of an arch. In appearance it is similar to an arch, but is made from semicircular ready-made segments that can be bought at any store. They are fixed in the corners of the niche and decorated in any way.

How to highlight an arched opening

The finishing of interior openings is done in order to attract attention. There are several design solutions, which will help highlight the arch:

Advice! If you want the entrance opening to look unusual and original, give it an unusual shape using drywall: ellipsoidal, sloped in one direction, a figured entrance with shelves, etc.

How to divert attention from a doorway

There are situations when it is necessary to visually hide a doorway. To do this, you can resort to some tricks:

1. Drywall without additional finishing, i.e. painted white, will help make the entrance “inconspicuous”. Many people hang a cornice with curtains over such an opening, decorated with bright patterns and interesting prints that will distract attention to themselves.
2. A wicker frame in the form of lambrequins made of thick threads will also help to merge with the overall interior.

How to decorate a doorway with stone

Decorate door arch stone great option For:

1. Large, spacious rooms;
2. Premises with a small number of furniture;
3. If you need to hide any wall defects.

The process of decorating a doorway with stone is as follows:

• The surface must be prepared: removed from the old coating, plastered and primed.
• Markings are made on the wall for decorative stone, making the design larger at the bottom and smaller at the top. Then the selected area needs to be primed.
• Then a decorative stone is laid out on a flat surface to visually see the combination of colors and the intended pattern.
• Artificial stone is glued to the wall using tile adhesive or liquid nails. You need to start from the bottom corner. If the vertical edge of the opening is lined with stone, then it is glued close to the platband.

Advice! To masonry looked more organic, sharp corners can be sanded with sandpaper.

• After the glue has dried, the decorative stone is coated with varnish or special composition, consisting of tinting paste, water and acrylic varnish.
• At the end, the plinth is glued to the floor and the trim is installed.

Finishing the interior doorway with MDF

In appearance, MDF is similar to natural wood. An opening decorated with MDF boards looks especially elegant and will suit any style. In addition, they are very easy to install; even a beginner can do it, adhering to the following sequence:

• It is necessary to repair cracks and chips in the doorway, and then nail the guide rails along the edge.
• Next, you need to determine the width of the workpiece; to do this, attach the platband to the slope from the outside, the resulting distance will be equal to the width of the slope.
  In this case, it is necessary to take into account the width of the finishing corner along the edge of the casing.

• Now you can cut the strip for the upper slope using a jigsaw. Using self-tapping screws, we attach it to the slats.
• The side slopes are installed in the same way.
• Next, glue along the perimeter of the opening decorative corners, and then cover them with a platband.
• The gaps between the slopes are sealed with putty to match the color of the wood.

Decorating a doorway with plastic

This is one of the most affordable and inexpensive ways finishing. In addition to the price, its advantages include diversity color solutions and textures, which allows the material to fit into any interior. In addition, plastic is not afraid of mechanical and chemical influences and is easy to clean. There are two ways to install such panels:

1. By analogy with MDF boards, i.e. attach to a wooden frame. However, this method can easily damage the texture of the plastic.
2. Provided that the slopes of the opening are smooth and plastered, the plastic is attached to the base using liquid nails. The ends of the plastic are closed with special plastic corners. They are attached to liquid nails; just press them onto the surface using steam.

Other design options for arched openings.

Stucco molding. It can be made of gypsum and polyurethane. The first option is practically not used today, because such panels are very heavy, difficult to install, and also very brittle material, if it falls, it will simply break. Polyurethane is no different in appearance from gypsum, but it is lighter and is glued to any surface using liquid nails.

However, this method of decoration is not very appropriate in small apartments with narrow doorways. Polyurethane stucco molding is available in white; later it can be painted with regular paint. water-based paint in any color.

Plasterboard. With its help, the niche can be given any shape and get a perfectly smooth surface. Drywall is attached to a special metal profile using self-tapping screws, and the corners are closed with corners. After installation, it is primed and puttied in three layers. Then the opening can be covered with wallpaper or painted to match the main walls.

Natural wood. This is the most expensive finishing option. But the result is worth the investment, because... natural wood gives the interior a special chic, comfort and respectability. Moreover, it is an environmentally friendly, harmless material that does not cause allergies. But you can use cheaper types of wood, varnishing it like oak or walnut, while appearance it won't have any effect.

Decorating a doorway beautifully is not such a difficult task. There are plenty of options to make it fit into the style of your home and transform the room into... better side, just use your imagination and use our advice.

Design of arches in an apartment: photo

How to design a doorway: photo